Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

import "./PythDependency/IPyth.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
import "./External/SafeMath.sol";
import "./OErc20.sol";
import "./External/FullMath.sol";
import "./PriceOracle.sol";

contract PythOracleProxy is Ownable, PriceOracle {
    using SafeMath for uint32;
    using SafeMath for uint;

    error OraclePriceLessThanZero();

    IPyth public pyth;
    mapping(address => bytes32) public addressToPriceFeedID;
    uint private priceInvalidAfterSeconds = 3600;

    constructor() Ownable(msg.sender) {}

    function setPythOracle(IPyth _pyth) external onlyOwner {
        pyth = _pyth;
    }

    function setPriceFeedIds(
        address[] calldata underlyingAssets,
        bytes32[] calldata priceFeedIds
    ) external onlyOwner {
        require(
            underlyingAssets.length == priceFeedIds.length,
            "PythOracleProxy: assets and priceFeedIds length mismatch"
        );
        for (uint i = 0; i < underlyingAssets.length; i++) {
            addressToPriceFeedID[underlyingAssets[i]] = priceFeedIds[i];
        }
    }

    function getUnderlyingPrice(
        OToken oToken
    ) public view override returns (uint) {
        address asset = _getUnderlyingAddress(oToken);
        // Get the price from Pyth
        PythStructs.Price memory price = pyth.getPriceNoOlderThan(
            addressToPriceFeedID[asset],
            priceInvalidAfterSeconds
        );
        if (price.price < 0) {
            revert OraclePriceLessThanZero();
        }
        // Converts price to a format as defined by the Comptroller
        uint32 expToUse = uint32(36 + price.expo);
        // get underlying decimals
        uint underlyingDecimals = asset == 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE ? 18 : OErc20(asset).decimals();
        return FullMath.mulDiv(
            10 ** expToUse,
            uint256(int256(price.price)),
            10 ** underlyingDecimals
        );
    }

    function _getUnderlyingAddress(
        OToken oToken
    ) private view returns (address) {
        address asset;
        if (compareStrings(oToken.symbol(), "oETH")) {
            asset = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
        } else {
            asset = address(OErc20(address(oToken)).underlying());
        }
        return asset;
    }

    function _setPriceInvalidAfterSec(uint val) external onlyOwner {
        priceInvalidAfterSeconds = val;
    }

    function compareStrings(
        string memory a,
        string memory b
    ) internal pure returns (bool) {
        return (keccak256(abi.encodePacked((a))) ==
            keccak256(abi.encodePacked((b))));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/Ownable.sol)

pragma solidity ^0.8.20;

import {Context} from "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * The initial owner is set to the address provided by the deployer. This can
 * later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    /**
     * @dev The caller account is not authorized to perform an operation.
     */
    error OwnableUnauthorizedAccount(address account);

    /**
     * @dev The owner is not a valid owner account. (eg. `address(0)`)
     */
    error OwnableInvalidOwner(address owner);

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the address provided by the deployer as the initial owner.
     */
    constructor(address initialOwner) {
        if (initialOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(initialOwner);
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        if (owner() != _msgSender()) {
            revert OwnableUnauthorizedAccount(_msgSender());
        }
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        if (newOwner == address(0)) {
            revert OwnableInvalidOwner(address(0));
        }
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

abstract contract ComptrollerInterface {
    /// @notice Indicator that this is a Comptroller contract (for inspection)
    bool public constant isComptroller = true;

    /*** Assets You Are In ***/

    function enterMarkets(address[] calldata cTokens) virtual external returns (uint[] memory);
    function exitMarket(address cToken) virtual external returns (uint);

    /*** Policy Hooks ***/

    function mintAllowed(address cToken, address minter, uint mintAmount) virtual external returns (uint);
    function mintVerify(address cToken, address minter, uint mintAmount, uint mintTokens) virtual external;

    function redeemAllowed(address cToken, address redeemer, uint redeemTokens) virtual external returns (uint);
    function redeemVerify(address cToken, address redeemer, uint redeemAmount, uint redeemTokens) virtual external;

    function borrowAllowed(address cToken, address borrower, uint borrowAmount) virtual external returns (uint);
    function borrowVerify(address cToken, address borrower, uint borrowAmount) virtual external;

    function repayBorrowAllowed(
        address cToken,
        address payer,
        address borrower,
        uint repayAmount) virtual external returns (uint);
    function repayBorrowVerify(
        address cToken,
        address payer,
        address borrower,
        uint repayAmount,
        uint borrowerIndex) virtual external;

    function liquidateBorrowAllowed(
        address cTokenBorrowed,
        address cTokenCollateral,
        address liquidator,
        address borrower,
        uint repayAmount) virtual external returns (uint);
    function liquidateBorrowVerify(
        address cTokenBorrowed,
        address cTokenCollateral,
        address liquidator,
        address borrower,
        uint repayAmount,
        uint seizeTokens) virtual external;

    function seizeAllowed(
        address cTokenCollateral,
        address cTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) virtual external returns (uint);
    function seizeVerify(
        address cTokenCollateral,
        address cTokenBorrowed,
        address liquidator,
        address borrower,
        uint seizeTokens) virtual external;

    function transferAllowed(address cToken, address src, address dst, uint transferTokens) virtual external returns (uint);
    function transferVerify(address cToken, address src, address dst, uint transferTokens) virtual external;

    /*** Liquidity/Liquidation Calculations ***/

    function liquidateCalculateSeizeTokens(
        address cTokenBorrowed,
        address cTokenCollateral,
        uint repayAmount) virtual external view returns (uint, uint);
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

import "./ComptrollerInterface.sol";
import "../InterestRate/InterestRateModel.sol";
import "../External/EIP20NonStandardInterface.sol";
import "../ErrorReporter.sol";

contract CTokenStorage {
    /**
     * @dev Guard variable for re-entrancy checks
     */
    bool internal _notEntered;

    /**
     * @notice EIP-20 token name for this token
     */
    string public name;

    /**
     * @notice EIP-20 token symbol for this token
     */
    string public symbol;

    /**
     * @notice EIP-20 token decimals for this token
     */
    uint8 public decimals;

    // Maximum borrow rate that can ever be applied (.0005% / block)
    uint internal constant borrowRateMaxMantissa = 0.0005e16;

    // Maximum fraction of interest that can be set aside for reserves
    uint internal constant reserveFactorMaxMantissa = 1e18;

    /**
     * @notice Administrator for this contract
     */
    address payable public admin;

    /**
     * @notice Pending administrator for this contract
     */
    address payable public pendingAdmin;

    /**
     * @notice Contract which oversees inter-cToken operations
     */
    ComptrollerInterface public comptroller;

    /**
     * @notice Model which tells what the current interest rate should be
     */
    InterestRateModel public interestRateModel;

    // Initial exchange rate used when minting the first CTokens (used when totalSupply = 0)
    uint internal initialExchangeRateMantissa;

    /**
     * @notice Fraction of interest currently set aside for reserves
     */
    uint public reserveFactorMantissa;

    /**
     * @notice Block number that interest was last accrued at
     */
    uint public accrualBlockNumber;

    /**
     * @notice Accumulator of the total earned interest rate since the opening of the market
     */
    uint public borrowIndex;

    /**
     * @notice Total amount of outstanding borrows of the underlying in this market
     */
    uint public totalBorrows;

    /**
     * @notice Total amount of reserves of the underlying held in this market
     */
    uint public totalReserves;

    /**
     * @notice Total number of tokens in circulation
     */
    uint public totalSupply;

    // Official record of token balances for each account
    mapping (address => uint) internal accountTokens;

    // Approved token transfer amounts on behalf of others
    mapping (address => mapping (address => uint)) internal transferAllowances;

    /**
     * @notice Container for borrow balance information
     * @member principal Total balance (with accrued interest), after applying the most recent balance-changing action
     * @member interestIndex Global borrowIndex as of the most recent balance-changing action
     */
    struct BorrowSnapshot {
        uint principal;
        uint interestIndex;
    }

    // Mapping of account addresses to outstanding borrow balances
    mapping(address => BorrowSnapshot) internal accountBorrows;

    /**
     * @notice Share of seized collateral that is added to reserves
     */
    uint public constant protocolSeizeShareMantissa = 2.8e16; //2.8%
}

abstract contract CTokenInterface is CTokenStorage {
    /**
     * @notice Indicator that this is a CToken contract (for inspection)
     */
    bool public constant isCToken = true;


    /*** Market Events ***/

    /**
     * @notice Event emitted when interest is accrued
     */
    event AccrueInterest(uint cashPrior, uint interestAccumulated, uint borrowIndex, uint totalBorrows);

    /**
     * @notice Event emitted when tokens are minted
     */
    event Mint(address minter, uint mintAmount, uint mintTokens);

    /**
     * @notice Event emitted when tokens are redeemed
     */
    event Redeem(address redeemer, uint redeemAmount, uint redeemTokens);

    /**
     * @notice Event emitted when underlying is borrowed
     */
    event Borrow(address borrower, uint borrowAmount, uint accountBorrows, uint totalBorrows);

    /**
     * @notice Event emitted when a borrow is repaid
     */
    event RepayBorrow(address payer, address borrower, uint repayAmount, uint accountBorrows, uint totalBorrows);

    /**
     * @notice Event emitted when a borrow is liquidated
     */
    event LiquidateBorrow(address liquidator, address borrower, uint repayAmount, address cTokenCollateral, uint seizeTokens);


    /*** Admin Events ***/

    /**
     * @notice Event emitted when pendingAdmin is changed
     */
    event NewPendingAdmin(address oldPendingAdmin, address newPendingAdmin);

    /**
     * @notice Event emitted when pendingAdmin is accepted, which means admin is updated
     */
    event NewAdmin(address oldAdmin, address newAdmin);

    /**
     * @notice Event emitted when comptroller is changed
     */
    event NewComptroller(ComptrollerInterface oldComptroller, ComptrollerInterface newComptroller);

    /**
     * @notice Event emitted when interestRateModel is changed
     */
    event NewMarketInterestRateModel(InterestRateModel oldInterestRateModel, InterestRateModel newInterestRateModel);

    /**
     * @notice Event emitted when the reserve factor is changed
     */
    event NewReserveFactor(uint oldReserveFactorMantissa, uint newReserveFactorMantissa);

    /**
     * @notice Event emitted when the reserves are added
     */
    event ReservesAdded(address benefactor, uint addAmount, uint newTotalReserves);

    /**
     * @notice Event emitted when the reserves are reduced
     */
    event ReservesReduced(address admin, uint reduceAmount, uint newTotalReserves);

    /**
     * @notice EIP20 Transfer event
     */
    event Transfer(address indexed from, address indexed to, uint amount);

    /**
     * @notice EIP20 Approval event
     */
    event Approval(address indexed owner, address indexed spender, uint amount);


    /*** User Interface ***/

    function transfer(address dst, uint amount) virtual external returns (bool);
    function transferFrom(address src, address dst, uint amount) virtual external returns (bool);
    function approve(address spender, uint amount) virtual external returns (bool);
    function allowance(address owner, address spender) virtual external view returns (uint);
    function balanceOf(address owner) virtual external view returns (uint);
    function balanceOfUnderlying(address owner) virtual external returns (uint);
    function getAccountSnapshot(address account) virtual external view returns (uint, uint, uint, uint);
    function borrowRatePerBlock() virtual external view returns (uint);
    function supplyRatePerBlock() virtual external view returns (uint);
    function totalBorrowsCurrent() virtual external returns (uint);
    function borrowBalanceCurrent(address account) virtual external returns (uint);
    function borrowBalanceStored(address account) virtual external view returns (uint);
    function exchangeRateCurrent() virtual external returns (uint);
    function exchangeRateStored() virtual external view returns (uint);
    function getCash() virtual external view returns (uint);
    function accrueInterest() virtual external returns (uint);
    function seize(address liquidator, address borrower, uint seizeTokens) virtual external returns (uint);


