Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

import {SwapParams, SwapDirection} from "../CommonTypes.sol";
import {IERC20} from "@openzeppelin/contracts/interfaces/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IWETH} from "../interfaces/IWETH.sol";
import {Swapper} from "../../src/swappers/Swapper.sol";
import {IV3SwapRouter} from "@uniswap/swap-router-contracts/contracts/interfaces/IV3SwapRouter.sol";

contract UniSwapper is Swapper {

    uint8 public constant ID = 0;
    address public uniswap_router;

    function setRouter(address _router) public onlyAdmin {
        uniswap_router = _router;
    }

    function swap(
        SwapParams memory swapParams
    ) external override onlyUtb returns (
        address tokenOut,
        uint256 amountOut
    ) {
        tokenOut = swapParams.tokenOut;

        if (swapParams.direction == SwapDirection.EXACT_IN) {
            amountOut = _swapExactIn(swapParams);
        } else {
            _swapExactOut(swapParams);
            amountOut = swapParams.amountOut;
        }
    }

    modifier routerIsSet() {
        if (uniswap_router == address(0)) revert RouterNotSet();
        _;
    }

    function _swapExactIn(
        SwapParams memory swapParams // SwapParams is a struct
    ) private routerIsSet returns (uint256 amountOut) {
        swapParams = _receiveAndWrapIfNeeded(swapParams);

        IV3SwapRouter.ExactInputParams memory params = IV3SwapRouter
            .ExactInputParams({
                path: swapParams.additionalArgs,
                recipient: address(this),
                amountIn: swapParams.amountIn,
                amountOutMinimum: swapParams.amountOut
            });

        SafeERC20.forceApprove(IERC20(swapParams.tokenIn), uniswap_router, swapParams.amountIn);
        amountOut = IV3SwapRouter(uniswap_router).exactInput(params);

        _sendToUtb(swapParams.tokenOut, amountOut);
    }

    function _swapExactOut(
        SwapParams memory swapParams
    ) private routerIsSet returns (uint256 amountIn) {
        swapParams = _receiveAndWrapIfNeeded(swapParams);

        IV3SwapRouter.ExactOutputParams memory params = IV3SwapRouter
            .ExactOutputParams({
                path: swapParams.additionalArgs,
                recipient: address(this),
                //deadline: block.timestamp,
                amountOut: swapParams.amountOut,
                amountInMaximum: swapParams.amountIn
            });

        SafeERC20.forceApprove(IERC20(swapParams.tokenIn), uniswap_router, swapParams.amountIn);
        amountIn = IV3SwapRouter(uniswap_router).exactOutput(params);

        _refundUser(
            swapParams.refund,
            swapParams.tokenIn,
            params.amountInMaximum - amountIn
        );

        _sendToUtb(swapParams.tokenOut, swapParams.amountOut);
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

library SwapDirection {
    uint8 constant EXACT_IN = 0;
    uint8 constant EXACT_OUT = 1;
}

struct SwapParams {
    uint256 amountIn;
    uint256 amountOut;
    uint256 dustOut;
    address tokenIn;
    address tokenOut;
    uint8 direction;
    address refund;
    bytes additionalArgs;
}

struct SwapInstructions {
    uint8 swapperId;
    SwapParams swapParams;
}

struct SwapAndExecuteInstructions {
    SwapInstructions swapInstructions;
    address target;
    address paymentOperator;
    address refund;
    uint256 executionFee;
    bytes payload;
    bytes32 txId;
}

struct BridgeInstructions {
    SwapInstructions preBridge;
    SwapInstructions postBridge;
    uint8 bridgeId;
    uint256 dstChainId;
    address target;
    address paymentOperator;
    address refund;
    bytes payload;
    bytes additionalArgs;
    bytes32 txId;
}

struct FeeData {
    bytes4 appId;
    bytes4 affiliateId;
    uint256 bridgeFee;
    uint256 deadline;
    uint256 chainId;
    Fee[] appFees;
}

struct Fee {
    address recipient;
    address token;
    uint amount;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (interfaces/IERC20.sol)

pragma solidity ^0.8.0;

import "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

import {IERC20} from "@openzeppelin/contracts/interfaces/IERC20.sol";

interface IWETH is IERC20 {

    function deposit() external payable;

    function withdraw(uint) external;
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

import {UTBOwned} from "../UTBOwned.sol";
import {SwapDirection, SwapParams} from "../CommonTypes.sol";
import {IERC20} from "@openzeppelin/contracts/interfaces/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IWETH} from "../interfaces/IWETH.sol";
import {ISwapper} from "../UTB.sol";

abstract contract Swapper is UTBOwned, ISwapper {

    error SwapFailed();

    address payable public wrapped;

    function swap(
        SwapParams memory swapParams
    ) external virtual returns (
        address tokenOut,
        uint256 amountOut
    );

    function setWrapped(address payable _wrapped) public onlyAdmin {
        wrapped = _wrapped;
    }

    function _refundUser(address user, address token, uint amount) internal virtual {
        if ( amount > 0 ) {
            SafeERC20.safeTransfer(IERC20(token), user, amount);
        }
    }

    function _sendToUtb(
        address token,
        uint amount
    ) internal virtual {
        if (token == address(0)) {
            token = wrapped;
        }
        SafeERC20.safeTransfer(IERC20(token), utb, amount);
    }

    function _receiveAndWrapIfNeeded(
        SwapParams memory swapParams
    ) internal virtual returns (SwapParams memory _swapParams) {
        if (swapParams.tokenIn != address(0)) {
            SafeERC20.safeTransferFrom(
                IERC20(swapParams.tokenIn),
                msg.sender,
                address(this),
                swapParams.amountIn
            );
            return swapParams;
        }
        swapParams.tokenIn = wrapped;
        IWETH(wrapped).deposit{value: swapParams.amountIn}();
        return swapParams;
    }
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.7.5;
pragma abicoder v2;

import '@uniswap/v3-core/contracts/interfaces/callback/IUniswapV3SwapCallback.sol';

/// @title Router token swapping functionality
/// @notice Functions for swapping tokens via Uniswap V3
interface IV3SwapRouter is IUniswapV3SwapCallback {
    struct ExactInputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 amountIn;
        uint256 amountOutMinimum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another token
    /// @dev Setting `amountIn` to 0 will cause the contract to look up its own balance,
    /// and swap the entire amount, enabling contracts to send tokens before calling this function.
    /// @param params The parameters necessary for the swap, encoded as `ExactInputSingleParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInputSingle(ExactInputSingleParams calldata params) external payable returns (uint256 amountOut);

    struct ExactInputParams {
        bytes path;
        address recipient;
        uint256 amountIn;
        uint256 amountOutMinimum;
    }

    /// @notice Swaps `amountIn` of one token for as much as possible of another along the specified path
    /// @dev Setting `amountIn` to 0 will cause the contract to look up its own balance,
    /// and swap the entire amount, enabling contracts to send tokens before calling this function.
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactInputParams` in calldata
    /// @return amountOut The amount of the received token
    function exactInput(ExactInputParams calldata params) external payable returns (uint256 amountOut);

    struct ExactOutputSingleParams {
        address tokenIn;
        address tokenOut;
        uint24 fee;
        address recipient;
        uint256 amountOut;
        uint256 amountInMaximum;
        uint160 sqrtPriceLimitX96;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another token
    /// that may remain in the router after the swap.
    /// @param params The parameters necessary for the swap, encoded as `ExactOutputSingleParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutputSingle(ExactOutputSingleParams calldata params) external payable returns (uint256 amountIn);

    struct ExactOutputParams {
        bytes path;
        address recipient;
        uint256 amountOut;
        uint256 amountInMaximum;
    }

    /// @notice Swaps as little as possible of one token for `amountOut` of another along the specified path (reversed)
    /// that may remain in the router after the swap.
    /// @param params The parameters necessary for the multi-hop swap, encoded as `ExactOutputParams` in calldata
    /// @return amountIn The amount of the input token
    function exactOutput(ExactOutputParams calldata params) external payable returns (uint256 amountIn);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

import {Roles} from "./utils/Roles.sol";
import {Withdrawable} from "./utils/Withdrawable.sol";

contract UTBOwned is Roles, Withdrawable {
    address payable public utb;

    event SetUtb(address utb);

    error InvalidUtb();

    constructor() Roles(msg.sender) {}

    /**
     * @dev Limit access to the approved UTB.
     */
    modifier onlyUtb() {
        require(msg.sender == utb, "Only utb");
        _;
    }

