Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT

pragma solidity 0.8.24;

import {LowLevelWETH} from "@looksrare/contracts-libs/contracts/lowLevelCallers/LowLevelWETH.sol";
import {IWETH} from "@looksrare/contracts-libs/contracts/interfaces/generic/IWETH.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";

import {LiquidityPool} from "./LiquidityPool.sol";
import {ILiquidityPool} from "./interfaces/ILiquidityPool.sol";
import {IERC20Rebasing, YieldMode} from "./interfaces/IERC20Rebasing.sol";

/**
 * @title EthLiquidityPool
 * @notice This contract allows depositors to act as the counterparty of players of our games.
 * @author YOLO Games protocol team
 */
contract EthLiquidityPool is LiquidityPool, LowLevelWETH {
    /**
     * @param _owner Owner of the contract
     * @param _weth WETH contract address
     * @param _gameConfigurationManager Liquidity manager contract address
     * @param _liquidityPoolRouter Liquidity pool router contract address
     * @param _blast Blast precompile
     * @param _blastPoints Blast points
     * @param _blastPointsOperator Blast points operator
     */
    constructor(
        address _owner,
        address _weth,
        address _gameConfigurationManager,
        address _liquidityPoolRouter,
        address _blast,
        address _blastPoints,
        address _blastPointsOperator
    )
        LiquidityPool(
            "YOLO Games ETH",
            "yETH",
            _owner,
            _weth,
            _gameConfigurationManager,
            _liquidityPoolRouter,
            _blast,
            _blastPoints,
            _blastPointsOperator
        )
    {
        IERC20Rebasing(_weth).configure(YieldMode.CLAIMABLE);
    }

    /**
     * @inheritdoc ILiquidityPool
     */
    function transferPayoutToPlayer(address game, uint256 amount, address receiver) external nonReentrant {
        _onlyGameConfigurationManager();

        address weth = asset();

        uint256 balance = IERC20(weth).balanceOf(address(this));
        if (balance < amount) {
            emit InsufficientFundsForPayout(game, receiver, address(0), amount - balance);
            amount = balance;
        }

        IWETH(weth).withdraw(amount);

        _transferETHAndWrapIfFailWithGasLimit(weth, receiver, amount, 2_300);

        emit PayoutTransferred(game, receiver, address(0), amount);
    }

    /**
     * @inheritdoc ILiquidityPool
     */
    function transferProtocolFee(address game, uint256 amount, address protocolFeeRecipient) external nonReentrant {
        _onlyGameConfigurationManager();
        address weth = asset();
        uint256 balance = IERC20(weth).balanceOf(address(this));
        if (balance >= amount) {
            IWETH(weth).withdraw(amount);
            _transferETHAndWrapIfFailWithGasLimit(weth, protocolFeeRecipient, amount, gasleft());
            emit ProtocolFeeTransferred(game, protocolFeeRecipient, address(0), amount);
        }
    }

    /**
     * @notice This is only meant for receiving payouts, no one should send ETH to this contract and expect to get shares.
     */
    receive() external payable {
        address weth = asset();
        if (msg.sender != weth) {
            IWETH(weth).deposit{value: msg.value}();
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

/**
 * @notice It is emitted if the call recipient is not a contract.
 */
error NotAContract();

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

/**
 * @notice It is emitted if the ETH transfer fails.
 */
error ETHTransferFail();

/**
 * @notice It is emitted if the ERC20 approval fails.
 */
error ERC20ApprovalFail();

/**
 * @notice It is emitted if the ERC20 transfer fails.
 */
error ERC20TransferFail();

/**
 * @notice It is emitted if the ERC20 transferFrom fails.
 */
error ERC20TransferFromFail();

/**
 * @notice It is emitted if the ERC721 transferFrom fails.
 */
error ERC721TransferFromFail();

/**
 * @notice It is emitted if the ERC1155 safeTransferFrom fails.
 */
error ERC1155SafeTransferFromFail();

/**
 * @notice It is emitted if the ERC1155 safeBatchTransferFrom fails.
 */
error ERC1155SafeBatchTransferFromFail();

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

interface IERC20 {
    event Transfer(address indexed from, address indexed to, uint256 value);

    event Approval(address indexed owner, address indexed spender, uint256 value);

    function totalSupply() external view returns (uint256);

    function balanceOf(address account) external view returns (uint256);

    function transfer(address to, uint256 amount) external returns (bool);

    function allowance(address owner, address spender) external view returns (uint256);

    function approve(address spender, uint256 amount) external returns (bool);

    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity >=0.5.0;

interface IWETH {
    function deposit() external payable;

    function transfer(address dst, uint256 wad) external returns (bool);

    function withdraw(uint256 wad) external;
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

/**
 * @title IOwnableTwoSteps
 * @author LooksRare protocol team (👀,💎)
 */
interface IOwnableTwoSteps {
    /**
     * @notice This enum keeps track of the ownership status.
     * @param NoOngoingTransfer The default status when the owner is set
     * @param TransferInProgress The status when a transfer to a new owner is initialized
     * @param RenouncementInProgress The status when a transfer to address(0) is initialized
     */
    enum Status {
        NoOngoingTransfer,
        TransferInProgress,
        RenouncementInProgress
    }

    /**
     * @notice This is returned when there is no transfer of ownership in progress.
     */
    error NoOngoingTransferInProgress();

    /**
     * @notice This is returned when the caller is not the owner.
     */
    error NotOwner();

    /**
     * @notice This is returned when there is no renouncement in progress but
     *         the owner tries to validate the ownership renouncement.
     */
    error RenouncementNotInProgress();

    /**
     * @notice This is returned when the transfer is already in progress but the owner tries
     *         initiate a new ownership transfer.
     */
    error TransferAlreadyInProgress();

    /**
     * @notice This is returned when there is no ownership transfer in progress but the
     *         ownership change tries to be approved.
     */
    error TransferNotInProgress();

    /**
     * @notice This is returned when the ownership transfer is attempted to be validated by the
     *         a caller that is not the potential owner.
     */
    error WrongPotentialOwner();

    /**
     * @notice This is emitted if the ownership transfer is cancelled.
     */
    event CancelOwnershipTransfer();

    /**
     * @notice This is emitted if the ownership renouncement is initiated.
     */
    event InitiateOwnershipRenouncement();

    /**
     * @notice This is emitted if the ownership transfer is initiated.
     * @param previousOwner Previous/current owner
     * @param potentialOwner Potential/future owner
     */
    event InitiateOwnershipTransfer(address previousOwner, address potentialOwner);

    /**
     * @notice This is emitted when there is a new owner.
     */
    event NewOwner(address newOwner);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