    /*** Admin Functions ***/

    function _setPendingAdmin(address payable newPendingAdmin) virtual external returns (uint);
    function _acceptAdmin() virtual external returns (uint);
    function _setComptroller(ComptrollerInterface newComptroller) virtual external returns (uint);
    function _setReserveFactor(uint newReserveFactorMantissa) virtual external returns (uint);
    function _reduceReserves(uint reduceAmount) virtual external returns (uint);
    function _setInterestRateModel(InterestRateModel newInterestRateModel) virtual external returns (uint);
}

contract CErc20Storage {
    /**
     * @notice Underlying asset for this CToken
     */
    address public underlying;
}

abstract contract CErc20Interface is CErc20Storage {

    /*** User Interface ***/

    function mint(uint mintAmount) virtual external returns (uint);
    function redeem(uint redeemTokens) virtual external returns (uint);
    function redeemUnderlying(uint redeemAmount) virtual external returns (uint);
    function borrow(uint borrowAmount) virtual external returns (uint);
    function repayBorrow(uint repayAmount) virtual external returns (uint);
    function repayBorrowBehalf(address borrower, uint repayAmount) virtual external returns (uint);
    function liquidateBorrow(address borrower, uint repayAmount, CTokenInterface cTokenCollateral) virtual external returns (uint);
    function sweepToken(EIP20NonStandardInterface token) virtual external;


    /*** Admin Functions ***/

    function _addReserves(uint addAmount) virtual external returns (uint);
}

contract CDelegationStorage {
    /**
     * @notice Implementation address for this contract
     */
    address public implementation;
}

abstract contract CDelegatorInterface is CDelegationStorage {
    /**
     * @notice Emitted when implementation is changed
     */
    event NewImplementation(address oldImplementation, address newImplementation);

    /**
     * @notice Called by the admin to update the implementation of the delegator
     * @param implementation_ The address of the new implementation for delegation
     * @param allowResign Flag to indicate whether to call _resignImplementation on the old implementation
     * @param becomeImplementationData The encoded bytes data to be passed to _becomeImplementation
     */
    function _setImplementation(address implementation_, bool allowResign, bytes memory becomeImplementationData) virtual external;
}

abstract contract CDelegateInterface is CDelegationStorage {
    /**
     * @notice Called by the delegator on a delegate to initialize it for duty
     * @dev Should revert if any issues arise which make it unfit for delegation
     * @param data The encoded bytes data for any initialization
     */
    function _becomeImplementation(bytes memory data) virtual external;

    /**
     * @notice Called by the delegator on a delegate to forfeit its responsibility
     */
    function _resignImplementation() virtual external;
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

contract ComptrollerErrorReporter {
    enum Error {
        NO_ERROR,
        UNAUTHORIZED,
        COMPTROLLER_MISMATCH,
        INSUFFICIENT_SHORTFALL,
        INSUFFICIENT_LIQUIDITY,
        INVALID_CLOSE_FACTOR,
        INVALID_COLLATERAL_FACTOR,
        INVALID_LIQUIDATION_INCENTIVE,
        MARKET_NOT_ENTERED, // No longer possible
        MARKET_NOT_LISTED,
        MARKET_ALREADY_LISTED,
        MATH_ERROR,
        NONZERO_BORROW_BALANCE,
        PRICE_ERROR,
        REJECTION,
        SNAPSHOT_ERROR,
        TOO_MANY_ASSETS,
        TOO_MUCH_REPAY
    }

    enum FailureInfo {
        ACCEPT_ADMIN_PENDING_ADMIN_CHECK,
        ACCEPT_PENDING_IMPLEMENTATION_ADDRESS_CHECK,
        EXIT_MARKET_BALANCE_OWED,
        EXIT_MARKET_REJECTION,
        SET_CLOSE_FACTOR_OWNER_CHECK,
        SET_CLOSE_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_OWNER_CHECK,
        SET_COLLATERAL_FACTOR_NO_EXISTS,
        SET_COLLATERAL_FACTOR_VALIDATION,
        SET_COLLATERAL_FACTOR_WITHOUT_PRICE,
        SET_IMPLEMENTATION_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_OWNER_CHECK,
        SET_LIQUIDATION_INCENTIVE_VALIDATION,
        SET_MAX_ASSETS_OWNER_CHECK,
        SET_PENDING_ADMIN_OWNER_CHECK,
        SET_PENDING_IMPLEMENTATION_OWNER_CHECK,
        SET_PRICE_ORACLE_OWNER_CHECK,
        SUPPORT_MARKET_EXISTS,
        SUPPORT_MARKET_OWNER_CHECK,
        SET_PAUSE_GUARDIAN_OWNER_CHECK
    }

    /**
     * @dev `error` corresponds to enum Error; `info` corresponds to enum FailureInfo, and `detail` is an arbitrary
     * contract-specific code that enables us to report opaque error codes from upgradeable contracts.
     **/
    event Failure(uint error, uint info, uint detail);

    /**
     * @dev use this when reporting a known error from the money market or a non-upgradeable collaborator
     */
    function fail(Error err, FailureInfo info) internal returns (uint) {
        emit Failure(uint(err), uint(info), 0);

        return uint(err);
    }

    /**
     * @dev use this when reporting an opaque error from an upgradeable collaborator contract
     */
    function failOpaque(
        Error err,
        FailureInfo info,
        uint opaqueError
    ) internal returns (uint) {
        emit Failure(uint(err), uint(info), opaqueError);

        return uint(err);
    }
}

contract TokenErrorReporter {
    uint public constant NO_ERROR = 0; // support legacy return codes

    error TransferComptrollerRejection(uint256 errorCode);
    error TransferNotAllowed();
    error TransferNotEnough();
    error TransferTooMuch();

    error MintComptrollerRejection(uint256 errorCode);
    error MintFreshnessCheck();

    error RedeemComptrollerRejection(uint256 errorCode);
    error RedeemFreshnessCheck();
    error RedeemTransferOutNotPossible();

    error BorrowComptrollerRejection(uint256 errorCode);
    error BorrowFreshnessCheck();
    error BorrowCashNotAvailable();

    error RepayBorrowComptrollerRejection(uint256 errorCode);
    error RepayBorrowFreshnessCheck();

    error LiquidateComptrollerRejection(uint256 errorCode);
    error LiquidateFreshnessCheck();
    error LiquidateCollateralFreshnessCheck();
    error LiquidateAccrueBorrowInterestFailed(uint256 errorCode);
    error LiquidateAccrueCollateralInterestFailed(uint256 errorCode);
    error LiquidateLiquidatorIsBorrower();
    error LiquidateCloseAmountIsZero();
    error LiquidateCloseAmountIsUintMax();
    error LiquidateRepayBorrowFreshFailed(uint256 errorCode);

    error LiquidateSeizeComptrollerRejection(uint256 errorCode);
    error LiquidateSeizeLiquidatorIsBorrower();

    error AcceptAdminPendingAdminCheck();

    error SetComptrollerOwnerCheck();
    error SetPendingAdminOwnerCheck();

    error SetReserveFactorAdminCheck();
    error SetReserveFactorFreshCheck();
    error SetReserveFactorBoundsCheck();

    error AddReservesFactorFreshCheck(uint256 actualAddAmount);

    error ReduceReservesAdminCheck();
    error ReduceReservesFreshCheck();
    error ReduceReservesCashNotAvailable();
    error ReduceReservesCashValidation();

    error SetInterestRateModelOwnerCheck();
    error SetInterestRateModelFreshCheck();

    error BlastYieldOwnerCheck();
    error BlastTransferFailed();
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

/**
 * @title ERC 20 Token Standard Interface
 *  https://eips.ethereum.org/EIPS/eip-20
 */
interface EIP20Interface {
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);

    /**
      * @notice Get the total number of tokens in circulation
      * @return The supply of tokens
      */
    function totalSupply() external view returns (uint256);

    /**
     * @notice Gets the balance of the specified address
     * @param owner The address from which the balance will be retrieved
     * @return balance The balance
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
      * @notice Transfer `amount` tokens from `msg.sender` to `dst`
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      * @return success Whether or not the transfer succeeded
      */
    function transfer(address dst, uint256 amount) external returns (bool success);

    /**
      * @notice Transfer `amount` tokens from `src` to `dst`
      * @param src The address of the source account
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      * @return success Whether or not the transfer succeeded
      */
    function transferFrom(address src, address dst, uint256 amount) external returns (bool success);

    /**
      * @notice Approve `spender` to transfer up to `amount` from `src`
      * @dev This will overwrite the approval amount for `spender`
      *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
      * @param spender The address of the account which may transfer tokens
      * @param amount The number of tokens that are approved (-1 means infinite)
      * @return success Whether or not the approval succeeded
      */
    function approve(address spender, uint256 amount) external returns (bool success);

    /**
      * @notice Get the current allowance from `owner` for `spender`
      * @param owner The address of the account which owns the tokens to be spent
      * @param spender The address of the account which may transfer tokens
      * @return remaining The number of tokens allowed to be spent (-1 means infinite)
      */
    function allowance(address owner, address spender) external view returns (uint256 remaining);

    event Transfer(address indexed from, address indexed to, uint256 amount);
    event Approval(address indexed owner, address indexed spender, uint256 amount);
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

/**
 * @title EIP20NonStandardInterface
 * @dev Version of ERC20 with no return values for `transfer` and `transferFrom`
 *  See https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
 */
interface EIP20NonStandardInterface {

    /**
     * @notice Get the total number of tokens in circulation
     * @return The supply of tokens
     */
    function totalSupply() external view returns (uint256);

    /**
     * @notice Gets the balance of the specified address
     * @param owner The address from which the balance will be retrieved
     * @return balance The balance
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    ///
    /// !!!!!!!!!!!!!!
    /// !!! NOTICE !!! `transfer` does not return a value, in violation of the ERC-20 specification
    /// !!!!!!!!!!!!!!
    ///

    /**
      * @notice Transfer `amount` tokens from `msg.sender` to `dst`
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      */
    function transfer(address dst, uint256 amount) external;

    ///
    /// !!!!!!!!!!!!!!
    /// !!! NOTICE !!! `transferFrom` does not return a value, in violation of the ERC-20 specification
    /// !!!!!!!!!!!!!!
    ///

    /**
      * @notice Transfer `amount` tokens from `src` to `dst`
      * @param src The address of the source account
      * @param dst The address of the destination account
      * @param amount The number of tokens to transfer
      */
    function transferFrom(address src, address dst, uint256 amount) external;

    /**
      * @notice Approve `spender` to transfer up to `amount` from `src`
      * @dev This will overwrite the approval amount for `spender`
      *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
      * @param spender The address of the account which may transfer tokens
      * @param amount The number of tokens that are approved
      * @return success Whether or not the approval succeeded
      */
    function approve(address spender, uint256 amount) external returns (bool success);

    /**
      * @notice Get the current allowance from `owner` for `spender`
      * @param owner The address of the account which owns the tokens to be spent
      * @param spender The address of the account which may transfer tokens
      * @return remaining The number of tokens allowed to be spent
      */
    function allowance(address owner, address spender) external view returns (uint256 remaining);

    event Transfer(address indexed from, address indexed to, uint256 amount);
    event Approval(address indexed owner, address indexed spender, uint256 amount);
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

/**
 * @title Exponential module for storing fixed-precision decimals
 * @author Orbit
 * @notice Exp is a struct which stores decimals with a fixed precision of 18 decimal places.
 *         Thus, if we wanted to store the 5.1, mantissa would store 5.1e18. That is:
 *         `Exp({mantissa: 5100000000000000000})`.
 */
contract ExponentialNoError {
    uint constant expScale = 1e18;
    uint constant doubleScale = 1e36;
    uint constant halfExpScale = expScale/2;
    uint constant mantissaOne = expScale;

    struct Exp {
        uint mantissa;
    }

    struct Double {
        uint mantissa;
    }

    /**
     * @dev Truncates the given exp to a whole number value.
     *      For example, truncate(Exp{mantissa: 15 * expScale}) = 15
     */
    function truncate(Exp memory exp) pure internal returns (uint) {
        // Note: We are not using careful math here as we're performing a division that cannot fail
        return exp.mantissa / expScale;
    }

    /**
     * @dev Multiply an Exp by a scalar, then truncate to return an unsigned integer.
     */
    function mul_ScalarTruncate(Exp memory a, uint scalar) pure internal returns (uint) {
        Exp memory product = mul_(a, scalar);
        return truncate(product);
    }

    /**
     * @dev Multiply an Exp by a scalar, truncate, then add an to an unsigned integer, returning an unsigned integer.
     */
    function mul_ScalarTruncateAddUInt(Exp memory a, uint scalar, uint addend) pure internal returns (uint) {
        Exp memory product = mul_(a, scalar);
        return add_(truncate(product), addend);
    }

