// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

import { ISuperformFactory } from "src/interfaces/ISuperformFactory.sol";
import { Broadcastable } from "src/crosschain-data/utils/Broadcastable.sol";
import { BaseForm } from "src/BaseForm.sol";
import { BroadcastMessage } from "src/types/DataTypes.sol";
import { IBaseForm } from "src/interfaces/IBaseForm.sol";
import { ISuperRBAC } from "src/interfaces/ISuperRBAC.sol";
import { ISuperRegistry } from "src/interfaces/ISuperRegistry.sol";
import { DataLib } from "src/libraries/DataLib.sol";
import { Error } from "src/libraries/Error.sol";
import { ERC165Checker } from "openzeppelin-contracts/contracts/utils/introspection/ERC165Checker.sol";
import { IERC4626 } from "openzeppelin-contracts/contracts/interfaces/IERC4626.sol";
import { Clones } from "openzeppelin-contracts/contracts/proxy/Clones.sol";

/// @title SuperformFactory
/// @dev Central point of read & write access for all Superforms on this chain
/// @author Zeropoint Labs
contract SuperformFactory is ISuperformFactory, Broadcastable {
    using DataLib for uint256;
    using Clones for address;

    //////////////////////////////////////////////////////////////
    //                         CONSTANTS                        //
    //////////////////////////////////////////////////////////////

    ISuperRegistry public immutable superRegistry;
    uint64 public immutable CHAIN_ID;
    bytes32 constant SYNC_IMPLEMENTATION_STATUS = keccak256("SYNC_IMPLEMENTATION_STATUS");

    //////////////////////////////////////////////////////////////
    //                     STATE VARIABLES                      //
    //////////////////////////////////////////////////////////////

    uint256 public xChainPayloadCounter;

    /// @dev all form implementation addresses
    address[] public formImplementations;

    /// @dev all superform ids
    uint256[] public superforms;
    mapping(uint256 superformId => bool superformIdExists) public isSuperform;

    /// @notice If formImplementationId is 0, formImplementation is not part of the protocol
    mapping(uint32 formImplementationId => address formImplementationAddress) public formImplementation;

    /// @dev each form implementation address can correspond only to a single formImplementationId
    mapping(address formImplementationAddress => uint32 formImplementationId) public formImplementationIds;
    /// @dev this mapping is used only for crosschain cases and should be same across all the chains
    mapping(uint32 formImplementationId => uint8 formRegistryId) public formStateRegistryId;

    mapping(uint32 formImplementationId => PauseStatus) public formImplementationPaused;

    mapping(address vault => uint256[] superformIds) public vaultToSuperforms;

    mapping(address vault => uint256[] formImplementationId) public vaultToFormImplementationId;

    mapping(bytes32 vaultFormImplementationCombination => uint256 superformIds) public
        vaultFormImplCombinationToSuperforms;

    //////////////////////////////////////////////////////////////
    //                       MODIFIERS                          //
    //////////////////////////////////////////////////////////////

    modifier onlyEmergencyAdmin() {
        if (!ISuperRBAC(superRegistry.getAddress(keccak256("SUPER_RBAC"))).hasEmergencyAdminRole(msg.sender)) {
            revert Error.NOT_EMERGENCY_ADMIN();
        }
        _;
    }

    modifier onlyProtocolAdmin() {
        if (!ISuperRBAC(superRegistry.getAddress(keccak256("SUPER_RBAC"))).hasProtocolAdminRole(msg.sender)) {
            revert Error.NOT_PROTOCOL_ADMIN();
        }
        _;
    }

    modifier onlyBroadcastRegistry() {
        /// @dev this function is only accessible through broadcast registry
        if (msg.sender != superRegistry.getAddress(keccak256("BROADCAST_REGISTRY"))) {
            revert Error.NOT_BROADCAST_REGISTRY();
        }
        _;
    }

    //////////////////////////////////////////////////////////////
    //                      CONSTRUCTOR                         //
    //////////////////////////////////////////////////////////////