/**
 * @title IReentrancyGuard
 * @author LooksRare protocol team (👀,💎)
 */
interface IReentrancyGuard {
    /**
     * @notice This is returned when there is a reentrant call.
     */
    error ReentrancyFail();
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

// Interfaces
import {IERC20} from "../interfaces/generic/IERC20.sol";

// Errors
import {ERC20TransferFail, ERC20TransferFromFail} from "../errors/LowLevelErrors.sol";
import {NotAContract} from "../errors/GenericErrors.sol";

/**
 * @title LowLevelERC20Transfer
 * @notice This contract contains low-level calls to transfer ERC20 tokens.
 * @author LooksRare protocol team (👀,💎)
 */
contract LowLevelERC20Transfer {
    /**
     * @notice Execute ERC20 transferFrom
     * @param currency Currency address
     * @param from Sender address
     * @param to Recipient address
     * @param amount Amount to transfer
     */
    function _executeERC20TransferFrom(address currency, address from, address to, uint256 amount) internal {
        if (currency.code.length == 0) {
            revert NotAContract();
        }

        (bool status, bytes memory data) = currency.call(abi.encodeCall(IERC20.transferFrom, (from, to, amount)));

        if (!status) {
            revert ERC20TransferFromFail();
        }

        if (data.length > 0) {
            if (!abi.decode(data, (bool))) {
                revert ERC20TransferFromFail();
            }
        }
    }

    /**
     * @notice Execute ERC20 (direct) transfer
     * @param currency Currency address
     * @param to Recipient address
     * @param amount Amount to transfer
     */
    function _executeERC20DirectTransfer(address currency, address to, uint256 amount) internal {
        if (currency.code.length == 0) {
            revert NotAContract();
        }

        (bool status, bytes memory data) = currency.call(abi.encodeCall(IERC20.transfer, (to, amount)));

        if (!status) {
            revert ERC20TransferFail();
        }

        if (data.length > 0) {
            if (!abi.decode(data, (bool))) {
                revert ERC20TransferFail();
            }
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

// Interfaces
import {IWETH} from "../interfaces/generic/IWETH.sol";

/**
 * @title LowLevelWETH
 * @notice This contract contains a function to transfer ETH with an option to wrap to WETH.
 *         If the ETH transfer fails within a gas limit, the amount in ETH is wrapped to WETH and then transferred.
 * @author LooksRare protocol team (👀,💎)
 */
contract LowLevelWETH {
    /**
     * @notice It transfers ETH to a recipient with a specified gas limit.
     *         If the original transfers fails, it wraps to WETH and transfers the WETH to recipient.
     * @param _WETH WETH address
     * @param _to Recipient address
     * @param _amount Amount to transfer
     * @param _gasLimit Gas limit to perform the ETH transfer
     */
    function _transferETHAndWrapIfFailWithGasLimit(
        address _WETH,
        address _to,
        uint256 _amount,
        uint256 _gasLimit
    ) internal {
        bool status;

        assembly {
            status := call(_gasLimit, _to, _amount, 0, 0, 0, 0)
        }

        if (!status) {
            IWETH(_WETH).deposit{value: _amount}();
            IWETH(_WETH).transfer(_to, _amount);
        }
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

// Interfaces
import {IOwnableTwoSteps} from "./interfaces/IOwnableTwoSteps.sol";

/**
 * @title OwnableTwoSteps
 * @notice This contract offers transfer of ownership in two steps with potential owner
 *         having to confirm the transaction to become the owner.
 *         Renouncement of the ownership is also a two-step process since the next potential owner is the address(0).
 * @author LooksRare protocol team (👀,💎)
 */
abstract contract OwnableTwoSteps is IOwnableTwoSteps {
    /**
     * @notice Address of the current owner.
     */
    address public owner;

    /**
     * @notice Address of the potential owner.
     */
    address public potentialOwner;

    /**
     * @notice Ownership status.
     */
    Status public ownershipStatus;

    /**
     * @notice Modifier to wrap functions for contracts that inherit this contract.
     */
    modifier onlyOwner() {
        _onlyOwner();
        _;
    }

    /**
     * @notice Constructor
     * @param _owner The contract's owner
     */
    constructor(address _owner) {
        owner = _owner;
        emit NewOwner(_owner);
    }

    /**
     * @notice This function is used to cancel the ownership transfer.
     * @dev This function can be used for both cancelling a transfer to a new owner and
     *      cancelling the renouncement of the ownership.
     */
    function cancelOwnershipTransfer() external onlyOwner {
        Status _ownershipStatus = ownershipStatus;
        if (_ownershipStatus == Status.NoOngoingTransfer) {
            revert NoOngoingTransferInProgress();
        }

        if (_ownershipStatus == Status.TransferInProgress) {
            delete potentialOwner;
        }

        delete ownershipStatus;

        emit CancelOwnershipTransfer();
    }

    /**
     * @notice This function is used to confirm the ownership renouncement.
     */
    function confirmOwnershipRenouncement() external onlyOwner {
        if (ownershipStatus != Status.RenouncementInProgress) {
            revert RenouncementNotInProgress();
        }

        delete owner;
        delete ownershipStatus;

        emit NewOwner(address(0));
    }

    /**
     * @notice This function is used to confirm the ownership transfer.
     * @dev This function can only be called by the current potential owner.
     */
    function confirmOwnershipTransfer() external {
        if (ownershipStatus != Status.TransferInProgress) {
            revert TransferNotInProgress();
        }

        if (msg.sender != potentialOwner) {
            revert WrongPotentialOwner();
        }

        owner = msg.sender;
        delete ownershipStatus;
        delete potentialOwner;

        emit NewOwner(msg.sender);
    }

    /**
     * @notice This function is used to initiate the transfer of ownership to a new owner.
     * @param newPotentialOwner New potential owner address
     */
    function initiateOwnershipTransfer(address newPotentialOwner) external onlyOwner {
        if (ownershipStatus != Status.NoOngoingTransfer) {
            revert TransferAlreadyInProgress();
        }

        ownershipStatus = Status.TransferInProgress;
        potentialOwner = newPotentialOwner;

        /**
         * @dev This function can only be called by the owner, so msg.sender is the owner.
         *      We don't have to SLOAD the owner again.
         */
        emit InitiateOwnershipTransfer(msg.sender, newPotentialOwner);
    }

    /**
     * @notice This function is used to initiate the ownership renouncement.
     */
    function initiateOwnershipRenouncement() external onlyOwner {
        if (ownershipStatus != Status.NoOngoingTransfer) {
            revert TransferAlreadyInProgress();
        }

        ownershipStatus = Status.RenouncementInProgress;

        emit InitiateOwnershipRenouncement();
    }

    function _onlyOwner() private view {
        if (msg.sender != owner) revert NotOwner();
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