    /**
     * @dev Sets the approved UTB.
     * @param _utb The address of the UTB.
     */
    function setUtb(address _utb) public onlyAdmin {
        if (_utb == address(0) || _utb.code.length == 0) revert InvalidUtb();
        utb = payable(_utb);
        emit SetUtb(_utb);
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

import {Roles} from "./utils/Roles.sol";
import {IUTB} from "./interfaces/IUTB.sol";
import {IUTBExecutor} from "./interfaces/IUTBExecutor.sol";
import {IERC20} from "@openzeppelin/contracts/interfaces/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import {IWETH} from "./interfaces/IWETH.sol";
import {IUTBFeeManager} from "./interfaces/IUTBFeeManager.sol";
import {IBridgeAdapter} from "./interfaces/IBridgeAdapter.sol";
import {ISwapper} from "./interfaces/ISwapper.sol";
import {SwapInstructions, SwapParams, FeeData, Fee, BridgeInstructions, SwapAndExecuteInstructions} from "./CommonTypes.sol";
import {Withdrawable} from "./utils/Withdrawable.sol";

contract UTB is IUTB, Roles, Withdrawable {
    constructor() Roles(msg.sender) {}

    IUTBExecutor public executor;
    IUTBFeeManager public feeManager;
    IWETH public wrapped;
    mapping(uint8 id => address swapper) public swappers;
    mapping(uint8 id => address bridgeAdapter) public bridgeAdapters;
    bool public isActive = true;

    /**
     * @dev only support calling swapAndExecute and bridgeAndExecute if active
     */
    modifier isUtbActive() {
        if (!isActive) revert UTBPaused();
        _;
    }

    modifier onlyWrapped() {
        if (msg.sender != address(wrapped)) revert OnlyWrapped();
        _;
    }

    /**
     * @dev Transfers fees from the sender to the fee recipients.
     * @param feeData The bridge fee in native, as well as utb fee tokens and amounts.
     * @param packedInfo The fees and swap instructions which were used to generate the signature.
     * @param signature The ECDSA signature to verify the fee structure.
     */
    function _retrieveAndCollectFees(
        FeeData calldata feeData,
        SwapParams memory swapParams,
        bytes memory packedInfo,
        bytes calldata signature
    ) private returns (uint256 value) {
        if (feeData.chainId != block.chainid) revert InvalidFees();
        if (block.timestamp > feeData.deadline) revert ExpiredFees();

        if (address(feeManager) != address(0)) {
            feeManager.verifySignature(packedInfo, signature);
            value += feeData.bridgeFee;
            Fee[] memory fees = feeData.appFees;
            for (uint i = 0; i < fees.length; i++) {
                Fee memory fee = fees[i];
                if (fee.token != address(0)) {
                    SafeERC20.safeTransferFrom(
                        IERC20(fee.token),
                        msg.sender,
                        fee.recipient,
                        fee.amount
                    );
                } else {
                    (bool success, ) = address(fee.recipient).call{value: fee.amount}("");
                    value += fee.amount;
                    if (!success) revert ProtocolFeeCannotBeFetched();
                }
            }
        }

        uint256 valueRequired = swapParams.tokenIn == address(0)
            ? swapParams.amountIn + value
            : value;

        if (msg.value < valueRequired) revert NotEnoughNative();
    }

    /**
     * @dev Refunds the specified refund address.
     * @param to The address receiving the refund.
     * @param amount The amount of the refund.
     */
    function _refundUser(address to, address token, uint256 amount) private {
        if ( amount > 0 ) {
            if (token == address(0)) {
                (bool success, ) = to.call{value: amount}("");
                if (!success) revert RefundFailed();
            } else {
                SafeERC20.safeTransfer(IERC20(token), to, amount);
            }
        }
    }

    /**
     * @dev Sets the executor.
     * @param _executor The address of the executor.
     */
    function setExecutor(address _executor) public onlyAdmin {
        executor = IUTBExecutor(_executor);
        emit SetExecutor(_executor);
    }

    /**
     * @dev Sets the wrapped native token.
     * @param _wrapped The address of the wrapped token.
     */
    function setWrapped(address _wrapped) public onlyAdmin {
        wrapped = IWETH(_wrapped);
        emit SetWrapped(_wrapped);
    }

    /**
     * @dev Sets the fee manager.
     * @param _feeManager The address of the fee manager.
     */
    function setFeeManager(address _feeManager) public onlyAdmin {
        feeManager = IUTBFeeManager(_feeManager);
        emit SetFeeManager(_feeManager);
    }

    /**
     * @dev toggles active state
     */
    function toggleActive() public onlyAdmin {
        isActive = !isActive;
        emit SetIsActive(isActive);
    }

    /**
     * @dev Checks if there is a swap being performed
     */
    function _isSwapping(SwapParams memory swapParams) private pure returns (bool) {
        return swapParams.additionalArgs.length != 0;
    }

    /**
     * @dev Checks if there is no swap being performed
     */
    function _isNotSwapping(SwapParams memory swapParams) private pure returns (bool) {
        return swapParams.tokenIn == swapParams.tokenOut;
    }

    /**
     * @dev Checks if there is a wrap being performed
     */
    function _isWrapping(SwapParams memory swapParams) private view returns (bool) {
        return swapParams.tokenIn == address(0) && swapParams.tokenOut == address(wrapped);
    }

    /**
     * @dev Checks if there is an unwrap being performed
     */
    function _isUnwrapping(SwapParams memory swapParams) private view returns (bool) {
        return swapParams.tokenIn == address(wrapped) && swapParams.tokenOut == address(0);
    }

    /**
     * @dev Performs a swap with the requested swapper and swap calldata.
     * @param swapInstructions The swapper ID and calldata to execute a swap.
     */
    function _performSwap(
        SwapInstructions memory swapInstructions
    ) private returns (address tokenOut, uint256 amountOut, uint256 value) {
        SwapParams memory swapParams = swapInstructions.swapParams;

        (tokenOut, amountOut, value) = _swapHandler(swapInstructions);

        amountOut -= swapParams.dustOut;

        _refundUser(
            swapParams.refund,
            tokenOut,
            swapParams.dustOut
        );
    }

    /**
     * @dev Routes swap operations to the appropriate handler based on the swap type
     * @param swapInstructions The swap instructions containing swap parameters and swapper ID
     */
    function _swapHandler(
        SwapInstructions memory swapInstructions
    ) private returns (address tokenOut, uint256 amountOut, uint256 value) {
        SwapParams memory swapParams = swapInstructions.swapParams;

        if (_isSwapping(swapParams)) {
            return _handleSwap(swapParams, swappers[swapInstructions.swapperId]);
        }

        if (_isNotSwapping(swapParams)) {
            return _handleNoSwap(swapParams);
        }

        if (_isWrapping(swapParams)) {
            return _handleWrap(swapParams);
        }

        if (_isUnwrapping(swapParams)) {
            return _handleUnwrap(swapParams);
        }

        revert InvalidSwapParams();
    }

    /**
     * @dev Handles a swap operation using the specified swapper contract.
     * @param swapParams The swap parameters containing token addresses and amounts.
     * @param swapper The address of the swapper contract to execute the swap.
     */
    function _handleSwap(
        SwapParams memory swapParams,
        address swapper
    ) private returns (address tokenOut, uint256 amountOut, uint256 value) {
        if (swapParams.tokenIn == address(0)) {
            wrapped.deposit{value: swapParams.amountIn}();
            value = swapParams.amountIn;
            swapParams.tokenIn = address(wrapped);
        } else {
            SafeERC20.safeTransferFrom(
                IERC20(swapParams.tokenIn),
                msg.sender,
                address(this),
                swapParams.amountIn
            );
        }

        SafeERC20.forceApprove(IERC20(swapParams.tokenIn), swapper, swapParams.amountIn);

        (tokenOut, amountOut) = ISwapper(swapper).swap(swapParams);

        if (tokenOut == address(0)) {
            wrapped.withdraw(amountOut);
        }
    }

    /**
     * @dev Handles a direct transfer when input and output tokens are the same.
     * @param swapParams The swap parameters containing token addresses and amounts.
     */
    function _handleNoSwap(
        SwapParams memory swapParams
    ) private returns (address tokenOut, uint256 amountOut, uint256 value) {
        if (swapParams.tokenIn == address(0)) {
            return (address(0), swapParams.amountIn, swapParams.amountIn);
        } else {
            SafeERC20.safeTransferFrom(
                IERC20(swapParams.tokenIn),
                msg.sender,
                address(this),
                swapParams.amountIn
            );
            return (swapParams.tokenIn, swapParams.amountIn, 0);
        }
    }

