Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Is this a proxy?
• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;

import {Multicall} from "../lib/openzeppelin-contracts/contracts/utils/Multicall.sol";
import {ReentrancyGuard} from "../lib/openzeppelin-contracts/contracts/utils/ReentrancyGuard.sol";
import {Ownable} from "../lib/openzeppelin-contracts/contracts/access/Ownable.sol";
import {Ownable2Step} from "../lib/openzeppelin-contracts/contracts/access/Ownable2Step.sol";
import {IERC20} from "../lib/openzeppelin-contracts/contracts/interfaces/IERC20.sol";
import {SafeERC20} from "../lib/openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";
import {BlastManager} from "./libraries/BlastManager.sol";

contract Lockup is Ownable2Step, ReentrancyGuard, Multicall, BlastManager {
    using SafeERC20 for IERC20;

    /* Immutables */
    address public TOKEN;

    /* Events */
    event Withdraw(address indexed to, uint256 amount);

    /* Constructor */
    constructor(address token, address owner) Ownable(owner) {
        require(token != address(0), "Lockup: invalid token address");
        TOKEN = token;
    }

    /**
     * @notice Withdraw locked up token
     * @param to The address to send the token to
     * @param amount The amount of tokens to withdraw
     */
    function withdraw(address to, uint256 amount) external onlyOwner nonReentrant {
        IERC20(TOKEN).safeTransfer(to, amount);
        emit Withdraw(to, amount);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Multicall.sol)

pragma solidity ^0.8.20;

import {Address} from "./Address.sol";
import {Context} from "./Context.sol";

/**
 * @dev Provides a function to batch together multiple calls in a single external call.
 *
 * Consider any assumption about calldata validation performed by the sender may be violated if it's not especially
 * careful about sending transactions invoking {multicall}. For example, a relay address that filters function
 * selectors won't filter calls nested within a {multicall} operation.
 *
 * NOTE: Since 5.0.1 and 4.9.4, this contract identifies non-canonical contexts (i.e. `msg.sender` is not {_msgSender}).
 * If a non-canonical context is identified, the following self `delegatecall` appends the last bytes of `msg.data`
 * to the subcall. This makes it safe to use with {ERC2771Context}. Contexts that don't affect the resolution of
 * {_msgSender} are not propagated to subcalls.
 */
abstract contract Multicall is Context {
    /**
     * @dev Receives and executes a batch of function calls on this contract.
     * @custom:oz-upgrades-unsafe-allow-reachable delegatecall
     */
    function multicall(bytes[] calldata data) external virtual returns (bytes[] memory results) {
        bytes memory context = msg.sender == _msgSender()
            ? new bytes(0)
            : msg.data[msg.data.length - _contextSuffixLength():];

        results = new bytes[](data.length);
        for (uint256 i = 0; i < data.length; i++) {
            results[i] = Address.functionDelegateCall(address(this), bytes.concat(data[i], context));
        }
        return results;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable2Step.sol)

pragma solidity ^0.8.20;

import {Ownable} from "./Ownable.sol";

/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is specified at deployment time in the constructor for `Ownable`. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2Step is Ownable {
    address private _pendingOwner;

    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() public virtual {
        address sender = _msgSender();
        if (pendingOwner() != sender) {
            revert OwnableUnauthorizedAccount(sender);
        }
        _transferOwnership(sender);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;

import {IBlast} from "../interfaces/IBlast.sol";
import {IBlastPoints} from "../interfaces/IBlastPoints.sol";

contract BlastManager {
    IBlast public constant BLAST = IBlast(0x4300000000000000000000000000000000000002);
    address public manager;

    modifier onlyManager() {
        require(msg.sender == manager, "Blast: not manager");
        _;
    }

    constructor() {
        manager = msg.sender;
        BLAST.configureClaimableGas();
    }

    function claimGas(address recipient, bool isMax) external onlyManager returns (uint256) {
        if (isMax) {
            return BLAST.claimMaxGas(address(this), recipient);
        } else {
            return BLAST.claimAllGas(address(this), recipient);
        }
    }