/**
 * @title Pausable
 * @notice This contract makes it possible to pause the contract.
 *         It is adjusted from OpenZeppelin.
 * @author LooksRare protocol team (👀,💎)
 */
abstract contract Pausable {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    error IsPaused();
    error NotPaused();

    bool private _paused;

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        _requireNotPaused();
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        _requirePaused();
        _;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view virtual returns (bool) {
        return _paused;
    }

    /**
     * @dev Throws if the contract is paused.
     */
    function _requireNotPaused() internal view virtual {
        if (paused()) {
            revert IsPaused();
        }
    }

    /**
     * @dev Throws if the contract is not paused.
     */
    function _requirePaused() internal view virtual {
        if (!paused()) {
            revert NotPaused();
        }
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(msg.sender);
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(msg.sender);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.17;

// Interfaces
import {IReentrancyGuard} from "./interfaces/IReentrancyGuard.sol";

/**
 * @title ReentrancyGuard
 * @notice This contract protects against reentrancy attacks.
 *         It is adjusted from OpenZeppelin.
 * @author LooksRare protocol team (👀,💎)
 */
abstract contract ReentrancyGuard is IReentrancyGuard {
    uint256 private _status;

    /**
     * @notice Modifier to wrap functions to prevent reentrancy calls.
     */
    modifier nonReentrant() {
        if (_status == 2) {
            revert ReentrancyFail();
        }

        _status = 2;
        _;
        _status = 1;
    }

    constructor() {
        _status = 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/draft-IERC6093.sol)
pragma solidity ^0.8.20;

/**
 * @dev Standard ERC20 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC20 tokens.
 */
interface IERC20Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientBalance(address sender, uint256 balance, uint256 needed);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC20InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC20InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `spender`’s `allowance`. Used in transfers.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     * @param allowance Amount of tokens a `spender` is allowed to operate with.
     * @param needed Minimum amount required to perform a transfer.
     */
    error ERC20InsufficientAllowance(address spender, uint256 allowance, uint256 needed);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC20InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `spender` to be approved. Used in approvals.
     * @param spender Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC20InvalidSpender(address spender);
}

/**
 * @dev Standard ERC721 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC721 tokens.
 */
interface IERC721Errors {
    /**
     * @dev Indicates that an address can't be an owner. For example, `address(0)` is a forbidden owner in EIP-20.
     * Used in balance queries.
     * @param owner Address of the current owner of a token.
     */
    error ERC721InvalidOwner(address owner);

    /**
     * @dev Indicates a `tokenId` whose `owner` is the zero address.
     * @param tokenId Identifier number of a token.
     */
    error ERC721NonexistentToken(uint256 tokenId);

    /**
     * @dev Indicates an error related to the ownership over a particular token. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param tokenId Identifier number of a token.
     * @param owner Address of the current owner of a token.
     */
    error ERC721IncorrectOwner(address sender, uint256 tokenId, address owner);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC721InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC721InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param tokenId Identifier number of a token.
     */
    error ERC721InsufficientApproval(address operator, uint256 tokenId);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC721InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC721InvalidOperator(address operator);
}

/**
 * @dev Standard ERC1155 Errors
 * Interface of the https://eips.ethereum.org/EIPS/eip-6093[ERC-6093] custom errors for ERC1155 tokens.
 */
interface IERC1155Errors {
    /**
     * @dev Indicates an error related to the current `balance` of a `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     * @param balance Current balance for the interacting account.
     * @param needed Minimum amount required to perform a transfer.
     * @param tokenId Identifier number of a token.
     */
    error ERC1155InsufficientBalance(address sender, uint256 balance, uint256 needed, uint256 tokenId);

    /**
     * @dev Indicates a failure with the token `sender`. Used in transfers.
     * @param sender Address whose tokens are being transferred.
     */
    error ERC1155InvalidSender(address sender);

    /**
     * @dev Indicates a failure with the token `receiver`. Used in transfers.
     * @param receiver Address to which tokens are being transferred.
     */
    error ERC1155InvalidReceiver(address receiver);

    /**
     * @dev Indicates a failure with the `operator`’s approval. Used in transfers.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     * @param owner Address of the current owner of a token.
     */
    error ERC1155MissingApprovalForAll(address operator, address owner);

    /**
     * @dev Indicates a failure with the `approver` of a token to be approved. Used in approvals.
     * @param approver Address initiating an approval operation.
     */
    error ERC1155InvalidApprover(address approver);

    /**
     * @dev Indicates a failure with the `operator` to be approved. Used in approvals.
     * @param operator Address that may be allowed to operate on tokens without being their owner.
     */
    error ERC1155InvalidOperator(address operator);

    /**
     * @dev Indicates an array length mismatch between ids and values in a safeBatchTransferFrom operation.
     * Used in batch transfers.
     * @param idsLength Length of the array of token identifiers
     * @param valuesLength Length of the array of token amounts
     */
    error ERC1155InvalidArrayLength(uint256 idsLength, uint256 valuesLength);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";
import {IERC20Metadata} from "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/ERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "./IERC20.sol";
import {IERC20Metadata} from "./extensions/IERC20Metadata.sol";
import {Context} from "../../utils/Context.sol";
import {IERC20Errors} from "../../interfaces/draft-IERC6093.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.openzeppelin.com/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * The default value of {decimals} is 18. To change this, you should override
 * this function so it returns a different value.
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 */
abstract contract ERC20 is Context, IERC20, IERC20Metadata, IERC20Errors {
    mapping(address account => uint256) private _balances;

    mapping(address account => mapping(address spender => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the default value returned by this function, unless
     * it's overridden.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `to` cannot be the zero address.
     * - the caller must have a balance of at least `value`.
     */
    function transfer(address to, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _transfer(owner, to, value);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * NOTE: If `value` is the maximum `uint256`, the allowance is not updated on
     * `transferFrom`. This is semantically equivalent to an infinite approval.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 value) public virtual returns (bool) {
        address owner = _msgSender();
        _approve(owner, spender, value);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * NOTE: Does not update the allowance if the current allowance
     * is the maximum `uint256`.
     *
     * Requirements:
     *
     * - `from` and `to` cannot be the zero address.
     * - `from` must have a balance of at least `value`.
     * - the caller must have allowance for ``from``'s tokens of at least
     * `value`.
     */
    function transferFrom(address from, address to, uint256 value) public virtual returns (bool) {
        address spender = _msgSender();
        _spendAllowance(from, spender, value);
        _transfer(from, to, value);
        return true;
    }