    /// @param superRegistry_ the superform registry contract
    constructor(address superRegistry_) {
        if (superRegistry_ == address(0)) {
            revert Error.ZERO_ADDRESS();
        }

        if (block.chainid > type(uint64).max) {
            revert Error.BLOCK_CHAIN_ID_OUT_OF_BOUNDS();
        }

        CHAIN_ID = uint64(block.chainid);
        superRegistry = ISuperRegistry(superRegistry_);
    }

    //////////////////////////////////////////////////////////////
    //              EXTERNAL VIEW FUNCTIONS                     //
    //////////////////////////////////////////////////////////////

    /// @inheritdoc ISuperformFactory
    function getFormCount() external view override returns (uint256 forms_) {
        forms_ = formImplementations.length;
    }

    /// @inheritdoc ISuperformFactory
    function getSuperformCount() external view override returns (uint256 superforms_) {
        superforms_ = superforms.length;
    }

    /// @inheritdoc ISuperformFactory
    function getFormImplementation(uint32 formImplementationId_) external view override returns (address) {
        return formImplementation[formImplementationId_];
    }

    /// @inheritdoc ISuperformFactory
    function getFormStateRegistryId(uint32 formImplementationId_)
        external
        view
        override
        returns (uint8 formStateRegistryId_)
    {
        formStateRegistryId_ = formStateRegistryId[formImplementationId_];
        if (formStateRegistryId_ == 0) revert Error.INVALID_FORM_REGISTRY_ID();
    }

    /// @inheritdoc ISuperformFactory
    function isFormImplementationPaused(uint32 formImplementationId_) external view override returns (bool) {
        return formImplementationPaused[formImplementationId_] == PauseStatus.PAUSED;
    }

    /// @inheritdoc ISuperformFactory
    function getSuperform(uint256 superformId_)
        external
        pure
        override
        returns (address superform_, uint32 formImplementationId_, uint64 chainId_)
    {
        (superform_, formImplementationId_, chainId_) = superformId_.getSuperform();
    }

    /// @inheritdoc ISuperformFactory
    function getAllSuperformsFromVault(address vault_)
        external
        view
        override
        returns (uint256[] memory superformIds_, address[] memory superforms_)
    {
        superformIds_ = vaultToSuperforms[vault_];
        uint256 len = superformIds_.length;
        superforms_ = new address[](len);

        for (uint256 i; i < len; ++i) {
            (superforms_[i],,) = superformIds_[i].getSuperform();
        }
    }

    //////////////////////////////////////////////////////////////
    //              EXTERNAL WRITE FUNCTIONS                    //
    //////////////////////////////////////////////////////////////

    /// @inheritdoc ISuperformFactory
    function addFormImplementation(
        address formImplementation_,
        uint32 formImplementationId_,
        uint8 formStateRegistryId_
    )
        public
        override
        onlyProtocolAdmin
    {
        if (formImplementation_ == address(0)) revert Error.ZERO_ADDRESS();

        if (!ERC165Checker.supportsERC165(formImplementation_)) revert Error.ERC165_UNSUPPORTED();
        if (formImplementation[formImplementationId_] != address(0)) {
            revert Error.FORM_IMPLEMENTATION_ALREADY_EXISTS();
        }
        if (formImplementationIds[formImplementation_] != 0) {
            revert Error.FORM_IMPLEMENTATION_ID_ALREADY_EXISTS();
        }
        if (!ERC165Checker.supportsInterface(formImplementation_, type(IBaseForm).interfaceId)) {
            revert Error.FORM_INTERFACE_UNSUPPORTED();
        }

        /// @dev save the newly added address in the mapping and array registry
        formImplementation[formImplementationId_] = formImplementation_;
        formImplementationIds[formImplementation_] = formImplementationId_;