    /**
     * @dev Checks if first Exp is less than second Exp.
     */
    function lessThanExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa < right.mantissa;
    }

    /**
     * @dev Checks if left Exp <= right Exp.
     */
    function lessThanOrEqualExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa <= right.mantissa;
    }

    /**
     * @dev Checks if left Exp > right Exp.
     */
    function greaterThanExp(Exp memory left, Exp memory right) pure internal returns (bool) {
        return left.mantissa > right.mantissa;
    }

    /**
     * @dev returns true if Exp is exactly zero
     */
    function isZeroExp(Exp memory value) pure internal returns (bool) {
        return value.mantissa == 0;
    }

    function safe224(uint n, string memory errorMessage) pure internal returns (uint224) {
        require(n < 2**224, errorMessage);
        return uint224(n);
    }

    function safe32(uint n, string memory errorMessage) pure internal returns (uint32) {
        require(n < 2**32, errorMessage);
        return uint32(n);
    }

    function add_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: add_(a.mantissa, b.mantissa)});
    }

    function add_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: add_(a.mantissa, b.mantissa)});
    }

    function add_(uint a, uint b) pure internal returns (uint) {
        return a + b;
    }

    function sub_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: sub_(a.mantissa, b.mantissa)});
    }

    function sub_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: sub_(a.mantissa, b.mantissa)});
    }

    function sub_(uint a, uint b) pure internal returns (uint) {
        return a - b;
    }

    function mul_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: mul_(a.mantissa, b.mantissa) / expScale});
    }

    function mul_(Exp memory a, uint b) pure internal returns (Exp memory) {
        return Exp({mantissa: mul_(a.mantissa, b)});
    }

    function mul_(uint a, Exp memory b) pure internal returns (uint) {
        return mul_(a, b.mantissa) / expScale;
    }

    function mul_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: mul_(a.mantissa, b.mantissa) / doubleScale});
    }

    function mul_(Double memory a, uint b) pure internal returns (Double memory) {
        return Double({mantissa: mul_(a.mantissa, b)});
    }

    function mul_(uint a, Double memory b) pure internal returns (uint) {
        return mul_(a, b.mantissa) / doubleScale;
    }

    function mul_(uint a, uint b) pure internal returns (uint) {
        return a * b;
    }

    function div_(Exp memory a, Exp memory b) pure internal returns (Exp memory) {
        return Exp({mantissa: div_(mul_(a.mantissa, expScale), b.mantissa)});
    }

    function div_(Exp memory a, uint b) pure internal returns (Exp memory) {
        return Exp({mantissa: div_(a.mantissa, b)});
    }

    function div_(uint a, Exp memory b) pure internal returns (uint) {
        return div_(mul_(a, expScale), b.mantissa);
    }

    function div_(Double memory a, Double memory b) pure internal returns (Double memory) {
        return Double({mantissa: div_(mul_(a.mantissa, doubleScale), b.mantissa)});
    }

    function div_(Double memory a, uint b) pure internal returns (Double memory) {
        return Double({mantissa: div_(a.mantissa, b)});
    }

    function div_(uint a, Double memory b) pure internal returns (uint) {
        return div_(mul_(a, doubleScale), b.mantissa);
    }

    function div_(uint a, uint b) pure internal returns (uint) {
        return a / b;
    }

    function fraction(uint a, uint b) pure internal returns (Double memory) {
        return Double({mantissa: div_(mul_(a, doubleScale), b)});
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.10;

/// @title Contains 512-bit math functions
/// @notice Facilitates multiplication and division that can have overflow of an intermediate value without any loss of precision
/// @dev Handles "phantom overflow" i.e., allows multiplication and division where an intermediate value overflows 256 bits
library FullMath {
    /// @notice Calculates floor(a×b÷denominator) with full precision. Throws if result overflows a uint256 or denominator == 0
    /// @param a The multiplicand
    /// @param b The multiplier
    /// @param denominator The divisor
    /// @return result The 256-bit result
    /// @dev Credit to Remco Bloemen under MIT license https://xn--2-umb.com/21/muldiv
    function mulDiv(
        uint256 a,
        uint256 b,
        uint256 denominator
    ) internal pure returns (uint256 result) {
        // 512-bit multiply [prod1 prod0] = a * b
        // Compute the product mod 2**256 and mod 2**256 - 1
        // then use the Chinese Remainder Theorem to reconstruct
        // the 512 bit result. The result is stored in two 256
        // variables such that product = prod1 * 2**256 + prod0
        uint256 prod0; // Least significant 256 bits of the product
        uint256 prod1; // Most significant 256 bits of the product
        assembly {
            let mm := mulmod(a, b, not(0))
            prod0 := mul(a, b)
            prod1 := sub(sub(mm, prod0), lt(mm, prod0))
        }

        // Handle non-overflow cases, 256 by 256 division
        if (prod1 == 0) {
            require(denominator > 0);
            assembly {
                result := div(prod0, denominator)
            }
            return result;
        }

        // Make sure the result is less than 2**256.
        // Also prevents denominator == 0
        require(denominator > prod1);

        ///////////////////////////////////////////////
        // 512 by 256 division.
        ///////////////////////////////////////////////

        // Make division exact by subtracting the remainder from [prod1 prod0]
        // Compute remainder using mulmod
        uint256 remainder;
        assembly {
            remainder := mulmod(a, b, denominator)
        }
        // Subtract 256 bit number from 512 bit number
        assembly {
            prod1 := sub(prod1, gt(remainder, prod0))
            prod0 := sub(prod0, remainder)
        }

        // Factor powers of two out of denominator
        // Compute largest power of two divisor of denominator.
        // Always >= 1.
        uint256 twos = denominator & (~denominator + 1);
        // Divide denominator by power of two
        assembly {
            denominator := div(denominator, twos)
        }

        // Divide [prod1 prod0] by the factors of two
        assembly {
            prod0 := div(prod0, twos)
        }
        // Shift in bits from prod1 into prod0. For this we need
        // to flip `twos` such that it is 2**256 / twos.
        // If twos is zero, then it becomes one
        assembly {
            twos := add(div(sub(0, twos), twos), 1)
        }
        prod0 |= prod1 * twos;

        // Invert denominator mod 2**256
        // Now that denominator is an odd number, it has an inverse
        // modulo 2**256 such that denominator * inv = 1 mod 2**256.
        // Compute the inverse by starting with a seed that is correct
        // correct for four bits. That is, denominator * inv = 1 mod 2**4
        uint256 inv = (3 * denominator) ^ 2;
        // Now use Newton-Raphson iteration to improve the precision.
        // Thanks to Hensel's lifting lemma, this also works in modular
        // arithmetic, doubling the correct bits in each step.
        inv *= 2 - denominator * inv; // inverse mod 2**8
        inv *= 2 - denominator * inv; // inverse mod 2**16
        inv *= 2 - denominator * inv; // inverse mod 2**32
        inv *= 2 - denominator * inv; // inverse mod 2**64
        inv *= 2 - denominator * inv; // inverse mod 2**128
        inv *= 2 - denominator * inv; // inverse mod 2**256

        // Because the division is now exact we can divide by multiplying
        // with the modular inverse of denominator. This will give us the
        // correct result modulo 2**256. Since the precoditions guarantee
        // that the outcome is less than 2**256, this is the final result.
        // We don't need to compute the high bits of the result and prod1
        // is no longer required.
        result = prod0 * inv;
        return result;
    }
}

import "@openzeppelin/contracts/interfaces/IERC20.sol";

enum YieldMode {
    AUTOMATIC,
    VOID,
    CLAIMABLE
}

enum GasMode {
    VOID,
    CLAIMABLE
}

interface IBlast {
    // configure
    function configureContract(
        address contractAddress,
        YieldMode _yield,
        GasMode gasMode,
        address governor
    ) external;
    function configure(
        YieldMode _yield,
        GasMode gasMode,
        address governor
    ) external;

    // base configuration options
    function configureClaimableYield() external;
    function configureClaimableYieldOnBehalf(address contractAddress) external;
    function configureAutomaticYield() external;
    function configureAutomaticYieldOnBehalf(address contractAddress) external;
    function configureVoidYield() external;
    function configureVoidYieldOnBehalf(address contractAddress) external;
    function configureClaimableGas() external;
    function configureClaimableGasOnBehalf(address contractAddress) external;
    function configureVoidGas() external;
    function configureVoidGasOnBehalf(address contractAddress) external;
    function configureGovernor(address _governor) external;
    function configureGovernorOnBehalf(
        address _newGovernor,
        address contractAddress
    ) external;

    // claim yield
    function claimYield(
        address contractAddress,
        address recipientOfYield,
        uint256 amount
    ) external returns (uint256);
    function claimAllYield(
        address contractAddress,
        address recipientOfYield
    ) external returns (uint256);

    // claim gas
    function claimAllGas(
        address contractAddress,
        address recipientOfGas
    ) external returns (uint256);
    function claimGasAtMinClaimRate(
        address contractAddress,
        address recipientOfGas,
        uint256 minClaimRateBips
    ) external returns (uint256);
    function claimMaxGas(
        address contractAddress,
        address recipientOfGas
    ) external returns (uint256);
    function claimGas(
        address contractAddress,
        address recipientOfGas,
        uint256 gasToClaim,
        uint256 gasSecondsToConsume
    ) external returns (uint256);

    // read functions
    function readClaimableYield(
        address contractAddress
    ) external view returns (uint256);
    function readYieldConfiguration(
        address contractAddress
    ) external view returns (uint8);
    function readGasParams(
        address contractAddress
    )
        external
        view
        returns (
            uint256 etherSeconds,
            uint256 etherBalance,
            uint256 lastUpdated,
            GasMode
        );
}

interface IERC20Rebasing is IERC20 {
    // changes the yield mode of the caller and update the balance
    // to reflect the configuration
    function configure(YieldMode) external returns (uint256);
    function getConfiguration(
        address account
    ) external view returns (YieldMode);
    // "claimable" yield mode accounts can call this this claim their yield
    // to another address
    function claim(
        address recipient,
        uint256 amount
    ) external returns (uint256);
    // read the claimable amount for an account
    function getClaimableAmount(
        address account
    ) external view returns (uint256);
}

interface IBlastPoints {
    function configurePointsOperator(address operator) external;
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c;
        unchecked {
            c = a + b;
        }
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        uint256 c;
        unchecked {
            c = a + b;
        }
        require(c >= a, errorMessage);

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot underflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction underflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot underflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c;
        unchecked {
            c = a * b;
        }
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c;
        unchecked {
            c = a * b;
        }
        require(c / a == b, errorMessage);

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers.
     * Reverts on division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers.
     * Reverts with custom message on division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

/**
 * @title Interest Rate Model Interface
 * @author Orbit
 */
abstract contract InterestRateModel {
    /// @notice Indicator that this is an InterestRateModel contract (for inspection)
    bool public constant isInterestRateModel = true;

    /**
     * @notice Calculates the current borrow interest rate per block
     * @param cash The total amount of cash the market has
     * @param borrows The total amount of borrows the market has outstanding
     * @param reserves The total amount of reserves the market has
     * @return The borrow rate per block (as a percentage, and scaled by 1e18)
     */
    function getBorrowRate(
        uint cash,
        uint borrows,
        uint reserves
    ) external view virtual returns (uint);

    /**
     * @notice Calculates the current supply interest rate per block
     * @param cash The total amount of cash the market has
     * @param borrows The total amount of borrows the market has outstanding
     * @param reserves The total amount of reserves the market has
     * @param reserveFactorMantissa The current reserve factor the market has
     * @return The supply rate per block (as a percentage, and scaled by 1e18)
     */
    function getSupplyRate(
        uint cash,
        uint borrows,
        uint reserves,
        uint reserveFactorMantissa
    ) external view virtual returns (uint);
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

import "./OToken.sol";

interface CompLike {
    function delegate(address delegatee) external;
}

/**
 * @title A market for supplying assets to, and borrowing assets from Orbit
 * @notice Wraps around an ERC20 underlying asset
 * @author Orbit
 */
contract OErc20 is OToken, CErc20Interface {