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _transfer(address from, address to, uint256 value) internal {
        if (from == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        if (to == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(from, to, value);
    }

    /**
     * @dev Transfers a `value` amount of tokens from `from` to `to`, or alternatively mints (or burns) if `from`
     * (or `to`) is the zero address. All customizations to transfers, mints, and burns should be done by overriding
     * this function.
     *
     * Emits a {Transfer} event.
     */
    function _update(address from, address to, uint256 value) internal virtual {
        if (from == address(0)) {
            // Overflow check required: The rest of the code assumes that totalSupply never overflows
            _totalSupply += value;
        } else {
            uint256 fromBalance = _balances[from];
            if (fromBalance < value) {
                revert ERC20InsufficientBalance(from, fromBalance, value);
            }
            unchecked {
                // Overflow not possible: value <= fromBalance <= totalSupply.
                _balances[from] = fromBalance - value;
            }
        }

        if (to == address(0)) {
            unchecked {
                // Overflow not possible: value <= totalSupply or value <= fromBalance <= totalSupply.
                _totalSupply -= value;
            }
        } else {
            unchecked {
                // Overflow not possible: balance + value is at most totalSupply, which we know fits into a uint256.
                _balances[to] += value;
            }
        }

        emit Transfer(from, to, value);
    }

    /**
     * @dev Creates a `value` amount of tokens and assigns them to `account`, by transferring it from address(0).
     * Relies on the `_update` mechanism
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead.
     */
    function _mint(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidReceiver(address(0));
        }
        _update(address(0), account, value);
    }

    /**
     * @dev Destroys a `value` amount of tokens from `account`, lowering the total supply.
     * Relies on the `_update` mechanism.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * NOTE: This function is not virtual, {_update} should be overridden instead
     */
    function _burn(address account, uint256 value) internal {
        if (account == address(0)) {
            revert ERC20InvalidSender(address(0));
        }
        _update(account, address(0), value);
    }

    /**
     * @dev Sets `value` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     *
     * Overrides to this logic should be done to the variant with an additional `bool emitEvent` argument.
     */
    function _approve(address owner, address spender, uint256 value) internal {
        _approve(owner, spender, value, true);
    }

    /**
     * @dev Variant of {_approve} with an optional flag to enable or disable the {Approval} event.
     *
     * By default (when calling {_approve}) the flag is set to true. On the other hand, approval changes made by
     * `_spendAllowance` during the `transferFrom` operation set the flag to false. This saves gas by not emitting any
     * `Approval` event during `transferFrom` operations.
     *
     * Anyone who wishes to continue emitting `Approval` events on the`transferFrom` operation can force the flag to
     * true using the following override:
     * ```
     * function _approve(address owner, address spender, uint256 value, bool) internal virtual override {
     *     super._approve(owner, spender, value, true);
     * }
     * ```
     *
     * Requirements are the same as {_approve}.
     */
    function _approve(address owner, address spender, uint256 value, bool emitEvent) internal virtual {
        if (owner == address(0)) {
            revert ERC20InvalidApprover(address(0));
        }
        if (spender == address(0)) {
            revert ERC20InvalidSpender(address(0));
        }
        _allowances[owner][spender] = value;
        if (emitEvent) {
            emit Approval(owner, spender, value);
        }
    }

    /**
     * @dev Updates `owner` s allowance for `spender` based on spent `value`.
     *
     * Does not update the allowance value in case of infinite allowance.
     * Revert if not enough allowance is available.
     *
     * Does not emit an {Approval} event.
     */
    function _spendAllowance(address owner, address spender, uint256 value) internal virtual {
        uint256 currentAllowance = allowance(owner, spender);
        if (currentAllowance != type(uint256).max) {
            if (currentAllowance < value) {
                revert ERC20InsufficientAllowance(spender, currentAllowance, value);
            }
            unchecked {
                _approve(owner, spender, currentAllowance - value, false);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/ERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20, IERC20Metadata, ERC20} from "../ERC20.sol";
import {SafeERC20} from "../utils/SafeERC20.sol";
import {IERC4626} from "../../../interfaces/IERC4626.sol";
import {Math} from "../../../utils/math/Math.sol";

/**
 * @dev Implementation of the ERC4626 "Tokenized Vault Standard" as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[EIP-4626].
 *
 * This extension allows the minting and burning of "shares" (represented using the ERC20 inheritance) in exchange for
 * underlying "assets" through standardized {deposit}, {mint}, {redeem} and {burn} workflows. This contract extends
 * the ERC20 standard. Any additional extensions included along it would affect the "shares" token represented by this
 * contract and not the "assets" token which is an independent contract.
 *
 * [CAUTION]
 * ====
 * In empty (or nearly empty) ERC-4626 vaults, deposits are at high risk of being stolen through frontrunning
 * with a "donation" to the vault that inflates the price of a share. This is variously known as a donation or inflation
 * attack and is essentially a problem of slippage. Vault deployers can protect against this attack by making an initial
 * deposit of a non-trivial amount of the asset, such that price manipulation becomes infeasible. Withdrawals may
 * similarly be affected by slippage. Users can protect against this attack as well as unexpected slippage in general by
 * verifying the amount received is as expected, using a wrapper that performs these checks such as
 * https://github.com/fei-protocol/ERC4626#erc4626router-and-base[ERC4626Router].
 *
 * Since v4.9, this implementation uses virtual assets and shares to mitigate that risk. The `_decimalsOffset()`
 * corresponds to an offset in the decimal representation between the underlying asset's decimals and the vault
 * decimals. This offset also determines the rate of virtual shares to virtual assets in the vault, which itself
 * determines the initial exchange rate. While not fully preventing the attack, analysis shows that the default offset
 * (0) makes it non-profitable, as a result of the value being captured by the virtual shares (out of the attacker's
 * donation) matching the attacker's expected gains. With a larger offset, the attack becomes orders of magnitude more
 * expensive than it is profitable. More details about the underlying math can be found
 * xref:erc4626.adoc#inflation-attack[here].
 *
 * The drawback of this approach is that the virtual shares do capture (a very small) part of the value being accrued
 * to the vault. Also, if the vault experiences losses, the users try to exit the vault, the virtual shares and assets
 * will cause the first user to exit to experience reduced losses in detriment to the last users that will experience
 * bigger losses. Developers willing to revert back to the pre-v4.9 behavior just need to override the
 * `_convertToShares` and `_convertToAssets` functions.
 *
 * To learn more, check out our xref:ROOT:erc4626.adoc[ERC-4626 guide].
 * ====
 */
abstract contract ERC4626 is ERC20, IERC4626 {
    using Math for uint256;