    function setManager(address _manager) external onlyManager {
        require(_manager != address(0), "BlastManager: invalid token address");
        manager = _manager;
    }

    function setGasMode(address blastGas) external onlyManager {
        IBlast(blastGas).configureClaimableGas();
    }

    function setPointsOperator(address blastPoints, address operator) external onlyManager {
        IBlastPoints(blastPoints).configurePointsOperator(operator);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;

enum YieldMode {
    AUTOMATIC,
    DISABLED,
    CLAIMABLE
}

enum GasMode {
    VOID,
    CLAIMABLE
}

interface IBlast {
    // configure
    function configureContract(
        address contractAddress,
        YieldMode _yield,
        GasMode gasMode,
        address governor
    ) external;

    function configure(
        YieldMode _yield,
        GasMode gasMode,
        address governor
    ) external;

    // base configuration options
    function configureClaimableYield() external;

    function configureClaimableYieldOnBehalf(address contractAddress) external;

    function configureAutomaticYield() external;

    function configureAutomaticYieldOnBehalf(address contractAddress) external;

    function configureVoidYield() external;

    function configureVoidYieldOnBehalf(address contractAddress) external;

    function configureClaimableGas() external;

    function configureClaimableGasOnBehalf(address contractAddress) external;

    function configureVoidGas() external;

    function configureVoidGasOnBehalf(address contractAddress) external;

    function configureGovernor(address _governor) external;

    function configureGovernorOnBehalf(
        address _newGovernor,
        address contractAddress
    ) external;

    // claim yield
    function claimYield(
        address contractAddress,
        address recipientOfYield,
        uint256 amount
    ) external returns (uint256);

    function claimAllYield(
        address contractAddress,
        address recipientOfYield
    ) external returns (uint256);

    // claim gas
    function claimAllGas(
        address contractAddress,
        address recipientOfGas
    ) external returns (uint256);

    function claimGasAtMinClaimRate(
        address contractAddress,
        address recipientOfGas,
        uint256 minClaimRateBips
    ) external returns (uint256);

    function claimMaxGas(
        address contractAddress,
        address recipientOfGas
    ) external returns (uint256);

    function claimGas(
        address contractAddress,
        address recipientOfGas,
        uint256 gasToClaim,
        uint256 gasSecondsToConsume
    ) external returns (uint256);

    // read functions
    function readClaimableYield(
        address contractAddress
    ) external view returns (uint256);

    function readYieldConfiguration(
        address contractAddress
    ) external view returns (uint8);

    function readGasParams(
        address contractAddress
    )
        external
        view
        returns (
            uint256 etherSeconds,
            uint256 etherBalance,
            uint256 lastUpdated,
            GasMode
        );
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;

interface IBlastPoints {
    /**
     * @notice Blast standard: configure for blast point operator address
     * @param operator the blast points operator address
     */
    function configurePointsOperator(address operator) external;
}

{
  "remappings": [
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "ds-test/=lib/openzeppelin-contracts/lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 2000
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[],"name":"BLAST","outputs":[{"internalType":"contract IBlast","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"TOKEN","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"bool","name":"isMax","type":"bool"}],"name":"claimGas","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"manager","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes[]","name":"data","type":"bytes[]"}],"name":"multicall","outputs":[{"internalType":"bytes[]","name":"results","type":"bytes[]"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"blastGas","type":"address"}],"name":"setGasMode","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_manager","type":"address"}],"name":"setManager","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"blastPoints","type":"address"},{"internalType":"address","name":"operator","type":"address"}],"name":"setPointsOperator","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000a027a3a04b44f79560153234e999b17c88e22db9000000000000000000000000ca95fd7170a58f6d25ebba21220c02c0cb434006

-----Decoded View---------------
Arg [0] : token (address): 0xa027a3A04b44f79560153234E999b17C88e22DB9
Arg [1] : owner (address): 0xCa95Fd7170A58f6d25ebBa21220c02c0cb434006

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 000000000000000000000000a027a3a04b44f79560153234e999b17c88e22db9
Arg [1] : 000000000000000000000000ca95fd7170a58f6d25ebba21220c02c0cb434006