    /**
     * @dev Handles wrapping of native tokens to wrapped tokens.
     * @param swapParams The swap parameters containing token addresses and amounts.
     */
    function _handleWrap(
        SwapParams memory swapParams
    ) private returns (address tokenOut, uint256 amountOut, uint256 value) {
        wrapped.deposit{value: swapParams.amountIn}();
        return (address(wrapped), swapParams.amountIn, swapParams.amountIn);
    }

    /**
     * @dev Handles unwrapping of wrapped tokens to native tokens.
     * @param swapParams The swap parameters containing token addresses and amounts.
     */
    function _handleUnwrap(
        SwapParams memory swapParams
    ) private returns (address tokenOut, uint256 amountOut, uint256 value) {
        SafeERC20.safeTransferFrom(
            IERC20(wrapped),
            msg.sender,
            address(this),
            swapParams.amountIn
        );
        wrapped.withdraw(swapParams.amountIn);
        return (address(0), swapParams.amountIn, 0);
    }

    /// @inheritdoc IUTB
    function swapAndExecute(
        SwapAndExecuteInstructions calldata instructions,
        FeeData calldata feeData,
        bytes calldata signature
    )
        public
        payable
        isUtbActive
    {
        emit Swapped(
            instructions.txId,
            feeData.appId,
            TxInfo({
                amountIn: instructions.swapInstructions.swapParams.amountIn,
                tokenIn: instructions.swapInstructions.swapParams.tokenIn,
                tokenOut: instructions.swapInstructions.swapParams.tokenOut,
                target: instructions.target,
                affiliateId: feeData.affiliateId,
                fees: feeData.appFees
            })
        );

        uint256 value = _retrieveAndCollectFees(
            feeData,
            instructions.swapInstructions.swapParams,
            abi.encode(instructions, feeData),
            signature
        );

        value += _swapAndExecute(
            instructions.swapInstructions,
            instructions.target,
            instructions.paymentOperator,
            instructions.payload,
            instructions.refund,
            instructions.executionFee
        );

        _refundUser(instructions.refund, address(0), msg.value - value);
    }

    /**
     * @dev Swaps currency from the incoming to the outgoing token and executes a transaction with payment.
     * @param swapInstructions The swapper ID and calldata to execute a swap.
     * @param target The address of the target contract for the payment transaction.
     * @param paymentOperator The operator address for payment transfers requiring ERC20 approvals.
     * @param payload The calldata to execute the payment transaction.
     * @param refund The account receiving any refunds, typically the EOA which initiated the transaction.
     * @param executionFee Forwards additional native fees required for executing the payment transaction.
     */
    function _swapAndExecute(
        SwapInstructions memory swapInstructions,
        address target,
        address paymentOperator,
        bytes memory payload,
        address refund,
        uint256 executionFee
    ) private returns (uint256 value) {
        address tokenOut;
        uint256 amountOut;
        (tokenOut, amountOut, value) = _performSwap(swapInstructions);
        if (executionFee > 0) value += executionFee;
        if (tokenOut == address(0)) {
            executor.execute{value: amountOut + executionFee}(
                target,
                paymentOperator,
                payload,
                tokenOut,
                amountOut,
                refund,
                executionFee
            );
        } else {
            SafeERC20.forceApprove(IERC20(tokenOut), address(executor), amountOut);
            executor.execute{value: executionFee}(
                target,
                paymentOperator,
                payload,
                tokenOut,
                amountOut,
                refund,
                executionFee
            );
        }
    }

    /**
     * @dev Checks if the bridge token is native, and approves the bridge adapter to transfer ERC20 if required.
     * @param instructions The bridge data, token swap data, and payment transaction payload.
     * @param amt2Bridge The amount of the bridge token being transferred to the bridge adapter.
     */
    function _approveAndCheckIfNative(
        BridgeInstructions memory instructions,
        uint256 amt2Bridge
    ) private returns (bool) {
        IBridgeAdapter bridgeAdapter = IBridgeAdapter(bridgeAdapters[instructions.bridgeId]);
        address bridgeToken = bridgeAdapter.getBridgeToken(
            instructions.additionalArgs
        );
        if (bridgeToken != address(0)) {
            SafeERC20.forceApprove(IERC20(bridgeToken), address(bridgeAdapter), amt2Bridge);
            return false;
        }
        return true;
    }

    /// @inheritdoc IUTB
    function bridgeAndExecute(
        BridgeInstructions memory instructions,
        FeeData calldata feeData,
        bytes calldata signature
    )
        public
        payable
        isUtbActive
    {
        emit BridgeCalled(
            instructions.txId,
            feeData.appId,
            instructions.dstChainId,
            TxInfo({
                amountIn: instructions.preBridge.swapParams.amountIn,
                tokenIn: instructions.preBridge.swapParams.tokenIn,
                tokenOut: instructions.postBridge.swapParams.tokenOut,
                target: instructions.target,
                affiliateId: feeData.affiliateId,
                fees: feeData.appFees
            })
        );

        uint256 feeValue = _retrieveAndCollectFees(
            feeData,
            instructions.preBridge.swapParams,
            abi.encode(instructions, feeData),
            signature
        );

        ( , uint256 amt2Bridge, uint256 swapValue) = _performSwap(instructions.preBridge);

        instructions.postBridge.swapParams.amountIn = amt2Bridge;

        _refundUser(instructions.refund, address(0), msg.value - feeValue - swapValue);

        _callBridge(amt2Bridge, feeData.bridgeFee, instructions);
    }

    /**
     * @dev Calls the bridge adapter to bridge funds, and approves the bridge adapter to transfer ERC20 if required.
     * @param amt2Bridge The amount of the bridge token being bridged via the bridge adapter.
     * @param bridgeFee The fee being transferred to the bridge adapter and finally to the bridge.
     * @param instructions The bridge data, token swap data, and payment transaction payload.
     */
    function _callBridge(
        uint256 amt2Bridge,
        uint bridgeFee,
        BridgeInstructions memory instructions
    ) private {
        bool native = _approveAndCheckIfNative(instructions, amt2Bridge);

        IBridgeAdapter(bridgeAdapters[instructions.bridgeId]).bridge{
            value: bridgeFee + (native ? amt2Bridge : 0)
        }(
            IBridgeAdapter.BridgeCall({
                amount: amt2Bridge,
                postBridge: instructions.postBridge,
                dstChainId: instructions.dstChainId,
                target: instructions.target,
                paymentOperator: instructions.paymentOperator,
                payload: instructions.payload,
                additionalArgs: instructions.additionalArgs,
                refund: instructions.refund,
                txId: instructions.txId
            })
        );
    }

    /// @inheritdoc IUTB
    function receiveFromBridge(
        SwapInstructions memory postBridge,
        address target,
        address paymentOperator,
        bytes memory payload,
        address refund,
        uint8 bridgeId,
        bytes32 txId
    ) public payable {
        if (msg.sender != bridgeAdapters[bridgeId]) revert OnlyBridgeAdapter();
        emit ReceivedFromBridge(txId);
        _swapAndExecute(postBridge, target, paymentOperator, payload, refund, 0);
    }

    /// @inheritdoc IUTB
    function registerSwapper(address swapper) public onlyAdmin {
        ISwapper s = ISwapper(swapper);
        swappers[s.ID()] = swapper;
        emit RegisteredSwapper(swapper);
    }

    /// @inheritdoc IUTB
    function registerBridge(address bridge) public onlyAdmin {
        IBridgeAdapter b = IBridgeAdapter(bridge);
        bridgeAdapters[b.ID()] = bridge;
        emit RegisteredBridgeAdapter(bridge);
    }

    receive() external payable onlyWrapped {}
}

// SPDX-License-Identifier: GPL-2.0-or-later
pragma solidity >=0.5.0;

/// @title Callback for IUniswapV3PoolActions#swap
/// @notice Any contract that calls IUniswapV3PoolActions#swap must implement this interface
interface IUniswapV3SwapCallback {
    /// @notice Called to `msg.sender` after executing a swap via IUniswapV3Pool#swap.
    /// @dev In the implementation you must pay the pool tokens owed for the swap.
    /// The caller of this method must be checked to be a UniswapV3Pool deployed by the canonical UniswapV3Factory.
    /// amount0Delta and amount1Delta can both be 0 if no tokens were swapped.
    /// @param amount0Delta The amount of token0 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token0 to the pool.
    /// @param amount1Delta The amount of token1 that was sent (negative) or must be received (positive) by the pool by
    /// the end of the swap. If positive, the callback must send that amount of token1 to the pool.
    /// @param data Any data passed through by the caller via the IUniswapV3PoolActions#swap call
    function uniswapV3SwapCallback(
        int256 amount0Delta,
        int256 amount1Delta,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;
import {AccessControlDefaultAdminRules} from "@openzeppelin/contracts/access/AccessControlDefaultAdminRules.sol";

abstract contract Roles is AccessControlDefaultAdminRules {
    constructor(address admin) AccessControlDefaultAdminRules(
      24 hours /* initialDelay */,
      admin /* initialDefaultAdmin */
    ) {}

    modifier onlyAdmin() {
        require(hasRole(DEFAULT_ADMIN_ROLE, msg.sender), "Only admin");
        _;
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

import {Roles} from "./Roles.sol";
import {IERC20} from "@openzeppelin/contracts/interfaces/IERC20.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

abstract contract Withdrawable is Roles {
    /// @notice Thrown when a native currency withdrawal fails
    error WithdrawalFailed();