    IERC20 private immutable _asset;
    uint8 private immutable _underlyingDecimals;

    /**
     * @dev Attempted to deposit more assets than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxDeposit(address receiver, uint256 assets, uint256 max);

    /**
     * @dev Attempted to mint more shares than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxMint(address receiver, uint256 shares, uint256 max);

    /**
     * @dev Attempted to withdraw more assets than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxWithdraw(address owner, uint256 assets, uint256 max);

    /**
     * @dev Attempted to redeem more shares than the max amount for `receiver`.
     */
    error ERC4626ExceededMaxRedeem(address owner, uint256 shares, uint256 max);

    /**
     * @dev Set the underlying asset contract. This must be an ERC20-compatible contract (ERC20 or ERC777).
     */
    constructor(IERC20 asset_) {
        (bool success, uint8 assetDecimals) = _tryGetAssetDecimals(asset_);
        _underlyingDecimals = success ? assetDecimals : 18;
        _asset = asset_;
    }

    /**
     * @dev Attempts to fetch the asset decimals. A return value of false indicates that the attempt failed in some way.
     */
    function _tryGetAssetDecimals(IERC20 asset_) private view returns (bool, uint8) {
        (bool success, bytes memory encodedDecimals) = address(asset_).staticcall(
            abi.encodeCall(IERC20Metadata.decimals, ())
        );
        if (success && encodedDecimals.length >= 32) {
            uint256 returnedDecimals = abi.decode(encodedDecimals, (uint256));
            if (returnedDecimals <= type(uint8).max) {
                return (true, uint8(returnedDecimals));
            }
        }
        return (false, 0);
    }

    /**
     * @dev Decimals are computed by adding the decimal offset on top of the underlying asset's decimals. This
     * "original" value is cached during construction of the vault contract. If this read operation fails (e.g., the
     * asset has not been created yet), a default of 18 is used to represent the underlying asset's decimals.
     *
     * See {IERC20Metadata-decimals}.
     */
    function decimals() public view virtual override(IERC20Metadata, ERC20) returns (uint8) {
        return _underlyingDecimals + _decimalsOffset();
    }

    /** @dev See {IERC4626-asset}. */
    function asset() public view virtual returns (address) {
        return address(_asset);
    }

    /** @dev See {IERC4626-totalAssets}. */
    function totalAssets() public view virtual returns (uint256) {
        return _asset.balanceOf(address(this));
    }

    /** @dev See {IERC4626-convertToShares}. */
    function convertToShares(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-convertToAssets}. */
    function convertToAssets(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-maxDeposit}. */
    function maxDeposit(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /** @dev See {IERC4626-maxMint}. */
    function maxMint(address) public view virtual returns (uint256) {
        return type(uint256).max;
    }

    /** @dev See {IERC4626-maxWithdraw}. */
    function maxWithdraw(address owner) public view virtual returns (uint256) {
        return _convertToAssets(balanceOf(owner), Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-maxRedeem}. */
    function maxRedeem(address owner) public view virtual returns (uint256) {
        return balanceOf(owner);
    }

    /** @dev See {IERC4626-previewDeposit}. */
    function previewDeposit(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-previewMint}. */
    function previewMint(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Ceil);
    }

    /** @dev See {IERC4626-previewWithdraw}. */
    function previewWithdraw(uint256 assets) public view virtual returns (uint256) {
        return _convertToShares(assets, Math.Rounding.Ceil);
    }

    /** @dev See {IERC4626-previewRedeem}. */
    function previewRedeem(uint256 shares) public view virtual returns (uint256) {
        return _convertToAssets(shares, Math.Rounding.Floor);
    }

    /** @dev See {IERC4626-deposit}. */
    function deposit(uint256 assets, address receiver) public virtual returns (uint256) {
        uint256 maxAssets = maxDeposit(receiver);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxDeposit(receiver, assets, maxAssets);
        }

        uint256 shares = previewDeposit(assets);
        _deposit(_msgSender(), receiver, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-mint}.
     *
     * As opposed to {deposit}, minting is allowed even if the vault is in a state where the price of a share is zero.
     * In this case, the shares will be minted without requiring any assets to be deposited.
     */
    function mint(uint256 shares, address receiver) public virtual returns (uint256) {
        uint256 maxShares = maxMint(receiver);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxMint(receiver, shares, maxShares);
        }

        uint256 assets = previewMint(shares);
        _deposit(_msgSender(), receiver, assets, shares);

        return assets;
    }

    /** @dev See {IERC4626-withdraw}. */
    function withdraw(uint256 assets, address receiver, address owner) public virtual returns (uint256) {
        uint256 maxAssets = maxWithdraw(owner);
        if (assets > maxAssets) {
            revert ERC4626ExceededMaxWithdraw(owner, assets, maxAssets);
        }

        uint256 shares = previewWithdraw(assets);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return shares;
    }

    /** @dev See {IERC4626-redeem}. */
    function redeem(uint256 shares, address receiver, address owner) public virtual returns (uint256) {
        uint256 maxShares = maxRedeem(owner);
        if (shares > maxShares) {
            revert ERC4626ExceededMaxRedeem(owner, shares, maxShares);
        }

        uint256 assets = previewRedeem(shares);
        _withdraw(_msgSender(), receiver, owner, assets, shares);

        return assets;
    }

    /**
     * @dev Internal conversion function (from assets to shares) with support for rounding direction.
     */
    function _convertToShares(uint256 assets, Math.Rounding rounding) internal view virtual returns (uint256) {
        return assets.mulDiv(totalSupply() + 10 ** _decimalsOffset(), totalAssets() + 1, rounding);
    }

    /**
     * @dev Internal conversion function (from shares to assets) with support for rounding direction.
     */
    function _convertToAssets(uint256 shares, Math.Rounding rounding) internal view virtual returns (uint256) {
        return shares.mulDiv(totalAssets() + 1, totalSupply() + 10 ** _decimalsOffset(), rounding);
    }

    /**
     * @dev Deposit/mint common workflow.
     */
    function _deposit(address caller, address receiver, uint256 assets, uint256 shares) internal virtual {
        // If _asset is ERC777, `transferFrom` can trigger a reentrancy BEFORE the transfer happens through the
        // `tokensToSend` hook. On the other hand, the `tokenReceived` hook, that is triggered after the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer before we mint so that any reentrancy would happen before the
        // assets are transferred and before the shares are minted, which is a valid state.
        // slither-disable-next-line reentrancy-no-eth
        SafeERC20.safeTransferFrom(_asset, caller, address(this), assets);
        _mint(receiver, shares);

        emit Deposit(caller, receiver, assets, shares);
    }

    /**
     * @dev Withdraw/redeem common workflow.
     */
    function _withdraw(
        address caller,
        address receiver,
        address owner,
        uint256 assets,
        uint256 shares
    ) internal virtual {
        if (caller != owner) {
            _spendAllowance(owner, caller, shares);
        }