    /**
     * @notice Initialize the new money market
     * @param underlying_ The address of the underlying asset
     * @param spaceStation_ The address of the Comptroller
     * @param interestRateModel_ The address of the interest rate model
     * @param initialExchangeRateMantissa_ The initial exchange rate, scaled by 1e18
     * @param name_ ERC-20 name of this token
     * @param symbol_ ERC-20 symbol of this token
     * @param decimals_ ERC-20 decimal precision of this token
     */
    function initialize(
        address underlying_,
        ComptrollerInterface spaceStation_,
        InterestRateModel interestRateModel_,
        uint initialExchangeRateMantissa_,
        string memory name_,
        string memory symbol_,
        uint8 decimals_
    ) public {
        // CToken initialize does the bulk of the work
        super.initialize(
            spaceStation_,
            interestRateModel_,
            initialExchangeRateMantissa_,
            name_,
            symbol_,
            decimals_
        );

        // Set underlying and sanity check it
        underlying = underlying_;
        EIP20Interface(underlying).totalSupply();
    }

    /*** User Interface ***/

    /**
     * @notice Sender supplies assets into the market and receives cTokens in exchange
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param mintAmount The amount of the underlying asset to supply
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function mint(uint mintAmount) external override returns (uint) {
        mintInternal(mintAmount);
        return NO_ERROR;
    }

    /**
     * @notice Sender redeems cTokens in exchange for the underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemTokens The number of cTokens to redeem into underlying
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeem(uint redeemTokens) external override returns (uint) {
        redeemInternal(redeemTokens);
        return NO_ERROR;
    }

    /**
     * @notice Sender redeems cTokens in exchange for a specified amount of underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemAmount The amount of underlying to redeem
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemUnderlying(
        uint redeemAmount
    ) external override returns (uint) {
        redeemUnderlyingInternal(redeemAmount);
        return NO_ERROR;
    }

    /**
     * @notice Sender borrows assets from the protocol to their own address
     * @param borrowAmount The amount of the underlying asset to borrow
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function borrow(uint borrowAmount) external override returns (uint) {
        borrowInternal(borrowAmount);
        return NO_ERROR;
    }

    /**
     * @notice Sender repays their own borrow
     * @param repayAmount The amount to repay, or -1 for the full outstanding amount
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function repayBorrow(uint repayAmount) external override returns (uint) {
        repayBorrowInternal(repayAmount);
        return NO_ERROR;
    }

    /**
     * @notice Sender repays a borrow belonging to borrower
     * @param borrower the account with the debt being payed off
     * @param repayAmount The amount to repay, or -1 for the full outstanding amount
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function repayBorrowBehalf(
        address borrower,
        uint repayAmount
    ) external override returns (uint) {
        repayBorrowBehalfInternal(borrower, repayAmount);
        return NO_ERROR;
    }

    /**
     * @notice The sender liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this cToken to be liquidated
     * @param repayAmount The amount of the underlying borrowed asset to repay
     * @param cTokenCollateral The market in which to seize collateral from the borrower
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function liquidateBorrow(
        address borrower,
        uint repayAmount,
        CTokenInterface cTokenCollateral
    ) external override returns (uint) {
        liquidateBorrowInternal(borrower, repayAmount, cTokenCollateral);
        return NO_ERROR;
    }

    /**
     * @notice A public function to sweep accidental ERC-20 transfers to this contract. Tokens are sent to admin (timelock)
     * @param token The address of the ERC-20 token to sweep
     */
    function sweepToken(EIP20NonStandardInterface token) external override {
        require(
            msg.sender == admin,
            "CErc20::sweepToken: only admin can sweep tokens"
        );
        require(
            address(token) != underlying,
            "CErc20::sweepToken: can not sweep underlying token"
        );
        uint256 balance = token.balanceOf(address(this));
        token.transfer(admin, balance);
    }

    /**
     * @notice The sender adds to reserves.
     * @param addAmount The amount fo underlying token to add as reserves
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _addReserves(uint addAmount) external override returns (uint) {
        return _addReservesInternal(addAmount);
    }

    /*** Safe Token ***/

    /**
     * @notice Gets balance of this contract in terms of the underlying
     * @dev This excludes the value of the current message, if any
     * @return The quantity of underlying tokens owned by this contract
     */
    function getCashPrior() internal view virtual override returns (uint) {
        EIP20Interface token = EIP20Interface(underlying);
        return token.balanceOf(address(this));
    }

    /**
     * @dev Similar to EIP20 transfer, except it handles a False result from `transferFrom` and reverts in that case.
     *      This will revert due to insufficient balance or insufficient allowance.
     *      This function returns the actual amount received,
     *      which may be less than `amount` if there is a fee attached to the transfer.
     *
     *      Note: This wrapper safely handles non-standard ERC-20 tokens that do not return a value.
     *            See here: https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
     */
    function doTransferIn(
        address from,
        uint amount
    ) internal virtual override returns (uint) {
        // Read from storage once
        address underlying_ = underlying;
        EIP20NonStandardInterface token = EIP20NonStandardInterface(
            underlying_
        );
        uint balanceBefore = EIP20Interface(underlying_).balanceOf(
            address(this)
        );
        token.transferFrom(from, address(this), amount);

        bool success;
        assembly {
            switch returndatasize()
            case 0 {
                // This is a non-standard ERC-20
                success := not(0) // set success to true
            }
            case 32 {
                // This is a compliant ERC-20
                returndatacopy(0, 0, 32)
                success := mload(0) // Set `success = returndata` of override external call
            }
            default {
                // This is an excessively non-compliant ERC-20, revert.
                revert(0, 0)
            }
        }
        require(success, "TOKEN_TRANSFER_IN_FAILED");

        // Calculate the amount that was *actually* transferred
        uint balanceAfter = EIP20Interface(underlying_).balanceOf(
            address(this)
        );
        return balanceAfter - balanceBefore; // underflow already checked above, just subtract
    }

    /**
     * @dev Similar to EIP20 transfer, except it handles a False success from `transfer` and returns an explanatory
     *      error code rather than reverting. If caller has not called checked protocol's balance, this may revert due to
     *      insufficient cash held in this contract. If caller has checked protocol's balance prior to this call, and verified
     *      it is >= amount, this should not revert in normal conditions.
     *
     *      Note: This wrapper safely handles non-standard ERC-20 tokens that do not return a value.
     *            See here: https://medium.com/coinmonks/missing-return-value-bug-at-least-130-tokens-affected-d67bf08521ca
     */
    function doTransferOut(
        address payable to,
        uint amount
    ) internal virtual override {
        EIP20NonStandardInterface token = EIP20NonStandardInterface(underlying);
        token.transfer(to, amount);

        bool success;
        assembly {
            switch returndatasize()
            case 0 {
                // This is a non-standard ERC-20
                success := not(0) // set success to true
            }
            case 32 {
                // This is a compliant ERC-20
                returndatacopy(0, 0, 32)
                success := mload(0) // Set `success = returndata` of override external call
            }
            default {
                // This is an excessively non-compliant ERC-20, revert.
                revert(0, 0)
            }
        }
        require(success, "TOKEN_TRANSFER_OUT_FAILED");
    }

    /**
     * @notice Admin call to delegate the votes of the COMP-like underlying
     * @param compLikeDelegatee The address to delegate votes to
     * @dev CTokens whose underlying are not CompLike should revert here
     */
    function _delegateCompLikeTo(address compLikeDelegatee) external {
        require(
            msg.sender == admin,
            "only the admin may set the comp-like delegate"
        );
        CompLike(underlying).delegate(compLikeDelegatee);
    }
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

import "./ErrorReporter.sol";
import "./Core/ComptrollerInterface.sol";
import "./Core/CTokenInterfaces.sol";
import "./InterestRate/InterestRateModel.sol";
import "./External/EIP20Interface.sol";
import "./External/ExponentialNoError.sol";
import "./External/IBlast.sol";

// Dev
// import "hardhat/console.sol";

/**
 * @title Orbit's OToken Contract
 * @notice Abstract base for OTokens
 * @author Orbit
 */
abstract contract OToken is
    CTokenInterface,
    ExponentialNoError,
    TokenErrorReporter
{

    event Message(string message);

    // Mainnet Values
    IERC20Rebasing public constant USDBBlast =
        IERC20Rebasing(0x4300000000000000000000000000000000000003);
    IERC20Rebasing public constant WETHBlast =
        IERC20Rebasing(0x4300000000000000000000000000000000000004);
    IBlast public constant BlastContract =
        IBlast(0x4300000000000000000000000000000000000002);
    
    /**
     * @notice Initialize the money market
     * @param spaceStation_ The address of the Space Station Comptroller
     * @param interestRateModel_ The address of the interest rate model
     * @param initialExchangeRateMantissa_ The initial exchange rate, scaled by 1e18
     * @param name_ EIP-20 name of this token
     * @param symbol_ EIP-20 symbol of this token
     * @param decimals_ EIP-20 decimal precision of this token
     */
    function initialize(
        ComptrollerInterface spaceStation_,
        InterestRateModel interestRateModel_,
        uint initialExchangeRateMantissa_,
        string memory name_,
        string memory symbol_,
        uint8 decimals_
    ) public {
        require(msg.sender == admin, "only admin may initialize the market");
        require(
            accrualBlockNumber == 0 && borrowIndex == 0,
            "market may only be initialized once"
        );
        // Set initial exchange rate
        initialExchangeRateMantissa = initialExchangeRateMantissa_;
        require(
            initialExchangeRateMantissa > 0,
            "initial exchange rate must be greater than zero."
        );
        // Set the comptroller
        uint err = _setComptroller(spaceStation_);
        require(err == NO_ERROR, "setting comptroller failed");

        // Initialize block number and borrow index (block number mocks depend on comptroller being set)
        accrualBlockNumber = getBlockNumber();
        borrowIndex = mantissaOne;

        // Set the interest rate model (depends on block number / borrow index)
        err = _setInterestRateModelFresh(interestRateModel_);
        require(err == NO_ERROR, "setting interest rate model failed");

        name = name_;
        symbol = symbol_;
        decimals = decimals_;

        // The counter starts true to prevent changing it from zero to non-zero (i.e. smaller cost/refund)
        _notEntered = true;
    }

    /**
     * @notice Transfer `tokens` tokens from `src` to `dst` by `spender`
     * @dev Called by both `transfer` and `transferFrom` internally
     * @param spender The address of the account performing the transfer
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param tokens The number of tokens to transfer
     * @return 0 if the transfer succeeded, else revert
     */
    function transferTokens(
        address spender,
        address src,
        address dst,
        uint tokens
    ) internal returns (uint) {
        /* Fail if transfer not allowed */
        uint allowed = comptroller.transferAllowed(
            address(this),
            src,
            dst,
            tokens
        );
        if (allowed != 0) {
            revert TransferComptrollerRejection(allowed);
        }

        /* Do not allow self-transfers */
        if (src == dst) {
            revert TransferNotAllowed();
        }

        /* Get the allowance, infinite for the account owner */
        uint startingAllowance = 0;
        if (spender == src) {
            startingAllowance = type(uint).max;
        } else {
            startingAllowance = transferAllowances[src][spender];
        }

        /* Do the calculations, checking for {under,over}flow */
        uint allowanceNew = startingAllowance - tokens;
        uint srcTokensNew = accountTokens[src] - tokens;
        uint dstTokensNew = accountTokens[dst] + tokens;

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        accountTokens[src] = srcTokensNew;
        accountTokens[dst] = dstTokensNew;

        /* Eat some of the allowance (if necessary) */
        if (startingAllowance != type(uint).max) {
            transferAllowances[src][spender] = allowanceNew;
        }

        /* We emit a Transfer event */
        emit Transfer(src, dst, tokens);

        // unused function
        // comptroller.transferVerify(address(this), src, dst, tokens);

        return NO_ERROR;
    }

    /**
     * @notice Transfer `amount` tokens from `msg.sender` to `dst`
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transfer(
        address dst,
        uint256 amount
    ) external override nonReentrant returns (bool) {
        return transferTokens(msg.sender, msg.sender, dst, amount) == NO_ERROR;
    }

    /**
     * @notice Transfer `amount` tokens from `src` to `dst`
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transferFrom(
        address src,
        address dst,
        uint256 amount
    ) external override nonReentrant returns (bool) {
        return transferTokens(msg.sender, src, dst, amount) == NO_ERROR;
    }