    /// @notice Emitted when ERC20 tokens are withdrawn from the contract
    event WithdrawERC20(address token, address to, uint256 amount);

    /// @notice Thrown when recipient address is zero
    error InvalidRecipient();

    /// @notice Emitted when native currency is withdrawn from the contract
    event Withdraw(address to, uint256 amount);

    /**
     * @notice Allows admin to withdraw any ERC20 tokens stuck in the contract
     * @param token The ERC20 token address to withdraw
     * @param to The address to send the tokens to
     * @param amount The amount of tokens to withdraw
     */
    function withdrawERC20(address token, address to, uint256 amount) external onlyAdmin {
        if (to == address(0)) revert InvalidRecipient();
        SafeERC20.safeTransfer(IERC20(token), to, amount);
        emit WithdrawERC20(token, to, amount);
    }

    /**
     * @notice Allows admin to withdraw any native currency stuck in the contract
     * @param to The address to send the native currency to
     * @param amount The amount of native currency to withdraw
     */
    function withdraw(address to, uint256 amount) external onlyAdmin {
        if (to == address(0)) revert InvalidRecipient();
        (bool success, ) = to.call{value: amount}("");
        if (!success) revert WithdrawalFailed();
        emit Withdraw(to, amount);
    }
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

import {SwapInstructions, Fee, FeeData, BridgeInstructions, SwapAndExecuteInstructions} from "../CommonTypes.sol";

interface IUTB {

    struct TxInfo {
        uint256 amountIn;
        address tokenIn;
        address tokenOut;
        address target;
        bytes4 affiliateId;
        Fee[] fees;
    }

    event Swapped(
        bytes32 indexed txId,
        bytes4 indexed appId,
        TxInfo txInfo
    );

    event BridgeCalled(
        bytes32 indexed txId,
        bytes4 indexed appId,
        uint256 indexed dstChainId,
        TxInfo txInfo
    );

    event ReceivedFromBridge(bytes32 indexed txId);

    event SetExecutor(address executor);
    event SetWrapped(address wrapped);
    event SetFeeManager(address feeManager);
    event SetIsActive(bool isActive);
    event RegisteredSwapper(address swapper);
    event RegisteredBridgeAdapter(address bridge);

    /// @notice Thrown when protocol fees cannot be collected
    error ProtocolFeeCannotBeFetched();

    /// @notice Thrown when UTB is paused
    error UTBPaused();

    /// @notice Thrown when not enough native is passed for swap
    error NotEnoughNative();

    /// @notice Thrown when receive from bridge is not called from a bridge adapter
    error OnlyBridgeAdapter();

    /// @notice Thrown when native is transferred and the sender is not wrapped native
    error OnlyWrapped();

    /// @notice Thrown when the fee deadline has been passed
    error ExpiredFees();

    /// @notice Thrown when the fee data has invalid parameters
    error InvalidFees();

    /// @notice Thrown when the token mismatch
    error InvalidSwapParams();

    /// @notice Thrown when there is an unsuccessful refund
    error RefundFailed();

    /**
     * @dev Swaps currency from the incoming to the outgoing token and executes a transaction with payment.
     * @param instructions The token swap data and payment transaction payload.
     * @param feeData The bridge fee in native, as well as utb fee tokens and amounts.
     * @param signature The ECDSA signature to verify the fee structure.
     */
    function swapAndExecute(
        SwapAndExecuteInstructions memory instructions,
        FeeData memory feeData,
        bytes memory signature
    ) external payable;

    /**
     * @dev Bridges funds in native or ERC20 and a payment transaction payload to the destination chain
     * @param instructions The bridge data, token swap data, and payment transaction payload.
     * @param feeData The bridge fee in native, as well as utb fee tokens and amounts.
     * @param signature The ECDSA signature to verify the fee structure.
     */
    function bridgeAndExecute(
        BridgeInstructions memory instructions,
        FeeData memory feeData,
        bytes memory signature
    ) external payable;

    /**
     * @dev Receives funds from the bridge adapter, executes a swap, and executes a payment transaction.
     * @param postBridge The swapper ID and calldata to execute a swap.
     * @param target The address of the target contract for the payment transaction.
     * @param paymentOperator The operator address for payment transfers requiring ERC20 approvals.
     * @param payload The calldata to execute the payment transaction.
     * @param refund The account receiving any refunds, typically the EOA which initiated the transaction.
     */
    function receiveFromBridge(
        SwapInstructions memory postBridge,

        address target,
        address paymentOperator,
        bytes memory payload,
        address refund,
        uint8 bridgeId,
        bytes32 txId
    ) external payable;

    /**
     * @dev Registers and maps a bridge adapter to a bridge adapter ID.
     * @param bridge The address of the bridge adapter.
     */
    function registerBridge(address bridge) external;

    /**
     * @dev Registers and maps a swapper to a swapper ID.
     * @param swapper The address of the swapper.
     */
    function registerSwapper(address swapper) external;

    function setExecutor(address _executor) external;

    function setFeeManager(address _feeManager) external;

    function setWrapped(address _wrapped) external;
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

interface IUTBExecutor {

    event ExecutionSucceeded();

    error ExecutionFailed();

    error TransferFailed();

    /**
     * @dev Executes a payment transaction with native OR ERC20.
     * @param target The address of the target contract for the payment transaction.
     * @param paymentOperator The operator address for payment transfers requiring ERC20 approvals.
     * @param payload The calldata to execute the payment transaction.
     * @param token The token being transferred, zero address for native.
     * @param amount The amount of native or ERC20 being sent with the payment transaction.
     * @param refund The account receiving any refunds, typically the EOA that initiated the transaction.
     * @param executionFee Forwards additional native fees required for executing the payment transaction.
     */
    function execute(
        address target,
        address paymentOperator,
        bytes memory payload,
        address token,
        uint256 amount,
        address refund,
        uint256 executionFee
    ) external payable;
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

interface IUTBFeeManager {

    /// @notice Thrown if signature is zero address
    error ZeroSig();

    /// @notice Thrown if incorrect signature
    error WrongSig();

    /// @notice Thrown if sig length != 65
    error WrongSigLength();

    /// @notice Emitted when the signer address is updated
    event SetSigner(address signer);

    /**
     * @dev Verifies packed info containing fees in either native or ERC20.
     * @param packedInfo The fees and swap instructions used to generate the signature.
     * @param signature The ECDSA signature to verify the fee structure.
     */
    function verifySignature(
      bytes memory packedInfo,
      bytes memory signature
    ) external;

    /**
     * @dev Sets the signer used for fee verification.
     * @param _signer The address of the signer.
     */
    function setSigner(address _signer) external;
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

import {SwapInstructions} from "../CommonTypes.sol";

interface IBridgeAdapter {

    error NoDstBridge();

    struct BridgeCall {
        uint256 amount;
        SwapInstructions postBridge;
        uint256 dstChainId;
        address target;
        address paymentOperator;
        bytes payload;
        bytes additionalArgs;
        address refund;
        bytes32 txId;
    }

    function ID() external returns (uint8);

    function getBridgeToken(
        bytes calldata additionalArgs
    ) external returns (address);

    function bridge(BridgeCall memory bridgeCall) external payable;
}

// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.8.24;

import {SwapParams} from "../CommonTypes.sol";

interface ISwapper {
    error RouterNotSet();

    function ID() external returns (uint8);

    function swap(
      SwapParams memory swapParams
    ) external returns (
      address tokenOut, uint256 amountOut
    );
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/AccessControlDefaultAdminRules.sol)

pragma solidity ^0.8.0;

import "./AccessControl.sol";
import "./IAccessControlDefaultAdminRules.sol";
import "../utils/math/SafeCast.sol";
import "../interfaces/IERC5313.sol";