        // If _asset is ERC777, `transfer` can trigger a reentrancy AFTER the transfer happens through the
        // `tokensReceived` hook. On the other hand, the `tokensToSend` hook, that is triggered before the transfer,
        // calls the vault, which is assumed not malicious.
        //
        // Conclusion: we need to do the transfer after the burn so that any reentrancy would happen after the
        // shares are burned and after the assets are transferred, which is a valid state.
        _burn(owner, shares);
        SafeERC20.safeTransfer(_asset, receiver, assets);

        emit Withdraw(caller, receiver, owner, assets, shares);
    }

    function _decimalsOffset() internal view virtual returns (uint8) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";
import {IERC20Permit} from "../extensions/IERC20Permit.sol";
import {Address} from "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev An operation with an ERC20 token failed.
     */
    error SafeERC20FailedOperation(address token);

    /**
     * @dev Indicates a failed `decreaseAllowance` request.
     */
    error SafeERC20FailedDecreaseAllowance(address spender, uint256 currentAllowance, uint256 requestedDecrease);

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transfer, (to, value)));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeCall(token.transferFrom, (from, to, value)));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        forceApprove(token, spender, oldAllowance + value);
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `requestedDecrease`. If `token` returns no
     * value, non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 requestedDecrease) internal {
        unchecked {
            uint256 currentAllowance = token.allowance(address(this), spender);
            if (currentAllowance < requestedDecrease) {
                revert SafeERC20FailedDecreaseAllowance(spender, currentAllowance, requestedDecrease);
            }
            forceApprove(token, spender, currentAllowance - requestedDecrease);
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeCall(token.approve, (spender, value));

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeCall(token.approve, (spender, 0)));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data);
        if (returndata.length != 0 && !abi.decode(returndata, (bool))) {
            revert SafeERC20FailedOperation(address(token));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return success && (returndata.length == 0 || abi.decode(returndata, (bool))) && address(token).code.length > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/Address.sol)

pragma solidity ^0.8.20;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev The ETH balance of the account is not enough to perform the operation.
     */
    error AddressInsufficientBalance(address account);

    /**
     * @dev There's no code at `target` (it is not a contract).
     */
    error AddressEmptyCode(address target);

    /**
     * @dev A call to an address target failed. The target may have reverted.
     */
    error FailedInnerCall();

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.20/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        if (address(this).balance < amount) {
            revert AddressInsufficientBalance(address(this));
        }

        (bool success, ) = recipient.call{value: amount}("");
        if (!success) {
            revert FailedInnerCall();
        }
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason or custom error, it is bubbled
     * up by this function (like regular Solidity function calls). However, if
     * the call reverted with no returned reason, this function reverts with a
     * {FailedInnerCall} error.
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        if (address(this).balance < value) {
            revert AddressInsufficientBalance(address(this));
        }
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and reverts if the target
     * was not a contract or bubbling up the revert reason (falling back to {FailedInnerCall}) in case of an
     * unsuccessful call.
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata
    ) internal view returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            // only check if target is a contract if the call was successful and the return data is empty
            // otherwise we already know that it was a contract
            if (returndata.length == 0 && target.code.length == 0) {
                revert AddressEmptyCode(target);
            }
            return returndata;
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and reverts if it wasn't, either by bubbling the
     * revert reason or with a default {FailedInnerCall} error.
     */
    function verifyCallResult(bool success, bytes memory returndata) internal pure returns (bytes memory) {
        if (!success) {
            _revert(returndata);
        } else {
            return returndata;
        }
    }

    /**
     * @dev Reverts with returndata if present. Otherwise reverts with {FailedInnerCall}.
     */
    function _revert(bytes memory returndata) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert FailedInnerCall();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

enum YieldMode {
    AUTOMATIC,
    VOID,
    CLAIMABLE
}

enum GasMode {
    VOID,
    CLAIMABLE
}

interface IBlast {
    // configure
    function configureContract(address contractAddress, YieldMode _yield, GasMode gasMode, address governor) external;

    function configure(YieldMode _yield, GasMode gasMode, address governor) external;

    // base configuration options
    function configureClaimableYield() external;

    function configureClaimableYieldOnBehalf(address contractAddress) external;

    function configureAutomaticYield() external;

    function configureAutomaticYieldOnBehalf(address contractAddress) external;

    function configureVoidYield() external;

    function configureVoidYieldOnBehalf(address contractAddress) external;

    function configureClaimableGas() external;

    function configureClaimableGasOnBehalf(address contractAddress) external;

    function configureVoidGas() external;

    function configureVoidGasOnBehalf(address contractAddress) external;

    function configureGovernor(address _governor) external;

    function configureGovernorOnBehalf(address _newGovernor, address contractAddress) external;

    // claim yield
    function claimYield(address contractAddress, address recipientOfYield, uint256 amount) external returns (uint256);

    function claimAllYield(address contractAddress, address recipientOfYield) external returns (uint256);

    // claim gas
    function claimAllGas(address contractAddress, address recipientOfGas) external returns (uint256);

    function claimGasAtMinClaimRate(
        address contractAddress,
        address recipientOfGas,
        uint256 minClaimRateBips
    ) external returns (uint256);

    function claimMaxGas(address contractAddress, address recipientOfGas) external returns (uint256);

    function claimGas(
        address contractAddress,
        address recipientOfGas,
        uint256 gasToClaim,
        uint256 gasSecondsToConsume
    ) external returns (uint256);

    // read functions
    function readClaimableYield(address contractAddress) external view returns (uint256);

    function readYieldConfiguration(address contractAddress) external view returns (uint8);

    function readGasParams(
        address contractAddress
    ) external view returns (uint256 etherSeconds, uint256 etherBalance, uint256 lastUpdated, GasMode);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

interface IBlastPoints {
    function configurePointsOperator(address operator) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.24;

enum YieldMode {
    AUTOMATIC,
    VOID,
    CLAIMABLE
}

interface IERC20Rebasing {
    // changes the yield mode of the caller and update the balance
    // to reflect the configuration
    function configure(YieldMode) external returns (uint256);

    // "claimable" yield mode accounts can call this this claim their yield
    // to another address
    function claim(address recipient, uint256 amount) external returns (uint256);