        /// @dev set CoreStateRegistry if the form implementation needs no special state registry
        /// @dev if the form needs any special state registry, set this value to the id of the special state registry
        /// and core state registry can be used by default.
        /// @dev if this value is != 1, then the form supports two state registries (CoreStateRegistry + its special
        /// state registry)
        if (formStateRegistryId_ == 0) {
            revert Error.INVALID_FORM_REGISTRY_ID();
        }

        formStateRegistryId[formImplementationId_] = formStateRegistryId_;
        formImplementations.push(formImplementation_);

        emit FormImplementationAdded(formImplementation_, formImplementationId_, formStateRegistryId_);
    }

    /// @inheritdoc ISuperformFactory
    function createSuperform(
        uint32 formImplementationId_,
        address vault_
    )
        public
        override
        returns (uint256 superformId_, address superform_)
    {
        if (vault_ == address(0)) revert Error.ZERO_ADDRESS();

        address tFormImplementation = formImplementation[formImplementationId_];
        if (tFormImplementation == address(0)) revert Error.FORM_DOES_NOT_EXIST();

        /// @dev Same vault and implementation can be used only once to create superform
        bytes32 vaultFormImplementationCombination = keccak256(abi.encode(tFormImplementation, vault_));
        if (vaultFormImplCombinationToSuperforms[vaultFormImplementationCombination] != 0) {
            revert Error.VAULT_FORM_IMPLEMENTATION_COMBINATION_EXISTS();
        }

        /// @dev instantiate the superform
        superform_ = tFormImplementation.cloneDeterministic(
            keccak256(abi.encode(uint256(CHAIN_ID), formImplementationId_, vault_))
        );

        BaseForm(payable(superform_)).initialize(address(superRegistry), vault_, address(IERC4626(vault_).asset()));

        /// @dev this will always be unique because all chainIds are unique
        superformId_ = DataLib.packSuperform(superform_, formImplementationId_, CHAIN_ID);

        vaultToSuperforms[vault_].push(superformId_);

        /// @dev map vaults to formImplementationId
        vaultToFormImplementationId[vault_].push(formImplementationId_);

        vaultFormImplCombinationToSuperforms[vaultFormImplementationCombination] = superformId_;

        superforms.push(superformId_);
        isSuperform[superformId_] = true;

        emit SuperformCreated(formImplementationId_, vault_, superformId_, superform_);
    }

    /// @inheritdoc ISuperformFactory
    function changeFormImplementationPauseStatus(
        uint32 formImplementationId_,
        PauseStatus status_,
        bytes memory extraData_
    )
        external
        payable
        override
        onlyEmergencyAdmin
    {
        if (formImplementation[formImplementationId_] == address(0)) revert Error.INVALID_FORM_ID();
        formImplementationPaused[formImplementationId_] = status_;

        /// @dev broadcast the change in status to the other destination chains
        if (extraData_.length != 0) {
            BroadcastMessage memory factoryPayload = BroadcastMessage(
                "SUPERFORM_FACTORY",
                SYNC_IMPLEMENTATION_STATUS,
                abi.encode(CHAIN_ID, ++xChainPayloadCounter, formImplementationId_, status_)
            );

            _broadcast(
                superRegistry.getAddress(keccak256("BROADCAST_REGISTRY")),
                superRegistry.getAddress(keccak256("PAYMASTER")),
                abi.encode(factoryPayload),
                extraData_
            );
        } else if (msg.value != 0) {
            revert Error.MSG_VALUE_NOT_ZERO();
        }

        emit FormImplementationPaused(formImplementationId_, status_);
    }

    /// @inheritdoc ISuperformFactory
    function stateSyncBroadcast(bytes memory data_) external payable override onlyBroadcastRegistry {
        BroadcastMessage memory factoryPayload = abi.decode(data_, (BroadcastMessage));

        if (factoryPayload.messageType == SYNC_IMPLEMENTATION_STATUS) {
            _syncFormPausedStatus(factoryPayload.message);
        }
    }