/**
 * @dev Extension of {AccessControl} that allows specifying special rules to manage
 * the `DEFAULT_ADMIN_ROLE` holder, which is a sensitive role with special permissions
 * over other roles that may potentially have privileged rights in the system.
 *
 * If a specific role doesn't have an admin role assigned, the holder of the
 * `DEFAULT_ADMIN_ROLE` will have the ability to grant it and revoke it.
 *
 * This contract implements the following risk mitigations on top of {AccessControl}:
 *
 * * Only one account holds the `DEFAULT_ADMIN_ROLE` since deployment until it's potentially renounced.
 * * Enforces a 2-step process to transfer the `DEFAULT_ADMIN_ROLE` to another account.
 * * Enforces a configurable delay between the two steps, with the ability to cancel before the transfer is accepted.
 * * The delay can be changed by scheduling, see {changeDefaultAdminDelay}.
 * * It is not possible to use another role to manage the `DEFAULT_ADMIN_ROLE`.
 *
 * Example usage:
 *
 * ```solidity
 * contract MyToken is AccessControlDefaultAdminRules {
 *   constructor() AccessControlDefaultAdminRules(
 *     3 days,
 *     msg.sender // Explicit initial `DEFAULT_ADMIN_ROLE` holder
 *    ) {}
 * }
 * ```
 *
 * _Available since v4.9._
 */
abstract contract AccessControlDefaultAdminRules is IAccessControlDefaultAdminRules, IERC5313, AccessControl {
    // pending admin pair read/written together frequently
    address private _pendingDefaultAdmin;
    uint48 private _pendingDefaultAdminSchedule; // 0 == unset

    uint48 private _currentDelay;
    address private _currentDefaultAdmin;

    // pending delay pair read/written together frequently
    uint48 private _pendingDelay;
    uint48 private _pendingDelaySchedule; // 0 == unset

    /**
     * @dev Sets the initial values for {defaultAdminDelay} and {defaultAdmin} address.
     */
    constructor(uint48 initialDelay, address initialDefaultAdmin) {
        require(initialDefaultAdmin != address(0), "AccessControl: 0 default admin");
        _currentDelay = initialDelay;
        _grantRole(DEFAULT_ADMIN_ROLE, initialDefaultAdmin);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlDefaultAdminRules).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC5313-owner}.
     */
    function owner() public view virtual returns (address) {
        return defaultAdmin();
    }

    ///
    /// Override AccessControl role management
    ///

    /**
     * @dev See {AccessControl-grantRole}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function grantRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        require(role != DEFAULT_ADMIN_ROLE, "AccessControl: can't directly grant default admin role");
        super.grantRole(role, account);
    }

    /**
     * @dev See {AccessControl-revokeRole}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function revokeRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        require(role != DEFAULT_ADMIN_ROLE, "AccessControl: can't directly revoke default admin role");
        super.revokeRole(role, account);
    }

    /**
     * @dev See {AccessControl-renounceRole}.
     *
     * For the `DEFAULT_ADMIN_ROLE`, it only allows renouncing in two steps by first calling
     * {beginDefaultAdminTransfer} to the `address(0)`, so it's required that the {pendingDefaultAdmin} schedule
     * has also passed when calling this function.
     *
     * After its execution, it will not be possible to call `onlyRole(DEFAULT_ADMIN_ROLE)` functions.
     *
     * NOTE: Renouncing `DEFAULT_ADMIN_ROLE` will leave the contract without a {defaultAdmin},
     * thereby disabling any functionality that is only available for it, and the possibility of reassigning a
     * non-administrated role.
     */
    function renounceRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        if (role == DEFAULT_ADMIN_ROLE && account == defaultAdmin()) {
            (address newDefaultAdmin, uint48 schedule) = pendingDefaultAdmin();
            require(
                newDefaultAdmin == address(0) && _isScheduleSet(schedule) && _hasSchedulePassed(schedule),
                "AccessControl: only can renounce in two delayed steps"
            );
            delete _pendingDefaultAdminSchedule;
        }
        super.renounceRole(role, account);
    }

    /**
     * @dev See {AccessControl-_grantRole}.
     *
     * For `DEFAULT_ADMIN_ROLE`, it only allows granting if there isn't already a {defaultAdmin} or if the
     * role has been previously renounced.
     *
     * NOTE: Exposing this function through another mechanism may make the `DEFAULT_ADMIN_ROLE`
     * assignable again. Make sure to guarantee this is the expected behavior in your implementation.
     */
    function _grantRole(bytes32 role, address account) internal virtual override {
        if (role == DEFAULT_ADMIN_ROLE) {
            require(defaultAdmin() == address(0), "AccessControl: default admin already granted");
            _currentDefaultAdmin = account;
        }
        super._grantRole(role, account);
    }

    /**
     * @dev See {AccessControl-_revokeRole}.
     */
    function _revokeRole(bytes32 role, address account) internal virtual override {
        if (role == DEFAULT_ADMIN_ROLE && account == defaultAdmin()) {
            delete _currentDefaultAdmin;
        }
        super._revokeRole(role, account);
    }

    /**
     * @dev See {AccessControl-_setRoleAdmin}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual override {
        require(role != DEFAULT_ADMIN_ROLE, "AccessControl: can't violate default admin rules");
        super._setRoleAdmin(role, adminRole);
    }

    ///
    /// AccessControlDefaultAdminRules accessors
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function defaultAdmin() public view virtual returns (address) {
        return _currentDefaultAdmin;
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function pendingDefaultAdmin() public view virtual returns (address newAdmin, uint48 schedule) {
        return (_pendingDefaultAdmin, _pendingDefaultAdminSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function defaultAdminDelay() public view virtual returns (uint48) {
        uint48 schedule = _pendingDelaySchedule;
        return (_isScheduleSet(schedule) && _hasSchedulePassed(schedule)) ? _pendingDelay : _currentDelay;
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function pendingDefaultAdminDelay() public view virtual returns (uint48 newDelay, uint48 schedule) {
        schedule = _pendingDelaySchedule;
        return (_isScheduleSet(schedule) && !_hasSchedulePassed(schedule)) ? (_pendingDelay, schedule) : (0, 0);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function defaultAdminDelayIncreaseWait() public view virtual returns (uint48) {
        return 5 days;
    }

    ///
    /// AccessControlDefaultAdminRules public and internal setters for defaultAdmin/pendingDefaultAdmin
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function beginDefaultAdminTransfer(address newAdmin) public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _beginDefaultAdminTransfer(newAdmin);
    }

    /**
     * @dev See {beginDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _beginDefaultAdminTransfer(address newAdmin) internal virtual {
        uint48 newSchedule = SafeCast.toUint48(block.timestamp) + defaultAdminDelay();
        _setPendingDefaultAdmin(newAdmin, newSchedule);
        emit DefaultAdminTransferScheduled(newAdmin, newSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function cancelDefaultAdminTransfer() public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _cancelDefaultAdminTransfer();
    }

    /**
     * @dev See {cancelDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _cancelDefaultAdminTransfer() internal virtual {
        _setPendingDefaultAdmin(address(0), 0);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function acceptDefaultAdminTransfer() public virtual {
        (address newDefaultAdmin, ) = pendingDefaultAdmin();
        require(_msgSender() == newDefaultAdmin, "AccessControl: pending admin must accept");
        _acceptDefaultAdminTransfer();
    }

    /**
     * @dev See {acceptDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _acceptDefaultAdminTransfer() internal virtual {
        (address newAdmin, uint48 schedule) = pendingDefaultAdmin();
        require(_isScheduleSet(schedule) && _hasSchedulePassed(schedule), "AccessControl: transfer delay not passed");
        _revokeRole(DEFAULT_ADMIN_ROLE, defaultAdmin());
        _grantRole(DEFAULT_ADMIN_ROLE, newAdmin);
        delete _pendingDefaultAdmin;
        delete _pendingDefaultAdminSchedule;
    }

    ///
    /// AccessControlDefaultAdminRules public and internal setters for defaultAdminDelay/pendingDefaultAdminDelay
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function changeDefaultAdminDelay(uint48 newDelay) public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _changeDefaultAdminDelay(newDelay);
    }

    /**
     * @dev See {changeDefaultAdminDelay}.
     *
     * Internal function without access restriction.
     */
    function _changeDefaultAdminDelay(uint48 newDelay) internal virtual {
        uint48 newSchedule = SafeCast.toUint48(block.timestamp) + _delayChangeWait(newDelay);
        _setPendingDelay(newDelay, newSchedule);
        emit DefaultAdminDelayChangeScheduled(newDelay, newSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function rollbackDefaultAdminDelay() public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _rollbackDefaultAdminDelay();
    }

    /**
     * @dev See {rollbackDefaultAdminDelay}.
     *
     * Internal function without access restriction.
     */
    function _rollbackDefaultAdminDelay() internal virtual {
        _setPendingDelay(0, 0);
    }