    /**
     * @notice Approve `spender` to transfer up to `amount` from `src`
     * @dev This will overwrite the approval amount for `spender`
     *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
     * @param spender The address of the account which may transfer tokens
     * @param amount The number of tokens that are approved (uint256.max means infinite)
     * @return Whether or not the approval succeeded
     */
    function approve(
        address spender,
        uint256 amount
    ) external override returns (bool) {
        address src = msg.sender;
        transferAllowances[src][spender] = amount;
        emit Approval(src, spender, amount);
        return true;
    }

    /**
     * @notice Get the current allowance from `owner` for `spender`
     * @param owner The address of the account which owns the tokens to be spent
     * @param spender The address of the account which may transfer tokens
     * @return The number of tokens allowed to be spent (-1 means infinite)
     */
    function allowance(
        address owner,
        address spender
    ) external view override returns (uint256) {
        return transferAllowances[owner][spender];
    }

    /**
     * @notice Get the token balance of the `owner`
     * @param owner The address of the account to query
     * @return The number of tokens owned by `owner`
     */
    function balanceOf(address owner) external view override returns (uint256) {
        return accountTokens[owner];
    }

    /**
     * @notice Get the underlying balance of the `owner`
     * @dev This also accrues interest in a transaction
     * @param owner The address of the account to query
     * @return The amount of underlying owned by `owner`
     */
    function balanceOfUnderlying(
        address owner
    ) external override returns (uint) {
        Exp memory exchangeRate = Exp({mantissa: exchangeRateCurrent()});
        return mul_ScalarTruncate(exchangeRate, accountTokens[owner]);
    }

    /**
     * @notice Get a snapshot of the account's balances, and the cached exchange rate
     * @dev This is used by comptroller to more efficiently perform liquidity checks.
     * @param account Address of the account to snapshot
     * @return (possible error, token balance, borrow balance, exchange rate mantissa)
     */
    function getAccountSnapshot(
        address account
    ) external view override returns (uint, uint, uint, uint) {
        return (
            NO_ERROR,
            accountTokens[account],
            borrowBalanceStoredInternal(account),
            exchangeRateStoredInternal()
        );
    }

    /**
     * @dev Function to simply retrieve block number
     *  This exists mainly for inheriting test contracts to stub this result.
     */
    function getBlockNumber() internal view virtual returns (uint) {
        return block.number;
    }

    /**
     * @notice Returns the current per-block borrow interest rate for this oToken
     * @return The borrow interest rate per block, scaled by 1e18
     */
    function borrowRatePerBlock() external view override returns (uint) {
        return
            interestRateModel.getBorrowRate(
                getCashPrior(),
                totalBorrows,
                totalReserves
            );
    }

    /**
     * @notice Returns the current per-block supply interest rate for this oToken
     * @return The supply interest rate per block, scaled by 1e18
     */
    function supplyRatePerBlock() external view override returns (uint) {
        return
            interestRateModel.getSupplyRate(
                getCashPrior(),
                totalBorrows,
                totalReserves,
                reserveFactorMantissa
            );
    }

    /**
     * @notice Returns the current total borrows plus accrued interest
     * @return The total borrows with interest
     */
    function totalBorrowsCurrent()
        external
        override
        nonReentrant
        returns (uint)
    {
        accrueInterest();
        return totalBorrows;
    }

    /**
     * @notice Accrue interest to updated borrowIndex and then calculate account's borrow balance using the updated borrowIndex
     * @param account The address whose balance should be calculated after updating borrowIndex
     * @return The calculated balance
     */
    function borrowBalanceCurrent(
        address account
    ) external override nonReentrant returns (uint) {
        accrueInterest();
        return borrowBalanceStored(account);
    }

    /**
     * @notice Return the borrow balance of account based on stored data
     * @param account The address whose balance should be calculated
     * @return The calculated balance
     */
    function borrowBalanceStored(
        address account
    ) public view override returns (uint) {
        return borrowBalanceStoredInternal(account);
    }

    /**
     * @notice Return the borrow balance of account based on stored data
     * @param account The address whose balance should be calculated
     * @return (error code, the calculated balance or 0 if error code is non-zero)
     */
    function borrowBalanceStoredInternal(
        address account
    ) internal view returns (uint) {
        /* Get borrowBalance and borrowIndex */
        BorrowSnapshot storage borrowSnapshot = accountBorrows[account];

        /* If borrowBalance = 0 then borrowIndex is likely also 0.
         * Rather than failing the calculation with a division by 0, we immediately return 0 in this case.
         */
        if (borrowSnapshot.principal == 0) {
            return 0;
        }

        /* Calculate new borrow balance using the interest index:
         *  recentBorrowBalance = borrower.borrowBalance * market.borrowIndex / borrower.borrowIndex
         */
        uint principalTimesIndex = borrowSnapshot.principal * borrowIndex;
        return principalTimesIndex / borrowSnapshot.interestIndex;
    }

    /**
     * @notice Accrue interest then return the up-to-date exchange rate
     * @return Calculated exchange rate scaled by 1e18
     */
    function exchangeRateCurrent() public override nonReentrant returns (uint) {
        accrueInterest();
        return exchangeRateStored();
    }

    /**
     * @notice Calculates the exchange rate from the underlying to the oToken
     * @dev This function does not accrue interest before calculating the exchange rate
     * @return Calculated exchange rate scaled by 1e18
     */
    function exchangeRateStored() public view override returns (uint) {
        return exchangeRateStoredInternal();
    }

    /**
     * @notice Calculates the exchange rate from the underlying to the oToken
     * @dev This function does not accrue interest before calculating the exchange rate
     * @return calculated exchange rate scaled by 1e18
     */
    function exchangeRateStoredInternal() internal view virtual returns (uint) {
        uint _totalSupply = totalSupply;
        if (_totalSupply == 0) {
            /*
             * If there are no tokens minted:
             *  exchangeRate = initialExchangeRate
             */
            return initialExchangeRateMantissa;
        } else {
            /*
             * Otherwise:
             *  exchangeRate = (totalCash + totalBorrows - totalReserves) / totalSupply
             */
            uint totalCash = getCashPrior();
            uint cashPlusBorrowsMinusReserves = totalCash +
                totalBorrows -
                totalReserves;
            uint exchangeRate = (cashPlusBorrowsMinusReserves * expScale) /
                _totalSupply;

            return exchangeRate;
        }
    }

    /**
     * @notice Get cash balance of this oToken in the underlying asset
     * @return The quantity of underlying asset owned by this contract
     */
    function getCash() external view override returns (uint) {
        return getCashPrior();
    }

    /**
     * @notice Applies accrued interest to total borrows and reserves
     * @dev This calculates interest accrued from the last checkpointed block
     *   up to the current block and writes new checkpoint to storage.
     */
    function accrueInterest() public virtual override returns (uint) {
        /* Remember the initial block number */
        uint currentBlockNumber = getBlockNumber();
        uint accrualBlockNumberPrior = accrualBlockNumber;

        /* Short-circuit accumulating 0 interest */
        if (accrualBlockNumberPrior == currentBlockNumber) {
            return NO_ERROR;
        }

        /* Read the previous values out of storage */
        uint cashPrior = getCashPrior();
        uint borrowsPrior = totalBorrows;
        uint reservesPrior = totalReserves;
        uint borrowIndexPrior = borrowIndex;

        /* Calculate the current borrow interest rate */
        uint borrowRateMantissa = interestRateModel.getBorrowRate(
            cashPrior,
            borrowsPrior,
            reservesPrior
        );
        require(
            borrowRateMantissa <= borrowRateMaxMantissa,
            "borrow rate is absurdly high"
        );

        /* Calculate the number of blocks elapsed since the last accrual */
        uint blockDelta = currentBlockNumber - accrualBlockNumberPrior;

        /*
         * Calculate the interest accumulated into borrows and reserves and the new index:
         *  simpleInterestFactor = borrowRate * blockDelta
         *  interestAccumulated = simpleInterestFactor * totalBorrows
         *  totalBorrowsNew = interestAccumulated + totalBorrows
         *  totalReservesNew = interestAccumulated * reserveFactor + totalReserves
         *  borrowIndexNew = simpleInterestFactor * borrowIndex + borrowIndex
         */

        Exp memory simpleInterestFactor = mul_(
            Exp({mantissa: borrowRateMantissa}),
            blockDelta
        );
        uint interestAccumulated = mul_ScalarTruncate(
            simpleInterestFactor,
            borrowsPrior
        );
        uint totalBorrowsNew = interestAccumulated + borrowsPrior;
        uint totalReservesNew = mul_ScalarTruncateAddUInt(
            Exp({mantissa: reserveFactorMantissa}),
            interestAccumulated,
            reservesPrior
        );
        uint borrowIndexNew = mul_ScalarTruncateAddUInt(
            simpleInterestFactor,
            borrowIndexPrior,
            borrowIndexPrior
        );

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We write the previously calculated values into storage */
        accrualBlockNumber = currentBlockNumber;
        borrowIndex = borrowIndexNew;
        totalBorrows = totalBorrowsNew;
        totalReserves = totalReservesNew;

        /* We emit an AccrueInterest event */
        emit AccrueInterest(
            cashPrior,
            interestAccumulated,
            borrowIndexNew,
            totalBorrowsNew
        );

        return NO_ERROR;
    }

    /**
     * @notice Sender supplies assets into the market and receives oTokens in exchange
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param mintAmount The amount of the underlying asset to supply
     */
    function mintInternal(uint mintAmount) internal nonReentrant {
        accrueInterest();
        // mintFresh emits the actual Mint event if successful and logs on errors, so we don't need to
        mintFresh(msg.sender, mintAmount);
    }

    /**
     * @notice User supplies assets into the market and receives oTokens in exchange
     * @dev Assumes interest has already been accrued up to the current block
     * @param minter The address of the account which is supplying the assets
     * @param mintAmount The amount of the underlying asset to supply
     */
    function mintFresh(address minter, uint mintAmount) internal {
        /* Fail if mint not allowed */
        uint allowed = comptroller.mintAllowed(
            address(this),
            minter,
            mintAmount
        );
        if (allowed != 0) {
            revert MintComptrollerRejection(allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            revert MintFreshnessCheck();
        }

        Exp memory exchangeRate = Exp({mantissa: exchangeRateStoredInternal()});

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         *  We call `doTransferIn` for the minter and the mintAmount.
         *  Note: The oToken must handle variations between ERC-20 and ETH underlying.
         *  `doTransferIn` reverts if anything goes wrong, since we can't be sure if
         *  side-effects occurred. The function returns the amount actually transferred,
         *  in case of a fee. On success, the oToken holds an additional `actualMintAmount`
         *  of cash.
         */
        uint actualMintAmount = doTransferIn(minter, mintAmount);

        /*
         * We get the current exchange rate and calculate the number of oTokens to be minted:
         *  mintTokens = actualMintAmount / exchangeRate
         */

        uint mintTokens = div_(actualMintAmount, exchangeRate);

        /*
         * We calculate the new total supply of oTokens and minter token balance, checking for overflow:
         *  totalSupplyNew = totalSupply + mintTokens
         *  accountTokensNew = accountTokens[minter] + mintTokens
         * And write them into storage
         */
        totalSupply = totalSupply + mintTokens;
        accountTokens[minter] = accountTokens[minter] + mintTokens;

        /* We emit a Mint event, and a Transfer event */
        emit Mint(minter, actualMintAmount, mintTokens);
        emit Transfer(address(this), minter, mintTokens);

        /* We call the defense hook */
        // unused function
        // comptroller.mintVerify(address(this), minter, actualMintAmount, mintTokens);
    }

    /**
     * @notice Sender redeems oTokens in exchange for the underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemTokens The number of oTokens to redeem into underlying
     */
    function redeemInternal(uint redeemTokens) internal nonReentrant {
        accrueInterest();
        // redeemFresh emits redeem-specific logs on errors, so we don't need to
        redeemFresh(payable(msg.sender), redeemTokens, 0);
    }

    /**
     * @notice Sender redeems oTokens in exchange for a specified amount of underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemAmount The amount of underlying to receive from redeeming oTokens
     */
    function redeemUnderlyingInternal(uint redeemAmount) internal nonReentrant {
        accrueInterest();
        // redeemFresh emits redeem-specific logs on errors, so we don't need to
        redeemFresh(payable(msg.sender), 0, redeemAmount);
    }