    // read the claimable amount for an account
    function getClaimableAmount(address account) external view returns (uint256);
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.24;

interface ILiquidityPool {
    event PayoutTransferred(address game, address receiver, address currency, uint256 amount);
    event InsufficientFundsForPayout(address game, address receiver, address currency, uint256 shortfall);
    event ProtocolFeeTransferred(address game, address protocolFeeRecipient, address currency, uint256 amount);

    error LiquidityPool__NotAuthorized();
    error LiquidityPool__UnsupportedOperation();

    /**
     * @notice Returns the liquidity pool router contract address
     */
    function LIQUIDITY_POOL_ROUTER() external view returns (address);

    /**
     * @notice Transfer payout to the player, only the game configuration manager can call this function
     * @param game Game contract address
     * @param amount Amount to transfer
     * @param receiver Prize receiver
     */
    function transferPayoutToPlayer(address game, uint256 amount, address receiver) external;

    /**
     * @notice Transfer protocol fee, only the game configuration manager can call this function
     * @param game Game contract address
     * @param amount Amount to transfer
     * @param protocolFeeRecipient Protocol fee recipient
     */
    function transferProtocolFee(address game, uint256 amount, address protocolFeeRecipient) external;
}

// SPDX-License-Identifier: MIT

pragma solidity 0.8.24;

import {OwnableTwoSteps} from "@looksrare/contracts-libs/contracts/OwnableTwoSteps.sol";
import {ReentrancyGuard} from "@looksrare/contracts-libs/contracts/ReentrancyGuard.sol";
import {Pausable} from "@looksrare/contracts-libs/contracts/Pausable.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {ERC20} from "@openzeppelin/contracts/token/ERC20/ERC20.sol";
import {ERC4626} from "@openzeppelin/contracts/token/ERC20/extensions/ERC4626.sol";

import {ILiquidityPool} from "./interfaces/ILiquidityPool.sol";
import {IBlast, YieldMode, GasMode} from "./interfaces/IBlast.sol";
import {IBlastPoints} from "./interfaces/IBlastPoints.sol";
import {IERC20Rebasing} from "./interfaces/IERC20Rebasing.sol";

import {LowLevelERC20Transfer} from "@looksrare/contracts-libs/contracts/lowLevelCallers/LowLevelERC20Transfer.sol";

/**
 * @title LiquidityPool
 * @notice This contract allows depositors to act as the counterparty of players of our games.
 * @author YOLO Games protocol team
 */
abstract contract LiquidityPool is
    ERC4626,
    OwnableTwoSteps,
    ReentrancyGuard,
    Pausable,
    ILiquidityPool,
    LowLevelERC20Transfer
{
    /**
     * @notice Liquidity manager contract address
     */
    address public immutable GAME_CONFIGURATION_MANAGER;

    /**
     * @notice Liquidity pool router contract address
     */
    address public immutable LIQUIDITY_POOL_ROUTER;

    /**
     * @param _name Vault share name
     * @param _symbol Vault share symbol
     * @param _owner Owner of the contract
     * @param _asset Vault asset contract address
     * @param _gameConfigurationManager Liquidity manager contract address
     * @param _liquidityPoolRouter Liquidity pool router contract address
     * @param _blast Blast precompile
     * @param _blastPoints Blast points
     * @param _blastPointsOperator Blast points operator
     */
    constructor(
        string memory _name,
        string memory _symbol,
        address _owner,
        address _asset,
        address _gameConfigurationManager,
        address _liquidityPoolRouter,
        address _blast,
        address _blastPoints,
        address _blastPointsOperator
    ) ERC20(_name, _symbol) ERC4626(IERC20(_asset)) OwnableTwoSteps(_owner) {
        GAME_CONFIGURATION_MANAGER = _gameConfigurationManager;
        LIQUIDITY_POOL_ROUTER = _liquidityPoolRouter;

        IBlast(_blast).configure(YieldMode.CLAIMABLE, GasMode.CLAIMABLE, _owner);
        IBlastPoints(_blastPoints).configurePointsOperator(_blastPointsOperator);
    }

    /**
     * @inheritdoc ERC4626
     */
    function deposit(uint256 assets, address receiver) public override returns (uint256) {
        _onlyLiquidityPoolRouter();
        return super.deposit(assets, receiver);
    }

    /**
     * @inheritdoc ERC4626
     */
    function redeem(uint256 shares, address receiver, address owner) public override returns (uint256) {
        _onlyLiquidityPoolRouter();
        return super.redeem(shares, receiver, owner);
    }

    /**
     * @notice Mint is not supported by this contract
     */
    function mint(uint256, address) public pure override returns (uint256) {
        revert LiquidityPool__UnsupportedOperation();
    }

    /**
     * @notice Withdraw is not supported by this contract
     */
    function withdraw(uint256, address, address) public pure override returns (uint256) {
        revert LiquidityPool__UnsupportedOperation();
    }

    /**
     * @notice Toggle paused state. Only callable by contract owner.
     */
    function togglePaused() external onlyOwner {
        paused() ? _unpause() : _pause();
    }

    /**
     * @notice Claim Blast yield. Only callable by contract owner.
     * @param receiver Receiver of the yield
     */
    function claimYield(address receiver) external onlyOwner {
        IERC20Rebasing rebasingAsset = IERC20Rebasing(asset());
        uint256 claimableAmount = rebasingAsset.getClaimableAmount(address(this));
        if (claimableAmount != 0) {
            rebasingAsset.claim(receiver, claimableAmount);
        }
    }

    function _decimalsOffset() internal pure override returns (uint8) {
        return 6;
    }

    function _onlyGameConfigurationManager() internal view {
        if (msg.sender != GAME_CONFIGURATION_MANAGER) {
            revert LiquidityPool__NotAuthorized();
        }
    }

    function _onlyLiquidityPoolRouter() internal view {
        if (msg.sender != LIQUIDITY_POOL_ROUTER) {
            revert LiquidityPool__NotAuthorized();
        }
    }
}