    /**
     * @dev Returns the amount of seconds to wait after the `newDelay` will
     * become the new {defaultAdminDelay}.
     *
     * The value returned guarantees that if the delay is reduced, it will go into effect
     * after a wait that honors the previously set delay.
     *
     * See {defaultAdminDelayIncreaseWait}.
     */
    function _delayChangeWait(uint48 newDelay) internal view virtual returns (uint48) {
        uint48 currentDelay = defaultAdminDelay();

        // When increasing the delay, we schedule the delay change to occur after a period of "new delay" has passed, up
        // to a maximum given by defaultAdminDelayIncreaseWait, by default 5 days. For example, if increasing from 1 day
        // to 3 days, the new delay will come into effect after 3 days. If increasing from 1 day to 10 days, the new
        // delay will come into effect after 5 days. The 5 day wait period is intended to be able to fix an error like
        // using milliseconds instead of seconds.
        //
        // When decreasing the delay, we wait the difference between "current delay" and "new delay". This guarantees
        // that an admin transfer cannot be made faster than "current delay" at the time the delay change is scheduled.
        // For example, if decreasing from 10 days to 3 days, the new delay will come into effect after 7 days.
        return
            newDelay > currentDelay
                ? uint48(Math.min(newDelay, defaultAdminDelayIncreaseWait())) // no need to safecast, both inputs are uint48
                : currentDelay - newDelay;
    }

    ///
    /// Private setters
    ///

    /**
     * @dev Setter of the tuple for pending admin and its schedule.
     *
     * May emit a DefaultAdminTransferCanceled event.
     */
    function _setPendingDefaultAdmin(address newAdmin, uint48 newSchedule) private {
        (, uint48 oldSchedule) = pendingDefaultAdmin();

        _pendingDefaultAdmin = newAdmin;
        _pendingDefaultAdminSchedule = newSchedule;

        // An `oldSchedule` from `pendingDefaultAdmin()` is only set if it hasn't been accepted.
        if (_isScheduleSet(oldSchedule)) {
            // Emit for implicit cancellations when another default admin was scheduled.
            emit DefaultAdminTransferCanceled();
        }
    }

    /**
     * @dev Setter of the tuple for pending delay and its schedule.
     *
     * May emit a DefaultAdminDelayChangeCanceled event.
     */
    function _setPendingDelay(uint48 newDelay, uint48 newSchedule) private {
        uint48 oldSchedule = _pendingDelaySchedule;

        if (_isScheduleSet(oldSchedule)) {
            if (_hasSchedulePassed(oldSchedule)) {
                // Materialize a virtual delay
                _currentDelay = _pendingDelay;
            } else {
                // Emit for implicit cancellations when another delay was scheduled.
                emit DefaultAdminDelayChangeCanceled();
            }
        }

        _pendingDelay = newDelay;
        _pendingDelaySchedule = newSchedule;
    }

    ///
    /// Private helpers
    ///

    /**
     * @dev Defines if an `schedule` is considered set. For consistency purposes.
     */
    function _isScheduleSet(uint48 schedule) private pure returns (bool) {
        return schedule != 0;
    }

    /**
     * @dev Defines if an `schedule` is considered passed. For consistency purposes.
     */
    function _hasSchedulePassed(uint48 schedule) private view returns (bool) {
        return schedule < block.timestamp;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/AccessControl.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";
import "../utils/Context.sol";
import "../utils/Strings.sol";
import "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address => bool) members;
        bytes32 adminRole;
    }

    mapping(bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with a standardized message including the required role.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     *
     * _Available since v4.1._
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual override returns (bool) {
        return _roles[role].members[account];
    }

    /**
     * @dev Revert with a standard message if `_msgSender()` is missing `role`.
     * Overriding this function changes the behavior of the {onlyRole} modifier.
     *
     * Format of the revert message is described in {_checkRole}.
     *
     * _Available since v4.6._
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Revert with a standard message if `account` is missing `role`.
     *
     * The format of the revert reason is given by the following regular expression:
     *
     *  /^AccessControl: account (0x[0-9a-f]{40}) is missing role (0x[0-9a-f]{64})$/
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert(
                string(
                    abi.encodePacked(
                        "AccessControl: account ",
                        Strings.toHexString(account),
                        " is missing role ",
                        Strings.toHexString(uint256(role), 32)
                    )
                )
            );
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual override returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual override onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address account) public virtual override {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * May emit a {RoleGranted} event.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     *
     * NOTE: This function is deprecated in favor of {_grantRole}.
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual {
        if (!hasRole(role, account)) {
            _roles[role].members[account] = true;
            emit RoleGranted(role, account, _msgSender());
        }
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual {
        if (hasRole(role, account)) {
            _roles[role].members[account] = false;
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/IAccessControlDefaultAdminRules.sol)

pragma solidity ^0.8.0;

import "./IAccessControl.sol";

/**
 * @dev External interface of AccessControlDefaultAdminRules declared to support ERC165 detection.
 *
 * _Available since v4.9._
 */
interface IAccessControlDefaultAdminRules is IAccessControl {
    /**
     * @dev Emitted when a {defaultAdmin} transfer is started, setting `newAdmin` as the next
     * address to become the {defaultAdmin} by calling {acceptDefaultAdminTransfer} only after `acceptSchedule`
     * passes.
     */
    event DefaultAdminTransferScheduled(address indexed newAdmin, uint48 acceptSchedule);

    /**
     * @dev Emitted when a {pendingDefaultAdmin} is reset if it was never accepted, regardless of its schedule.
     */
    event DefaultAdminTransferCanceled();

    /**
     * @dev Emitted when a {defaultAdminDelay} change is started, setting `newDelay` as the next
     * delay to be applied between default admin transfer after `effectSchedule` has passed.
     */
    event DefaultAdminDelayChangeScheduled(uint48 newDelay, uint48 effectSchedule);

    /**
     * @dev Emitted when a {pendingDefaultAdminDelay} is reset if its schedule didn't pass.
     */
    event DefaultAdminDelayChangeCanceled();

    /**
     * @dev Returns the address of the current `DEFAULT_ADMIN_ROLE` holder.
     */
    function defaultAdmin() external view returns (address);

    /**
     * @dev Returns a tuple of a `newAdmin` and an accept schedule.
     *
     * After the `schedule` passes, the `newAdmin` will be able to accept the {defaultAdmin} role
     * by calling {acceptDefaultAdminTransfer}, completing the role transfer.
     *
     * A zero value only in `acceptSchedule` indicates no pending admin transfer.
     *
     * NOTE: A zero address `newAdmin` means that {defaultAdmin} is being renounced.
     */
    function pendingDefaultAdmin() external view returns (address newAdmin, uint48 acceptSchedule);

    /**
     * @dev Returns the delay required to schedule the acceptance of a {defaultAdmin} transfer started.
     *
     * This delay will be added to the current timestamp when calling {beginDefaultAdminTransfer} to set
     * the acceptance schedule.
     *
     * NOTE: If a delay change has been scheduled, it will take effect as soon as the schedule passes, making this
     * function returns the new delay. See {changeDefaultAdminDelay}.
     */
    function defaultAdminDelay() external view returns (uint48);

    /**
     * @dev Returns a tuple of `newDelay` and an effect schedule.
     *
     * After the `schedule` passes, the `newDelay` will get into effect immediately for every
     * new {defaultAdmin} transfer started with {beginDefaultAdminTransfer}.
     *
     * A zero value only in `effectSchedule` indicates no pending delay change.
     *
     * NOTE: A zero value only for `newDelay` means that the next {defaultAdminDelay}
     * will be zero after the effect schedule.
     */
    function pendingDefaultAdminDelay() external view returns (uint48 newDelay, uint48 effectSchedule);

    /**
     * @dev Starts a {defaultAdmin} transfer by setting a {pendingDefaultAdmin} scheduled for acceptance
     * after the current timestamp plus a {defaultAdminDelay}.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * Emits a DefaultAdminRoleChangeStarted event.
     */
    function beginDefaultAdminTransfer(address newAdmin) external;

    /**
     * @dev Cancels a {defaultAdmin} transfer previously started with {beginDefaultAdminTransfer}.
     *
     * A {pendingDefaultAdmin} not yet accepted can also be cancelled with this function.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * May emit a DefaultAdminTransferCanceled event.
     */
    function cancelDefaultAdminTransfer() external;