    //////////////////////////////////////////////////////////////
    //                  INTERNAL FUNCTIONS                      //
    //////////////////////////////////////////////////////////////

    /// @dev synchronize paused status update message from remote chain
    /// @notice is a part of broadcasting / dispatching through factory state registry
    /// @param message_ is the crosschain message received.
    function _syncFormPausedStatus(bytes memory message_) internal {
        (,, uint32 formImplementationId, PauseStatus paused) =
            abi.decode(message_, (uint64, uint256, uint32, PauseStatus));

        if (formImplementation[formImplementationId] == address(0)) revert Error.INVALID_FORM_ID();
        formImplementationPaused[formImplementationId] = paused;

        emit FormImplementationPaused(formImplementationId, paused);
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

/// @title ISuperformFactory
/// @dev Interface for SuperformFactory
/// @author ZeroPoint Labs
interface ISuperformFactory {
    
    //////////////////////////////////////////////////////////////
    //                         CONSTANTS                        //
    //////////////////////////////////////////////////////////////

    enum PauseStatus {
        NON_PAUSED,
        PAUSED
    }

    //////////////////////////////////////////////////////////////
    //                          EVENTS                          //
    //////////////////////////////////////////////////////////////

    /// @dev emitted when a new formImplementation is entered into the factory
    /// @param formImplementation is the address of the new form implementation
    /// @param formImplementationId is the id of the formImplementation
    /// @param formStateRegistryId is any additional state registry id of the formImplementation
    event FormImplementationAdded(
        address indexed formImplementation, uint256 indexed formImplementationId, uint8 indexed formStateRegistryId
    );

    /// @dev emitted when a new Superform is created
    /// @param formImplementationId is the id of the form implementation
    /// @param vault is the address of the vault
    /// @param superformId is the id of the superform
    /// @param superform is the address of the superform
    event SuperformCreated(
        uint256 indexed formImplementationId, address indexed vault, uint256 indexed superformId, address superform
    );

    /// @dev emitted when a new SuperRegistry is set
    /// @param superRegistry is the address of the super registry
    event SuperRegistrySet(address indexed superRegistry);

    /// @dev emitted when a form implementation is paused
    /// @param formImplementationId is the id of the form implementation
    /// @param paused is the new paused status
    event FormImplementationPaused(uint256 indexed formImplementationId, PauseStatus indexed paused);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL VIEW FUNCTIONS                     //
    //////////////////////////////////////////////////////////////

    /// @dev returns the number of forms
    /// @return forms_ is the number of forms
    function getFormCount() external view returns (uint256 forms_);

    /// @dev returns the number of superforms
    /// @return superforms_ is the number of superforms
    function getSuperformCount() external view returns (uint256 superforms_);

    /// @dev returns the address of a form implementation
    /// @param formImplementationId_ is the id of the form implementation
    /// @return formImplementation_ is the address of the form implementation
    function getFormImplementation(uint32 formImplementationId_) external view returns (address formImplementation_);

    /// @dev returns the form state registry id of a form implementation
    /// @param formImplementationId_ is the id of the form implementation
    /// @return stateRegistryId_ is the additional state registry id of the form
    function getFormStateRegistryId(uint32 formImplementationId_) external view returns (uint8 stateRegistryId_);

    /// @dev returns the paused status of form implementation
    /// @param formImplementationId_ is the id of the form implementation
    /// @return paused_ is the current paused status of the form formImplementationId_
    function isFormImplementationPaused(uint32 formImplementationId_) external view returns (bool paused_);

    /// @dev returns the address of a superform
    /// @param superformId_ is the id of the superform
    /// @return superform_ is the address of the superform
    /// @return formImplementationId_ is the id of the form implementation
    /// @return chainId_ is the chain id
    function getSuperform(uint256 superformId_)
        external
        pure
        returns (address superform_, uint32 formImplementationId_, uint64 chainId_);