    /**
     * @notice User redeems oTokens in exchange for the underlying asset
     * @dev Assumes interest has already been accrued up to the current block
     * @param redeemer The address of the account which is redeeming the tokens
     * @param redeemTokensIn The number of oTokens to redeem into underlying (only one of redeemTokensIn or redeemAmountIn may be non-zero)
     * @param redeemAmountIn The number of underlying tokens to receive from redeeming oTokens (only one of redeemTokensIn or redeemAmountIn may be non-zero)
     */
    function redeemFresh(
        address payable redeemer,
        uint redeemTokensIn,
        uint redeemAmountIn
    ) internal {
        require(
            redeemTokensIn == 0 || redeemAmountIn == 0,
            "one of redeemTokensIn or redeemAmountIn must be zero"
        );

        /* exchangeRate = invoke Exchange Rate Stored() */
        Exp memory exchangeRate = Exp({mantissa: exchangeRateStoredInternal()});

        uint redeemTokens;
        uint redeemAmount;
        /* If redeemTokensIn > 0: */
        if (redeemTokensIn > 0) {
            /*
             * We calculate the exchange rate and the amount of underlying to be redeemed:
             *  redeemTokens = redeemTokensIn
             *  redeemAmount = redeemTokensIn x exchangeRateCurrent
             */
            redeemTokens = redeemTokensIn;
            redeemAmount = mul_ScalarTruncate(exchangeRate, redeemTokensIn);
        } else {
            /*
             * We get the current exchange rate and calculate the amount to be redeemed:
             *  redeemTokens = redeemAmountIn / exchangeRate
             *  redeemAmount = redeemAmountIn
             */
            redeemTokens = div_(redeemAmountIn, exchangeRate);
            redeemAmount = redeemAmountIn;
        }

        /* Fail if redeem not allowed */
        uint allowed = comptroller.redeemAllowed(
            address(this),
            redeemer,
            redeemTokens
        );
        if (allowed != 0) {
            revert RedeemComptrollerRejection(allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            revert RedeemFreshnessCheck();
        }

        /* Fail gracefully if protocol has insufficient cash */
        if (getCashPrior() < redeemAmount) {
            revert RedeemTransferOutNotPossible();
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We write the previously calculated values into storage.
         *  Note: Avoid token reentrancy attacks by writing reduced supply before external transfer.
         */
        totalSupply = totalSupply - redeemTokens;
        accountTokens[redeemer] = accountTokens[redeemer] - redeemTokens;

        /*
         * We invoke doTransferOut for the redeemer and the redeemAmount.
         *  Note: The oToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the oToken has redeemAmount less of cash.
         *  doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
         */
        doTransferOut(redeemer, redeemAmount);

        /* We emit a Transfer event, and a Redeem event */
        emit Transfer(redeemer, address(this), redeemTokens);
        emit Redeem(redeemer, redeemAmount, redeemTokens);

        /* We call the defense hook */
        comptroller.redeemVerify(
            address(this),
            redeemer,
            redeemAmount,
            redeemTokens
        );
    }

    /**
     * @notice Sender borrows assets from the protocol to their own address
     * @param borrowAmount The amount of the underlying asset to borrow
     */
    function borrowInternal(uint borrowAmount) internal nonReentrant {
        accrueInterest();
        // borrowFresh emits borrow-specific logs on errors, so we don't need to
        borrowFresh(payable(msg.sender), borrowAmount);
    }

    /**
     * @notice Users borrow assets from the protocol to their own address
     * @param borrowAmount The amount of the underlying asset to borrow
     */
    function borrowFresh(address payable borrower, uint borrowAmount) internal {
        /* Fail if borrow not allowed */
        uint allowed = comptroller.borrowAllowed(
            address(this),
            borrower,
            borrowAmount
        );
        if (allowed != 0) {
            revert BorrowComptrollerRejection(allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            revert BorrowFreshnessCheck();
        }

        /* Fail gracefully if protocol has insufficient underlying cash */
        if (getCashPrior() < borrowAmount) {
            revert BorrowCashNotAvailable();
        }

        /*
         * We calculate the new borrower and total borrow balances, failing on overflow:
         *  accountBorrowNew = accountBorrow + borrowAmount
         *  totalBorrowsNew = totalBorrows + borrowAmount
         */
        uint accountBorrowsPrev = borrowBalanceStoredInternal(borrower);
        uint accountBorrowsNew = accountBorrowsPrev + borrowAmount;
        uint totalBorrowsNew = totalBorrows + borrowAmount;

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We write the previously calculated values into storage.
         *  Note: Avoid token reentrancy attacks by writing increased borrow before external transfer.
        `*/
        accountBorrows[borrower].principal = accountBorrowsNew;
        accountBorrows[borrower].interestIndex = borrowIndex;
        totalBorrows = totalBorrowsNew;

        /*
         * We invoke doTransferOut for the borrower and the borrowAmount.
         *  Note: The oToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the oToken borrowAmount less of cash.
         *  doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
         */
        doTransferOut(borrower, borrowAmount);

        /* We emit a Borrow event */
        emit Borrow(borrower, borrowAmount, accountBorrowsNew, totalBorrowsNew);
    }

    /**
     * @notice Sender repays their own borrow
     * @param repayAmount The amount to repay, or -1 for the full outstanding amount
     */
    function repayBorrowInternal(uint repayAmount) internal nonReentrant {
        accrueInterest();
        // repayBorrowFresh emits repay-borrow-specific logs on errors, so we don't need to
        repayBorrowFresh(msg.sender, msg.sender, repayAmount);
    }

    /**
     * @notice Sender repays a borrow belonging to borrower
     * @param borrower the account with the debt being payed off
     * @param repayAmount The amount to repay, or -1 for the full outstanding amount
     */
    function repayBorrowBehalfInternal(
        address borrower,
        uint repayAmount
    ) internal nonReentrant {
        accrueInterest();
        // repayBorrowFresh emits repay-borrow-specific logs on errors, so we don't need to
        repayBorrowFresh(msg.sender, borrower, repayAmount);
    }

    /**
     * @notice Borrows are repaid by another user (possibly the borrower).
     * @param payer the account paying off the borrow
     * @param borrower the account with the debt being payed off
     * @param repayAmount the amount of underlying tokens being returned, or -1 for the full outstanding amount
     * @return (uint) the actual repayment amount.
     */
    function repayBorrowFresh(
        address payer,
        address borrower,
        uint repayAmount
    ) internal returns (uint) {
        /* Fail if repayBorrow not allowed */
        uint allowed = comptroller.repayBorrowAllowed(
            address(this),
            payer,
            borrower,
            repayAmount
        );
        if (allowed != 0) {
            revert RepayBorrowComptrollerRejection(allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            revert RepayBorrowFreshnessCheck();
        }

        /* We fetch the amount the borrower owes, with accumulated interest */
        uint accountBorrowsPrev = borrowBalanceStoredInternal(borrower);

        /* If repayAmount == -1, repayAmount = accountBorrows */
        uint repayAmountFinal = repayAmount == type(uint).max
            ? accountBorrowsPrev
            : repayAmount;

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We call doTransferIn for the payer and the repayAmount
         *  Note: The oToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the oToken holds an additional repayAmount of cash.
         *  doTransferIn reverts if anything goes wrong, since we can't be sure if side effects occurred.
         *   it returns the amount actually transferred, in case of a fee.
         */
        uint actualRepayAmount = doTransferIn(payer, repayAmountFinal);

        /*
         * We calculate the new borrower and total borrow balances, failing on underflow:
         *  accountBorrowsNew = accountBorrows - actualRepayAmount
         *  totalBorrowsNew = totalBorrows - actualRepayAmount
         */
        uint accountBorrowsNew = accountBorrowsPrev - actualRepayAmount;
        uint totalBorrowsNew = totalBorrows - actualRepayAmount;

        /* We write the previously calculated values into storage */
        accountBorrows[borrower].principal = accountBorrowsNew;
        accountBorrows[borrower].interestIndex = borrowIndex;
        totalBorrows = totalBorrowsNew;

        /* We emit a RepayBorrow event */
        emit RepayBorrow(
            payer,
            borrower,
            actualRepayAmount,
            accountBorrowsNew,
            totalBorrowsNew
        );

        return actualRepayAmount;
    }

    /**
     * @notice The sender iquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this oToken to be liquidated
     * @param oTokenCollateral The market in which to seize collateral from the borrower
     * @param repayAmount The amount of the underlying borrowed asset to repay
     */
    function liquidateBorrowInternal(
        address borrower,
        uint repayAmount,
        CTokenInterface oTokenCollateral
    ) internal nonReentrant {
        accrueInterest();

        uint error = oTokenCollateral.accrueInterest();
        if (error != NO_ERROR) {
            // accrueInterest emits logs on errors, but we still want to log the fact that an attempted liquidation failed
            revert LiquidateAccrueCollateralInterestFailed(error);
        }

        // liquidateBorrowFresh emits borrow-specific logs on errors, so we don't need to
        liquidateBorrowFresh(
            msg.sender,
            borrower,
            repayAmount,
            oTokenCollateral
        );
    }

    /**
     * @notice The liquidator liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this oToken to be liquidated
     * @param liquidator The address repaying the borrow and seizing collateral
     * @param oTokenCollateral The market in which to seize collateral from the borrower
     * @param repayAmount The amount of the underlying borrowed asset to repay
     */
    function liquidateBorrowFresh(
        address liquidator,
        address borrower,
        uint repayAmount,
        CTokenInterface oTokenCollateral
    ) internal {
        /* Fail if liquidate not allowed */
        uint allowed = comptroller.liquidateBorrowAllowed(
            address(this),
            address(oTokenCollateral),
            liquidator,
            borrower,
            repayAmount
        );
        if (allowed != 0) {
            revert LiquidateComptrollerRejection(allowed);
        }

        /* Verify market's block number equals current block number */
        if (accrualBlockNumber != getBlockNumber()) {
            revert LiquidateFreshnessCheck();
        }

        /* Verify oTokenCollateral market's block number equals current block number */
        if (oTokenCollateral.accrualBlockNumber() != getBlockNumber()) {
            revert LiquidateCollateralFreshnessCheck();
        }

        /* Fail if borrower = liquidator */
        if (borrower == liquidator) {
            revert LiquidateLiquidatorIsBorrower();
        }

        /* Fail if repayAmount = 0 */
        if (repayAmount == 0) {
            revert LiquidateCloseAmountIsZero();
        }

        /* Fail if repayAmount = -1 */
        if (repayAmount == type(uint).max) {
            revert LiquidateCloseAmountIsUintMax();
        }

        /* Fail if repayBorrow fails */
        uint actualRepayAmount = repayBorrowFresh(
            liquidator,
            borrower,
            repayAmount
        );

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We calculate the number of collateral tokens that will be seized */
        (uint amountSeizeError, uint seizeTokens) = comptroller
            .liquidateCalculateSeizeTokens(
                address(this),
                address(oTokenCollateral),
                actualRepayAmount
            );
        require(
            amountSeizeError == NO_ERROR,
            "LIQUIDATE_COMPTROLLER_CALCULATE_AMOUNT_SEIZE_FAILED"
        );

        /* Revert if borrower collateral token balance < seizeTokens */
        require(
            oTokenCollateral.balanceOf(borrower) >= seizeTokens,
            "LIQUIDATE_SEIZE_TOO_MUCH"
        );

        // If this is also the collateral, run seizeInternal to avoid re-entrancy, otherwise make an external call
        if (address(oTokenCollateral) == address(this)) {
            seizeInternal(address(this), liquidator, borrower, seizeTokens);
        } else {
            require(
                oTokenCollateral.seize(liquidator, borrower, seizeTokens) ==
                    NO_ERROR,
                "token seizure failed"
            );
        }

        /* We emit a LiquidateBorrow event */
        emit LiquidateBorrow(
            liquidator,
            borrower,
            actualRepayAmount,
            address(oTokenCollateral),
            seizeTokens
        );
    }