    /**
     * @dev Completes a {defaultAdmin} transfer previously started with {beginDefaultAdminTransfer}.
     *
     * After calling the function:
     *
     * - `DEFAULT_ADMIN_ROLE` should be granted to the caller.
     * - `DEFAULT_ADMIN_ROLE` should be revoked from the previous holder.
     * - {pendingDefaultAdmin} should be reset to zero values.
     *
     * Requirements:
     *
     * - Only can be called by the {pendingDefaultAdmin}'s `newAdmin`.
     * - The {pendingDefaultAdmin}'s `acceptSchedule` should've passed.
     */
    function acceptDefaultAdminTransfer() external;

    /**
     * @dev Initiates a {defaultAdminDelay} update by setting a {pendingDefaultAdminDelay} scheduled for getting
     * into effect after the current timestamp plus a {defaultAdminDelay}.
     *
     * This function guarantees that any call to {beginDefaultAdminTransfer} done between the timestamp this
     * method is called and the {pendingDefaultAdminDelay} effect schedule will use the current {defaultAdminDelay}
     * set before calling.
     *
     * The {pendingDefaultAdminDelay}'s effect schedule is defined in a way that waiting until the schedule and then
     * calling {beginDefaultAdminTransfer} with the new delay will take at least the same as another {defaultAdmin}
     * complete transfer (including acceptance).
     *
     * The schedule is designed for two scenarios:
     *
     * - When the delay is changed for a larger one the schedule is `block.timestamp + newDelay` capped by
     * {defaultAdminDelayIncreaseWait}.
     * - When the delay is changed for a shorter one, the schedule is `block.timestamp + (current delay - new delay)`.
     *
     * A {pendingDefaultAdminDelay} that never got into effect will be canceled in favor of a new scheduled change.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * Emits a DefaultAdminDelayChangeScheduled event and may emit a DefaultAdminDelayChangeCanceled event.
     */
    function changeDefaultAdminDelay(uint48 newDelay) external;

    /**
     * @dev Cancels a scheduled {defaultAdminDelay} change.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * May emit a DefaultAdminDelayChangeCanceled event.
     */
    function rollbackDefaultAdminDelay() external;

    /**
     * @dev Maximum time in seconds for an increase to {defaultAdminDelay} (that is scheduled using {changeDefaultAdminDelay})
     * to take effect. Default to 5 days.
     *
     * When the {defaultAdminDelay} is scheduled to be increased, it goes into effect after the new delay has passed with
     * the purpose of giving enough time for reverting any accidental change (i.e. using milliseconds instead of seconds)
     * that may lock the contract. However, to avoid excessive schedules, the wait is capped by this function and it can
     * be overrode for a custom {defaultAdminDelay} increase scheduling.
     *
     * IMPORTANT: Make sure to add a reasonable amount of time while overriding this value, otherwise,
     * there's a risk of setting a high new delay that goes into effect almost immediately without the
     * possibility of human intervention in the case of an input error (eg. set milliseconds instead of seconds).
     */
    function defaultAdminDelayIncreaseWait() external view returns (uint48);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.0;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 *
 * Can be combined with {SafeMath} and {SignedSafeMath} to extend it to smaller types, by performing
 * all math on `uint256` and `int256` and then downcasting.
 */
library SafeCast {
    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        require(value <= type(uint248).max, "SafeCast: value doesn't fit in 248 bits");
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        require(value <= type(uint240).max, "SafeCast: value doesn't fit in 240 bits");
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        require(value <= type(uint232).max, "SafeCast: value doesn't fit in 232 bits");
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.2._
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        require(value <= type(uint224).max, "SafeCast: value doesn't fit in 224 bits");
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        require(value <= type(uint216).max, "SafeCast: value doesn't fit in 216 bits");
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        require(value <= type(uint208).max, "SafeCast: value doesn't fit in 208 bits");
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        require(value <= type(uint200).max, "SafeCast: value doesn't fit in 200 bits");
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        require(value <= type(uint192).max, "SafeCast: value doesn't fit in 192 bits");
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        require(value <= type(uint184).max, "SafeCast: value doesn't fit in 184 bits");
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        require(value <= type(uint176).max, "SafeCast: value doesn't fit in 176 bits");
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        require(value <= type(uint168).max, "SafeCast: value doesn't fit in 168 bits");
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        require(value <= type(uint160).max, "SafeCast: value doesn't fit in 160 bits");
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        require(value <= type(uint152).max, "SafeCast: value doesn't fit in 152 bits");
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        require(value <= type(uint144).max, "SafeCast: value doesn't fit in 144 bits");
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        require(value <= type(uint136).max, "SafeCast: value doesn't fit in 136 bits");
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v2.5._
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        require(value <= type(uint128).max, "SafeCast: value doesn't fit in 128 bits");
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        require(value <= type(uint120).max, "SafeCast: value doesn't fit in 120 bits");
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        require(value <= type(uint112).max, "SafeCast: value doesn't fit in 112 bits");
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        require(value <= type(uint104).max, "SafeCast: value doesn't fit in 104 bits");
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.2._
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        require(value <= type(uint96).max, "SafeCast: value doesn't fit in 96 bits");
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        require(value <= type(uint88).max, "SafeCast: value doesn't fit in 88 bits");
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        require(value <= type(uint80).max, "SafeCast: value doesn't fit in 80 bits");
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        require(value <= type(uint72).max, "SafeCast: value doesn't fit in 72 bits");
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v2.5._
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        require(value <= type(uint64).max, "SafeCast: value doesn't fit in 64 bits");
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        require(value <= type(uint56).max, "SafeCast: value doesn't fit in 56 bits");
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        require(value <= type(uint48).max, "SafeCast: value doesn't fit in 48 bits");
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        require(value <= type(uint40).max, "SafeCast: value doesn't fit in 40 bits");
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v2.5._
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        require(value <= type(uint32).max, "SafeCast: value doesn't fit in 32 bits");
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        require(value <= type(uint24).max, "SafeCast: value doesn't fit in 24 bits");
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v2.5._
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        require(value <= type(uint16).max, "SafeCast: value doesn't fit in 16 bits");
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v2.5._
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        require(value <= type(uint8).max, "SafeCast: value doesn't fit in 8 bits");
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     *
     * _Available since v3.0._
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        require(value >= 0, "SafeCast: value must be positive");
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     *
     * _Available since v4.7._
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 248 bits");
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     *
     * _Available since v4.7._
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 240 bits");
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     *
     * _Available since v4.7._
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 232 bits");
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     *
     * _Available since v4.7._
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 224 bits");
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     *
     * _Available since v4.7._
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 216 bits");
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     *
     * _Available since v4.7._
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 208 bits");
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     *
     * _Available since v4.7._
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 200 bits");
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     *
     * _Available since v4.7._
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 192 bits");
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     *
     * _Available since v4.7._
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 184 bits");
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     *
     * _Available since v4.7._
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 176 bits");
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     *
     * _Available since v4.7._
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 168 bits");
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     *
     * _Available since v4.7._
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 160 bits");
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     *
     * _Available since v4.7._
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 152 bits");
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     *
     * _Available since v4.7._
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 144 bits");
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     *
     * _Available since v4.7._
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 136 bits");
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     *
     * _Available since v3.1._
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 128 bits");
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     *
     * _Available since v4.7._
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 120 bits");
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     *
     * _Available since v4.7._
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 112 bits");
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     *
     * _Available since v4.7._
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 104 bits");
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     *
     * _Available since v4.7._
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 96 bits");
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     *
     * _Available since v4.7._
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 88 bits");
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     *
     * _Available since v4.7._
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 80 bits");
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     *
     * _Available since v4.7._
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 72 bits");
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     *
     * _Available since v3.1._
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 64 bits");
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     *
     * _Available since v4.7._
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 56 bits");
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     *
     * _Available since v4.7._
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 48 bits");
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     *
     * _Available since v4.7._
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 40 bits");
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     *
     * _Available since v3.1._
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 32 bits");
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     *
     * _Available since v4.7._
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 24 bits");
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     *
     * _Available since v3.1._
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 16 bits");
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     *
     * _Available since v3.1._
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        require(downcasted == value, "SafeCast: value doesn't fit in 8 bits");
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     *
     * _Available since v3.0._
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        require(value <= uint256(type(int256).max), "SafeCast: value doesn't fit in an int256");
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5313.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface for the Light Contract Ownership Standard.
 *
 * A standardized minimal interface required to identify an account that controls a contract
 *
 * _Available since v4.9._
 */
interface IERC5313 {
    /**
     * @dev Gets the address of the owner.
     */
    function owner() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (access/IAccessControl.sol)

pragma solidity ^0.8.0;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Strings.sol)

pragma solidity ^0.8.0;

import "./math/Math.sol";
import "./math/SignedMath.sol";

/**
 * @dev String operations.
 */
library Strings {
    bytes16 private constant _SYMBOLS = "0123456789abcdef";
    uint8 private constant _ADDRESS_LENGTH = 20;