{
  "viaIR": true,
  "optimizer": {
    "enabled": true,
    "runs": 888888
  },
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_owner","type":"address"},{"internalType":"address","name":"_weth","type":"address"},{"internalType":"address","name":"_gameConfigurationManager","type":"address"},{"internalType":"address","name":"_liquidityPoolRouter","type":"address"},{"internalType":"address","name":"_blast","type":"address"},{"internalType":"address","name":"_blastPoints","type":"address"},{"internalType":"address","name":"_blastPointsOperator","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"target","type":"address"}],"name":"AddressEmptyCode","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"AddressInsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"allowance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientAllowance","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"},{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"needed","type":"uint256"}],"name":"ERC20InsufficientBalance","type":"error"},{"inputs":[{"internalType":"address","name":"approver","type":"address"}],"name":"ERC20InvalidApprover","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"ERC20InvalidReceiver","type":"error"},{"inputs":[{"internalType":"address","name":"sender","type":"address"}],"name":"ERC20InvalidSender","type":"error"},{"inputs":[{"internalType":"address","name":"spender","type":"address"}],"name":"ERC20InvalidSpender","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxDeposit","type":"error"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxMint","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxRedeem","type":"error"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"uint256","name":"max","type":"uint256"}],"name":"ERC4626ExceededMaxWithdraw","type":"error"},{"inputs":[],"name":"FailedInnerCall","type":"error"},{"inputs":[],"name":"IsPaused","type":"error"},{"inputs":[],"name":"LiquidityPool__NotAuthorized","type":"error"},{"inputs":[],"name":"LiquidityPool__UnsupportedOperation","type":"error"},{"inputs":[],"name":"MathOverflowedMulDiv","type":"error"},{"inputs":[],"name":"NoOngoingTransferInProgress","type":"error"},{"inputs":[],"name":"NotOwner","type":"error"},{"inputs":[],"name":"NotPaused","type":"error"},{"inputs":[],"name":"ReentrancyFail","type":"error"},{"inputs":[],"name":"RenouncementNotInProgress","type":"error"},{"inputs":[{"internalType":"address","name":"token","type":"address"}],"name":"SafeERC20FailedOperation","type":"error"},{"inputs":[],"name":"TransferAlreadyInProgress","type":"error"},{"inputs":[],"name":"TransferNotInProgress","type":"error"},{"inputs":[],"name":"WrongPotentialOwner","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":true,"internalType":"address","name":"spender","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Approval","type":"event"},{"anonymous":false,"inputs":[],"name":"CancelOwnershipTransfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[],"name":"InitiateOwnershipRenouncement","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":false,"internalType":"address","name":"potentialOwner","type":"address"}],"name":"InitiateOwnershipTransfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"game","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"address","name":"currency","type":"address"},{"indexed":false,"internalType":"uint256","name":"shortfall","type":"uint256"}],"name":"InsufficientFundsForPayout","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"newOwner","type":"address"}],"name":"NewOwner","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Paused","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"game","type":"address"},{"indexed":false,"internalType":"address","name":"receiver","type":"address"},{"indexed":false,"internalType":"address","name":"currency","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"PayoutTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"game","type":"address"},{"indexed":false,"internalType":"address","name":"protocolFeeRecipient","type":"address"},{"indexed":false,"internalType":"address","name":"currency","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"ProtocolFeeTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"from","type":"address"},{"indexed":true,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"uint256","name":"value","type":"uint256"}],"name":"Transfer","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"account","type":"address"}],"name":"Unpaused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"sender","type":"address"},{"indexed":true,"internalType":"address","name":"receiver","type":"address"},{"indexed":true,"internalType":"address","name":"owner","type":"address"},{"indexed":false,"internalType":"uint256","name":"assets","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"shares","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[],"name":"GAME_CONFIGURATION_MANAGER","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"LIQUIDITY_POOL_ROUTER","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"spender","type":"address"}],"name":"allowance","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"spender","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"approve","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"asset","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"cancelOwnershipTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"receiver","type":"address"}],"name":"claimYield","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"confirmOwnershipRenouncement","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"confirmOwnershipTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"convertToAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"convertToShares","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"decimals","outputs":[{"internalType":"uint8","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"}],"name":"deposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"initiateOwnershipRenouncement","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newPotentialOwner","type":"address"}],"name":"initiateOwnershipTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"maxDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"maxMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"maxRedeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"owner","type":"address"}],"name":"maxWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"mint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"name","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"ownershipStatus","outputs":[{"internalType":"enum IOwnableTwoSteps.Status","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"paused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"potentialOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"previewDeposit","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewMint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"}],"name":"previewRedeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"assets","type":"uint256"}],"name":"previewWithdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"shares","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"name":"redeem","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"symbol","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"togglePaused","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"totalAssets","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transfer","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"from","type":"address"},{"internalType":"address","name":"to","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"transferFrom","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"game","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"receiver","type":"address"}],"name":"transferPayoutToPlayer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"game","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"protocolFeeRecipient","type":"address"}],"name":"transferProtocolFee","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"withdraw","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"pure","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

0000000000000000000000002c64e6ee1dd9fc2a0db6a6b1aa2c3f163c7a2c780000000000000000000000004300000000000000000000000000000000000004000000000000000000000000572a1fa9e45c2ec681aba11b9fdb829a5ba9e50d0000000000000000000000004d90cc30b9e75679d3cf89b011053946dfe8763b00000000000000000000000043000000000000000000000000000000000000020000000000000000000000002536fe9ab3f511540f2f9e2ec2a805005c3dd8000000000000000000000000004066b9bd584b5fa88897194dabe3a37883ac35f7

-----Decoded View---------------
Arg [0] : _owner (address): 0x2C64e6Ee1Dd9Fc2a0Db6a6B1aa2c3f163C7A2C78
Arg [1] : _weth (address): 0x4300000000000000000000000000000000000004
Arg [2] : _gameConfigurationManager (address): 0x572a1FA9e45c2ec681ABa11B9Fdb829A5Ba9E50d
Arg [3] : _liquidityPoolRouter (address): 0x4d90cc30B9E75679d3Cf89B011053946DfE8763b
Arg [4] : _blast (address): 0x4300000000000000000000000000000000000002
Arg [5] : _blastPoints (address): 0x2536FE9ab3F511540F2f9e2eC2A805005C3Dd800
Arg [6] : _blastPointsOperator (address): 0x4066b9BD584b5FA88897194dAbE3a37883AC35F7

-----Encoded View---------------
7 Constructor Arguments found :
Arg [0] : 0000000000000000000000002c64e6ee1dd9fc2a0db6a6b1aa2c3f163c7a2c78
Arg [1] : 0000000000000000000000004300000000000000000000000000000000000004
Arg [2] : 000000000000000000000000572a1fa9e45c2ec681aba11b9fdb829a5ba9e50d
Arg [3] : 0000000000000000000000004d90cc30b9e75679d3cf89b011053946dfe8763b
Arg [4] : 0000000000000000000000004300000000000000000000000000000000000002
Arg [5] : 0000000000000000000000002536fe9ab3f511540f2f9e2ec2a805005c3dd800
Arg [6] : 0000000000000000000000004066b9bd584b5fa88897194dabe3a37883ac35f7