    /**
     * @notice Transfers collateral tokens (this market) to the liquidator.
     * @dev Will fail unless called by another oToken during the process of liquidation.
     *  Its absolutely critical to use msg.sender as the borrowed oToken and not a parameter.
     * @param liquidator The account receiving seized collateral
     * @param borrower The account having collateral seized
     * @param seizeTokens The number of oTokens to seize
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function seize(
        address liquidator,
        address borrower,
        uint seizeTokens
    ) external override nonReentrant returns (uint) {
        seizeInternal(msg.sender, liquidator, borrower, seizeTokens);

        return NO_ERROR;
    }

    /**
     * @notice Transfers collateral tokens (this market) to the liquidator.
     * @dev Called only during an in-kind liquidation, or by liquidateBorrow during the liquidation of another oToken.
     *  Its absolutely critical to use msg.sender as the seizer oToken and not a parameter.
     * @param seizerToken The contract seizing the collateral (i.e. borrowed oToken)
     * @param liquidator The account receiving seized collateral
     * @param borrower The account having collateral seized
     * @param seizeTokens The number of oTokens to seize
     */
    function seizeInternal(
        address seizerToken,
        address liquidator,
        address borrower,
        uint seizeTokens
    ) internal {
        /* Fail if seize not allowed */
        uint allowed = comptroller.seizeAllowed(
            address(this),
            seizerToken,
            liquidator,
            borrower,
            seizeTokens
        );
        if (allowed != 0) {
            revert LiquidateSeizeComptrollerRejection(allowed);
        }

        /* Fail if borrower = liquidator */
        if (borrower == liquidator) {
            revert LiquidateSeizeLiquidatorIsBorrower();
        }

        /*
         * We calculate the new borrower and liquidator token balances, failing on underflow/overflow:
         *  borrowerTokensNew = accountTokens[borrower] - seizeTokens
         *  liquidatorTokensNew = accountTokens[liquidator] + seizeTokens
         */
        uint protocolSeizeTokens = mul_(
            seizeTokens,
            Exp({mantissa: protocolSeizeShareMantissa})
        );
        uint liquidatorSeizeTokens = seizeTokens - protocolSeizeTokens;
        Exp memory exchangeRate = Exp({mantissa: exchangeRateStoredInternal()});
        uint protocolSeizeAmount = mul_ScalarTruncate(
            exchangeRate,
            protocolSeizeTokens
        );
        uint totalReservesNew = totalReserves + protocolSeizeAmount;

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We write the calculated values into storage */
        totalReserves = totalReservesNew;
        totalSupply = totalSupply - protocolSeizeTokens;
        accountTokens[borrower] = accountTokens[borrower] - seizeTokens;
        accountTokens[liquidator] =
            accountTokens[liquidator] +
            liquidatorSeizeTokens;

        /* Emit a Transfer event */
        emit Transfer(borrower, liquidator, liquidatorSeizeTokens);
        emit Transfer(borrower, address(this), protocolSeizeTokens);
        emit ReservesAdded(
            address(this),
            protocolSeizeAmount,
            totalReservesNew
        );
    }

    /*** Admin Functions ***/

    /**
     * @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
     * @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
     * @param newPendingAdmin New pending admin.
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setPendingAdmin(
        address payable newPendingAdmin
    ) external override returns (uint) {
        // Check caller = admin
        if (msg.sender != admin) {
            revert SetPendingAdminOwnerCheck();
        }

        // Save current value, if any, for inclusion in log
        address oldPendingAdmin = pendingAdmin;

        // Store pendingAdmin with value newPendingAdmin
        pendingAdmin = newPendingAdmin;

        // Emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin)
        emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin);

        return NO_ERROR;
    }

    /**
     * @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
     * @dev Admin function for pending admin to accept role and update admin
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _acceptAdmin() external override returns (uint) {
        // Check caller is pendingAdmin and pendingAdmin ≠ address(0)
        if (msg.sender != pendingAdmin || msg.sender == address(0)) {
            revert AcceptAdminPendingAdminCheck();
        }

        // Save current values for inclusion in log
        address oldAdmin = admin;
        address oldPendingAdmin = pendingAdmin;

        // Store admin with value pendingAdmin
        admin = pendingAdmin;

        // Clear the pending value
        pendingAdmin = payable(address(0));

        emit NewAdmin(oldAdmin, admin);
        emit NewPendingAdmin(oldPendingAdmin, pendingAdmin);

        return NO_ERROR;
    }

    function _blastClaimYield(address target) external {
        // Check caller is admin
        if (msg.sender != admin) {
            revert BlastYieldOwnerCheck();
        }
        BlastContract.claimAllYield(address(this), target);
        BlastContract.claimAllGas(address(this), target);
    }

    /**
     * @notice Gets the claimable amount of yield from the contract
     * @dev Admin function to get claimable yield
     * @return (uint256, uint256) of usdb and weth claimable
     */
    function _blastGetClaimableAmount()
        external
        view
        returns (uint256, uint256)
    {
        uint256 usdbAmount = USDBBlast.getClaimableAmount(address(this));
        uint256 wethAmount = WETHBlast.getClaimableAmount(address(this));

        return (usdbAmount, wethAmount);
    }

    /**
     * @notice Claims blast yield and sends it to the DAO
     * @dev Admin function to claim yield
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _blastClaimYieldAll() external returns (uint) {
        // Check caller is admin
        if (msg.sender != admin) {
            revert BlastYieldOwnerCheck();
        }

        uint256 usdbAmount = USDBBlast.getClaimableAmount(address(this));
        if (usdbAmount > 0) {
            USDBBlast.claim(address(this), usdbAmount);
            // Transfer funds to DAO
            bool res = USDBBlast.transfer(msg.sender, usdbAmount);
            if (!res) {
                revert BlastTransferFailed();
            }
        }

        uint256 wethAmount = WETHBlast.getClaimableAmount(address(this));
        if (wethAmount > 0) {
            WETHBlast.claim(address(this), wethAmount);
            bool res2 = WETHBlast.transfer(msg.sender, wethAmount);
            if (!res2) {
                revert BlastTransferFailed();
            }
        }

        return NO_ERROR;
    }

    /**
     * @notice Sets a new comptroller for the market
     * @dev Admin function to set a new comptroller
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setComptroller(
        ComptrollerInterface newComptroller
    ) public override returns (uint) {
        // Check caller is admin
        if (msg.sender != admin) {
            revert SetComptrollerOwnerCheck();
        }
        ComptrollerInterface oldComptroller = comptroller;
        // Ensure invoke comptroller.isComptroller() returns true
        require(newComptroller.isComptroller(), "marker method returned false");

        // Set market's comptroller to newComptroller
        comptroller = newComptroller;
        // Emit NewComptroller(oldComptroller, newComptroller)
        emit NewComptroller(oldComptroller, newComptroller);
        return NO_ERROR;
    }

    /**
     * @notice accrues interest and sets a new reserve factor for the protocol using _setReserveFactorFresh
     * @dev Admin function to accrue interest and set a new reserve factor
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setReserveFactor(
        uint newReserveFactorMantissa
    ) external override nonReentrant returns (uint) {
        accrueInterest();
        // _setReserveFactorFresh emits reserve-factor-specific logs on errors, so we don't need to.
        return _setReserveFactorFresh(newReserveFactorMantissa);
    }

    /**
     * @notice Sets a new reserve factor for the protocol (*requires fresh interest accrual)
     * @dev Admin function to set a new reserve factor
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setReserveFactorFresh(
        uint newReserveFactorMantissa
    ) internal returns (uint) {
        // Check caller is admin
        if (msg.sender != admin) {
            revert SetReserveFactorAdminCheck();
        }

        // Verify market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            revert SetReserveFactorFreshCheck();
        }

        // Check newReserveFactor ≤ maxReserveFactor
        if (newReserveFactorMantissa > reserveFactorMaxMantissa) {
            revert SetReserveFactorBoundsCheck();
        }

        uint oldReserveFactorMantissa = reserveFactorMantissa;
        reserveFactorMantissa = newReserveFactorMantissa;

        emit NewReserveFactor(
            oldReserveFactorMantissa,
            newReserveFactorMantissa
        );

        return NO_ERROR;
    }

    /**
     * @notice Accrues interest and reduces reserves by transferring from msg.sender
     * @param addAmount Amount of addition to reserves
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _addReservesInternal(
        uint addAmount
    ) internal nonReentrant returns (uint) {
        accrueInterest();

        // _addReservesFresh emits reserve-addition-specific logs on errors, so we don't need to.
        _addReservesFresh(addAmount);
        return NO_ERROR;
    }

    /**
     * @notice Add reserves by transferring from caller
     * @dev Requires fresh interest accrual
     * @param addAmount Amount of addition to reserves
     * @return (uint, uint) An error code (0=success, otherwise a failure (see ErrorReporter.sol for details)) and the actual amount added, net token fees
     */
    function _addReservesFresh(uint addAmount) internal returns (uint, uint) {
        // totalReserves + actualAddAmount
        uint totalReservesNew;
        uint actualAddAmount;

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            revert AddReservesFactorFreshCheck(actualAddAmount);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We call doTransferIn for the caller and the addAmount
         *  Note: The oToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the oToken holds an additional addAmount of cash.
         *  doTransferIn reverts if anything goes wrong, since we can't be sure if side effects occurred.
         *  it returns the amount actually transferred, in case of a fee.
         */

        actualAddAmount = doTransferIn(msg.sender, addAmount);

        totalReservesNew = totalReserves + actualAddAmount;

        // Store reserves[n+1] = reserves[n] + actualAddAmount
        totalReserves = totalReservesNew;

        /* Emit NewReserves(admin, actualAddAmount, reserves[n+1]) */
        emit ReservesAdded(msg.sender, actualAddAmount, totalReservesNew);

        /* Return (NO_ERROR, actualAddAmount) */
        return (NO_ERROR, actualAddAmount);
    }

    /**
     * @notice Accrues interest and reduces reserves by transferring to admin
     * @param reduceAmount Amount of reduction to reserves
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _reduceReserves(
        uint reduceAmount
    ) external override nonReentrant returns (uint) {
        accrueInterest();
        // _reduceReservesFresh emits reserve-reduction-specific logs on errors, so we don't need to.
        return _reduceReservesFresh(reduceAmount);
    }

    /**
     * @notice Reduces reserves by transferring to admin
     * @dev Requires fresh interest accrual
     * @param reduceAmount Amount of reduction to reserves
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _reduceReservesFresh(uint reduceAmount) internal returns (uint) {
        // totalReserves - reduceAmount
        uint totalReservesNew;

        // Check caller is admin
        if (msg.sender != admin) {
            revert ReduceReservesAdminCheck();
        }

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            revert ReduceReservesFreshCheck();
        }

        // Fail gracefully if protocol has insufficient underlying cash
        if (getCashPrior() < reduceAmount) {
            revert ReduceReservesCashNotAvailable();
        }

        // Check reduceAmount ≤ reserves[n] (totalReserves)
        if (reduceAmount > totalReserves) {
            revert ReduceReservesCashValidation();
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        totalReservesNew = totalReserves - reduceAmount;

        // Store reserves[n+1] = reserves[n] - reduceAmount
        totalReserves = totalReservesNew;

        // doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
        doTransferOut(admin, reduceAmount);

        emit ReservesReduced(admin, reduceAmount, totalReservesNew);

        return NO_ERROR;
    }

    /**
     * @notice accrues interest and updates the interest rate model using _setInterestRateModelFresh
     * @dev Admin function to accrue interest and update the interest rate model
     * @param newInterestRateModel the new interest rate model to use
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setInterestRateModel(
        InterestRateModel newInterestRateModel
    ) public override returns (uint) {
        accrueInterest();
        // _setInterestRateModelFresh emits interest-rate-model-update-specific logs on errors, so we don't need to.
        return _setInterestRateModelFresh(newInterestRateModel);
    }

    /**
     * @notice updates the interest rate model (*requires fresh interest accrual)
     * @dev Admin function to update the interest rate model
     * @param newInterestRateModel the new interest rate model to use
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setInterestRateModelFresh(
        InterestRateModel newInterestRateModel
    ) internal returns (uint) {
        // Used to store old model for use in the event that is emitted on success
        InterestRateModel oldInterestRateModel;

        // Check caller is admin
        if (msg.sender != admin) {
            revert SetInterestRateModelOwnerCheck();
        }

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            revert SetInterestRateModelFreshCheck();
        }

        // Track the market's current interest rate model
        oldInterestRateModel = interestRateModel;