    /**
     * @dev Converts a `uint256` to its ASCII `string` decimal representation.
     */
    function toString(uint256 value) internal pure returns (string memory) {
        unchecked {
            uint256 length = Math.log10(value) + 1;
            string memory buffer = new string(length);
            uint256 ptr;
            /// @solidity memory-safe-assembly
            assembly {
                ptr := add(buffer, add(32, length))
            }
            while (true) {
                ptr--;
                /// @solidity memory-safe-assembly
                assembly {
                    mstore8(ptr, byte(mod(value, 10), _SYMBOLS))
                }
                value /= 10;
                if (value == 0) break;
            }
            return buffer;
        }
    }

    /**
     * @dev Converts a `int256` to its ASCII `string` decimal representation.
     */
    function toString(int256 value) internal pure returns (string memory) {
        return string(abi.encodePacked(value < 0 ? "-" : "", toString(SignedMath.abs(value))));
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation.
     */
    function toHexString(uint256 value) internal pure returns (string memory) {
        unchecked {
            return toHexString(value, Math.log256(value) + 1);
        }
    }

    /**
     * @dev Converts a `uint256` to its ASCII `string` hexadecimal representation with fixed length.
     */
    function toHexString(uint256 value, uint256 length) internal pure returns (string memory) {
        bytes memory buffer = new bytes(2 * length + 2);
        buffer[0] = "0";
        buffer[1] = "x";
        for (uint256 i = 2 * length + 1; i > 1; --i) {
            buffer[i] = _SYMBOLS[value & 0xf];
            value >>= 4;
        }
        require(value == 0, "Strings: hex length insufficient");
        return string(buffer);
    }

    /**
     * @dev Converts an `address` with fixed length of 20 bytes to its not checksummed ASCII `string` hexadecimal representation.
     */
    function toHexString(address addr) internal pure returns (string memory) {
        return toHexString(uint256(uint160(addr)), _ADDRESS_LENGTH);
    }

    /**
     * @dev Returns true if the two strings are equal.
     */
    function equal(string memory a, string memory b) internal pure returns (bool) {
        return keccak256(bytes(a)) == keccak256(bytes(b));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/ERC165.sol)

pragma solidity ^0.8.0;

import "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 *
 * Alternatively, {ERC165Storage} provides an easier to use but more expensive implementation.
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/math/Math.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    enum Rounding {
        Down, // Toward negative infinity
        Up, // Toward infinity
        Zero // Toward zero
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds up instead
     * of rounding down.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv)
     * with further edits by Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod0 := mul(x, y)
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            require(denominator > prod1, "Math: mulDiv overflow");

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator. Always >= 1.
            // See https://cs.stackexchange.com/q/138556/92363.

            // Does not overflow because the denominator cannot be zero at this stage in the function.
            uint256 twos = denominator & (~denominator + 1);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also works
            // in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (rounding == Rounding.Up && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded down.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (rounding == Rounding.Up && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (rounding == Rounding.Up && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10, rounded down, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (rounding == Rounding.Up && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256, rounded down, of a positive value.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (rounding == Rounding.Up && 1 << (result << 3) < value ? 1 : 0);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.8.0) (utils/math/SignedMath.sol)

pragma solidity ^0.8.0;

/**
 * @dev Standard signed math utilities missing in the Solidity language.
 */
library SignedMath {
    /**
     * @dev Returns the largest of two signed numbers.
     */
    function max(int256 a, int256 b) internal pure returns (int256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two signed numbers.
     */
    function min(int256 a, int256 b) internal pure returns (int256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two signed numbers without overflow.
     * The result is rounded towards zero.
     */
    function average(int256 a, int256 b) internal pure returns (int256) {
        // Formula from the book "Hacker's Delight"
        int256 x = (a & b) + ((a ^ b) >> 1);
        return x + (int256(uint256(x) >> 255) & (a ^ b));
    }

    /**
     * @dev Returns the absolute unsigned value of a signed value.
     */
    function abs(int256 n) internal pure returns (uint256) {
        unchecked {
            // must be unchecked in order to support `n = type(int256).min`
            return uint256(n >= 0 ? n : -n);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

{
  "remappings": [
    "@uniswap/v3-periphery/=lib/v3-periphery/",
    "@uniswap/v3-core/=lib/v3-core/",
    "@uniswap/swap-router-contracts/=lib/swap-router-contracts/",
    "@openzeppelin/contracts/=lib/openzeppelin-contracts/contracts/",
    "@openzeppelin/contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "@layerzerolabs/solidity-examples/=lib/solidity-examples/",
    "@layerzerolabs/lz-evm-messagelib-v2/=lib/LayerZero-v2/packages/layerzero-v2/evm/messagelib/",
    "@layerzerolabs/lz-evm-oapp-v2/=lib/LayerZero-v2/packages/layerzero-v2/evm/oapp/",
    "@layerzerolabs/lz-evm-protocol-v2/=lib/LayerZero-v2/packages/layerzero-v2/evm/protocol/",
    "@layerzerolabs/lz-evm-v1-0.7/=node_modules/@layerzerolabs/lz-evm-v1-0.7/",
    "solidity-bytes-utils/=lib/solidity-bytes-utils/",
    "hardhat-deploy/=node_modules/hardhat-deploy/",
    "@hyperlane-xyz/=node_modules/@hyperlane-xyz/core/",
    "LayerZero-v2/=lib/LayerZero-v2/",
    "ds-test/=lib/openzeppelin-contracts-upgradeable/lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "halmos-cheatcodes/=lib/openzeppelin-contracts/lib/halmos-cheatcodes/src/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "openzeppelin/=lib/openzeppelin-contracts-upgradeable/contracts/",
    "solidity-examples/=lib/solidity-examples/contracts/",
    "swap-router-contracts/=lib/swap-router-contracts/contracts/",
    "v3-core/=lib/v3-core/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"name":"InvalidRecipient","type":"error"},{"inputs":[],"name":"InvalidUtb","type":"error"},{"inputs":[],"name":"RouterNotSet","type":"error"},{"inputs":[],"name":"SwapFailed","type":"error"},{"inputs":[],"name":"WithdrawalFailed","type":"error"},{"anonymous":false,"inputs":[],"name":"DefaultAdminDelayChangeCanceled","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint48","name":"newDelay","type":"uint48"},{"indexed":false,"internalType":"uint48","name":"effectSchedule","type":"uint48"}],"name":"DefaultAdminDelayChangeScheduled","type":"event"},{"anonymous":false,"inputs":[],"name":"DefaultAdminTransferCanceled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newAdmin","type":"address"},{"indexed":false,"internalType":"uint48","name":"acceptSchedule","type":"uint48"}],"name":"DefaultAdminTransferScheduled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"utb","type":"address"}],"name":"SetUtb","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"WithdrawERC20","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ID","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"acceptDefaultAdminTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newAdmin","type":"address"}],"name":"beginDefaultAdminTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"cancelDefaultAdminTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint48","name":"newDelay","type":"uint48"}],"name":"changeDefaultAdminDelay","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"defaultAdmin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"defaultAdminDelay","outputs":[{"internalType":"uint48","name":"","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"defaultAdminDelayIncreaseWait","outputs":[{"internalType":"uint48","name":"","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingDefaultAdmin","outputs":[{"internalType":"address","name":"newAdmin","type":"address"},{"internalType":"uint48","name":"schedule","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingDefaultAdminDelay","outputs":[{"internalType":"uint48","name":"newDelay","type":"uint48"},{"internalType":"uint48","name":"schedule","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rollbackDefaultAdminDelay","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_router","type":"address"}],"name":"setRouter","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_utb","type":"address"}],"name":"setUtb","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address payable","name":"_wrapped","type":"address"}],"name":"setWrapped","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint256","name":"amountIn","type":"uint256"},{"internalType":"uint256","name":"amountOut","type":"uint256"},{"internalType":"uint256","name":"dustOut","type":"uint256"},{"internalType":"address","name":"tokenIn","type":"address"},{"internalType":"address","name":"tokenOut","type":"address"},{"internalType":"uint8","name":"direction","type":"uint8"},{"internalType":"address","name":"refund","type":"address"},{"internalType":"bytes","name":"additionalArgs","type":"bytes"}],"internalType":"struct SwapParams","name":"swapParams","type":"tuple"}],"name":"swap","outputs":[{"internalType":"address","name":"tokenOut","type":"address"},{"internalType":"uint256","name":"amountOut","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"uniswap_router","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"utb","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"token","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdrawERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"wrapped","outputs":[{"internalType":"address payable","name":"","type":"address"}],"stateMutability":"view","type":"function"}]

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