        // Ensure invoke newInterestRateModel.isInterestRateModel() returns true
        require(
            newInterestRateModel.isInterestRateModel(),
            "marker method returned false"
        );

        // Set the interest rate model to newInterestRateModel
        interestRateModel = newInterestRateModel;

        // Emit NewMarketInterestRateModel(oldInterestRateModel, newInterestRateModel)
        emit NewMarketInterestRateModel(
            oldInterestRateModel,
            newInterestRateModel
        );

        return NO_ERROR;
    }

    /*** Safe Token ***/

    /**
     * @notice Gets balance of this contract in terms of the underlying
     * @dev This excludes the value of the current message, if any
     * @return The quantity of underlying owned by this contract
     */
    function getCashPrior() internal view virtual returns (uint);

    /**
     * @dev Performs a transfer in, reverting upon failure. Returns the amount actually transferred to the protocol, in case of a fee.
     *  This may revert due to insufficient balance or insufficient allowance.
     */
    function doTransferIn(
        address from,
        uint amount
    ) internal virtual returns (uint);

    /**
     * @dev Performs a transfer out, ideally returning an explanatory error code upon failure rather than reverting.
     *  If caller has not called checked protocol's balance, may revert due to insufficient cash held in the contract.
     *  If caller has checked protocol's balance, and verified it is >= amount, this should not revert in normal conditions.
     */
    function doTransferOut(address payable to, uint amount) internal virtual;

    /*** Reentrancy Guard ***/

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     */
    modifier nonReentrant() {
        require(_notEntered, "re-entered");
        _notEntered = false;
        _;
        _notEntered = true; // get a gas-refund post-Istanbul
    }
}

// SPDX-License-Identifier: BSD-3-Clause
pragma solidity ^0.8.10;

import "./OToken.sol";

abstract contract PriceOracle {
    /// @notice Indicator that this is a PriceOracle contract (for inspection)
    bool public constant isPriceOracle = true;

    /**
      * @notice Get the underlying price of a oToken asset
      * @param oToken The oToken to get the underlying price of
      * @return The underlying asset price mantissa (scaled by 1e18).
      *  Zero means the price is unavailable.
      */
    function getUnderlyingPrice(OToken oToken) virtual external view returns (uint);
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

import "./PythStructs.sol";
import "./IPythEvents.sol";

/// @title Consume prices from the Pyth Network (https://pyth.network/).
/// @dev Please refer to the guidance at https://docs.pyth.network/documentation/pythnet-price-feeds/best-practices for how to consume prices safely.
/// @author Pyth Data Association
interface IPyth is IPythEvents {
    /// @notice Returns the period (in seconds) that a price feed is considered valid since its publish time
    function getValidTimePeriod() external view returns (uint validTimePeriod);

    /// @notice Returns the price and confidence interval.
    /// @dev Reverts if the price has not been updated within the last `getValidTimePeriod()` seconds.
    /// @param id The Pyth Price Feed ID of which to fetch the price and confidence interval.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getPrice(
        bytes32 id
    ) external view returns (PythStructs.Price memory price);

    /// @notice Returns the exponentially-weighted moving average price and confidence interval.
    /// @dev Reverts if the EMA price is not available.
    /// @param id The Pyth Price Feed ID of which to fetch the EMA price and confidence interval.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getEmaPrice(
        bytes32 id
    ) external view returns (PythStructs.Price memory price);

    /// @notice Returns the price of a price feed without any sanity checks.
    /// @dev This function returns the most recent price update in this contract without any recency checks.
    /// This function is unsafe as the returned price update may be arbitrarily far in the past.
    ///
    /// Users of this function should check the `publishTime` in the price to ensure that the returned price is
    /// sufficiently recent for their application. If you are considering using this function, it may be
    /// safer / easier to use either `getPrice` or `getPriceNoOlderThan`.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getPriceUnsafe(
        bytes32 id
    ) external view returns (PythStructs.Price memory price);

    /// @notice Returns the price that is no older than `age` seconds of the current time.
    /// @dev This function is a sanity-checked version of `getPriceUnsafe` which is useful in
    /// applications that require a sufficiently-recent price. Reverts if the price wasn't updated sufficiently
    /// recently.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getPriceNoOlderThan(
        bytes32 id,
        uint age
    ) external view returns (PythStructs.Price memory price);

    /// @notice Returns the exponentially-weighted moving average price of a price feed without any sanity checks.
    /// @dev This function returns the same price as `getEmaPrice` in the case where the price is available.
    /// However, if the price is not recent this function returns the latest available price.
    ///
    /// The returned price can be from arbitrarily far in the past; this function makes no guarantees that
    /// the returned price is recent or useful for any particular application.
    ///
    /// Users of this function should check the `publishTime` in the price to ensure that the returned price is
    /// sufficiently recent for their application. If you are considering using this function, it may be
    /// safer / easier to use either `getEmaPrice` or `getEmaPriceNoOlderThan`.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getEmaPriceUnsafe(
        bytes32 id
    ) external view returns (PythStructs.Price memory price);

    /// @notice Returns the exponentially-weighted moving average price that is no older than `age` seconds
    /// of the current time.
    /// @dev This function is a sanity-checked version of `getEmaPriceUnsafe` which is useful in
    /// applications that require a sufficiently-recent price. Reverts if the price wasn't updated sufficiently
    /// recently.
    /// @return price - please read the documentation of PythStructs.Price to understand how to use this safely.
    function getEmaPriceNoOlderThan(
        bytes32 id,
        uint age
    ) external view returns (PythStructs.Price memory price);

    /// @notice Update price feeds with given update messages.
    /// This method requires the caller to pay a fee in wei; the required fee can be computed by calling
    /// `getUpdateFee` with the length of the `updateData` array.
    /// Prices will be updated if they are more recent than the current stored prices.
    /// The call will succeed even if the update is not the most recent.
    /// @dev Reverts if the transferred fee is not sufficient or the updateData is invalid.
    /// @param updateData Array of price update data.
    function updatePriceFeeds(bytes[] calldata updateData) external payable;

    /// @notice Wrapper around updatePriceFeeds that rejects fast if a price update is not necessary. A price update is
    /// necessary if the current on-chain publishTime is older than the given publishTime. It relies solely on the
    /// given `publishTimes` for the price feeds and does not read the actual price update publish time within `updateData`.
    ///
    /// This method requires the caller to pay a fee in wei; the required fee can be computed by calling
    /// `getUpdateFee` with the length of the `updateData` array.
    ///
    /// `priceIds` and `publishTimes` are two arrays with the same size that correspond to senders known publishTime
    /// of each priceId when calling this method. If all of price feeds within `priceIds` have updated and have
    /// a newer or equal publish time than the given publish time, it will reject the transaction to save gas.
    /// Otherwise, it calls updatePriceFeeds method to update the prices.
    ///
    /// @dev Reverts if update is not needed or the transferred fee is not sufficient or the updateData is invalid.
    /// @param updateData Array of price update data.
    /// @param priceIds Array of price ids.
    /// @param publishTimes Array of publishTimes. `publishTimes[i]` corresponds to known `publishTime` of `priceIds[i]`
    function updatePriceFeedsIfNecessary(
        bytes[] calldata updateData,
        bytes32[] calldata priceIds,
        uint64[] calldata publishTimes
    ) external payable;

    /// @notice Returns the required fee to update an array of price updates.
    /// @param updateData Array of price update data.
    /// @return feeAmount The required fee in Wei.
    function getUpdateFee(
        bytes[] calldata updateData
    ) external view returns (uint feeAmount);

    /// @notice Parse `updateData` and return price feeds of the given `priceIds` if they are all published
    /// within `minPublishTime` and `maxPublishTime`.
    ///
    /// You can use this method if you want to use a Pyth price at a fixed time and not the most recent price;
    /// otherwise, please consider using `updatePriceFeeds`. This method may store the price updates on-chain, if they
    /// are more recent than the current stored prices.
    ///
    /// This method requires the caller to pay a fee in wei; the required fee can be computed by calling
    /// `getUpdateFee` with the length of the `updateData` array.
    ///
    ///
    /// @dev Reverts if the transferred fee is not sufficient or the updateData is invalid or there is
    /// no update for any of the given `priceIds` within the given time range.
    /// @param updateData Array of price update data.
    /// @param priceIds Array of price ids.
    /// @param minPublishTime minimum acceptable publishTime for the given `priceIds`.
    /// @param maxPublishTime maximum acceptable publishTime for the given `priceIds`.
    /// @return priceFeeds Array of the price feeds corresponding to the given `priceIds` (with the same order).
    function parsePriceFeedUpdates(
        bytes[] calldata updateData,
        bytes32[] calldata priceIds,
        uint64 minPublishTime,
        uint64 maxPublishTime
    ) external payable returns (PythStructs.PriceFeed[] memory priceFeeds);

    /// @notice Similar to `parsePriceFeedUpdates` but ensures the updates returned are
    /// the first updates published in minPublishTime. That is, if there are multiple updates for a given timestamp,
    /// this method will return the first update. This method may store the price updates on-chain, if they
    /// are more recent than the current stored prices.
    ///
    ///
    /// @dev Reverts if the transferred fee is not sufficient or the updateData is invalid or there is
    /// no update for any of the given `priceIds` within the given time range and uniqueness condition.
    /// @param updateData Array of price update data.
    /// @param priceIds Array of price ids.
    /// @param minPublishTime minimum acceptable publishTime for the given `priceIds`.
    /// @param maxPublishTime maximum acceptable publishTime for the given `priceIds`.
    /// @return priceFeeds Array of the price feeds corresponding to the given `priceIds` (with the same order).
    function parsePriceFeedUpdatesUnique(
        bytes[] calldata updateData,
        bytes32[] calldata priceIds,
        uint64 minPublishTime,
        uint64 maxPublishTime
    ) external payable returns (PythStructs.PriceFeed[] memory priceFeeds);
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

/// @title IPythEvents contains the events that Pyth contract emits.
/// @dev This interface can be used for listening to the updates for off-chain and testing purposes.
interface IPythEvents {
    /// @dev Emitted when the price feed with `id` has received a fresh update.
    /// @param id The Pyth Price Feed ID.
    /// @param publishTime Publish time of the given price update.
    /// @param price Price of the given price update.
    /// @param conf Confidence interval of the given price update.
    event PriceFeedUpdate(
        bytes32 indexed id,
        uint64 publishTime,
        int64 price,
        uint64 conf
    );

    /// @dev Emitted when a batch price update is processed successfully.
    /// @param chainId ID of the source chain that the batch price update comes from.
    /// @param sequenceNumber Sequence number of the batch price update.
    event BatchPriceFeedUpdate(uint16 chainId, uint64 sequenceNumber);
}

// SPDX-License-Identifier: Apache-2.0
pragma solidity ^0.8.0;

contract PythStructs {
    // A price with a degree of uncertainty, represented as a price +- a confidence interval.
    //
    // The confidence interval roughly corresponds to the standard error of a normal distribution.
    // Both the price and confidence are stored in a fixed-point numeric representation,
    // `x * (10^expo)`, where `expo` is the exponent.
    //
    // Please refer to the documentation at https://docs.pyth.network/documentation/pythnet-price-feeds/best-practices for how
    // to how this price safely.
    struct Price {
        // Price
        int64 price;
        // Confidence interval around the price
        uint64 conf;
        // Price exponent
        int32 expo;
        // Unix timestamp describing when the price was published
        uint publishTime;
    }

    // PriceFeed represents a current aggregate price from pyth publisher feeds.
    struct PriceFeed {
        // The price ID.
        bytes32 id;
        // Latest available price
        Price price;
        // Latest available exponentially-weighted moving average price
        Price emaPrice;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"OraclePriceLessThanZero","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"OwnableInvalidOwner","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"OwnableUnauthorizedAccount","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[{"internalType":"uint256","name":"val","type":"uint256"}],"name":"_setPriceInvalidAfterSec","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"addressToPriceFeedID","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract OToken","name":"oToken","type":"address"}],"name":"getUnderlyingPrice","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"isPriceOracle","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pyth","outputs":[{"internalType":"contract IPyth","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address[]","name":"underlyingAssets","type":"address[]"},{"internalType":"bytes32[]","name":"priceFeedIds","type":"bytes32[]"}],"name":"setPriceFeedIds","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IPyth","name":"_pyth","type":"address"}],"name":"setPythOracle","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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