    /// @dev returns if an address has been added to a Form
    /// @param superformId_ is the id of the superform
    /// @return isSuperform_ bool if it exists
    function isSuperform(uint256 superformId_) external view returns (bool isSuperform_);

    /// @dev Reverse query of getSuperform, returns all superforms for a given vault
    /// @param vault_ is the address of a vault
    /// @return superformIds_ is the id of the superform
    /// @return superforms_ is the address of the superform
    function getAllSuperformsFromVault(address vault_)
        external
        view
        returns (uint256[] memory superformIds_, address[] memory superforms_);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL WRITE FUNCTIONS                    //
    //////////////////////////////////////////////////////////////

    /// @dev allows an admin to add a Form implementation to the factory
    /// @param formImplementation_ is the address of a form implementation
    /// @param formImplementationId_ is the id of the form implementation (generated off-chain and equal in all chains)
    /// @param formStateRegistryId_ is the id of any additional state registry for that form
    /// @dev formStateRegistryId_ 1 is default for all form implementations, pass in formStateRegistryId_ only if an
    /// additional state registry is required
    function addFormImplementation(
        address formImplementation_,
        uint32 formImplementationId_,
        uint8 formStateRegistryId_
    )
        external;

    /// @dev To add new vaults to Form implementations, fusing them together into Superforms
    /// @param formImplementationId_ is the form implementation we want to attach the vault to
    /// @param vault_ is the address of the vault
    /// @return superformId_ is the id of the created superform
    /// @return superform_ is the address of the created superform
    function createSuperform(
        uint32 formImplementationId_,
        address vault_
    )
        external
        returns (uint256 superformId_, address superform_);

    /// @dev to synchronize superforms added to different chains using broadcast registry
    /// @param data_ is the cross-chain superform id
    function stateSyncBroadcast(bytes memory data_) external payable;

    /// @dev allows an admin to change the status of a form
    /// @param formImplementationId_ is the id of the form implementation
    /// @param status_ is the new status
    /// @param extraData_ is optional & passed when broadcasting of status is needed
    function changeFormImplementationPauseStatus(
        uint32 formImplementationId_,
        PauseStatus status_,
        bytes memory extraData_
    )
        external
        payable;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

import { IBroadcastRegistry } from "src/interfaces/IBroadcastRegistry.sol";
import { Error } from "src/libraries/Error.sol";

/// @title Broadcastable
/// @dev Can be inherited in contracts that wish to support broadcasting
/// @author ZeroPoint Labs
abstract contract Broadcastable {
    //////////////////////////////////////////////////////////////
    //                  INTERNAL FUNCTIONS                      //
    //////////////////////////////////////////////////////////////

    /// @dev broadcasts state changes to all connected remote chains
    /// @param broadcastRegistry_ is the address of the broadcast registry contract.
    /// @param payMaster_ is the address of the paymaster contract.
    /// @param message_ is the crosschain message to be sent.
    /// @param extraData_ is the amb override information.
    function _broadcast(
        address broadcastRegistry_,
        address payMaster_,
        bytes memory message_,
        bytes memory extraData_
    )
        internal
    {
        (uint8 ambId, bytes memory broadcastParams) = abi.decode(extraData_, (uint8, bytes));

        /// @dev if the broadcastParams are wrong this will revert
        (uint256 gasFee, bytes memory extraData) = abi.decode(broadcastParams, (uint256, bytes));

        if (msg.value < gasFee) {
            revert Error.INVALID_BROADCAST_FEE();
        }

        /// @dev ambIds are validated inside the broadcast state registry
        IBroadcastRegistry(broadcastRegistry_).broadcastPayload{ value: gasFee }(
            msg.sender, ambId, gasFee, message_, extraData
        );

        if (msg.value > gasFee) {
            /// @dev forwards the rest to paymaster
            (bool success,) = payable(payMaster_).call{ value: msg.value - gasFee }("");

            if (!success) {
                revert Error.FAILED_TO_SEND_NATIVE();
            }
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

import { IBaseForm } from "src/interfaces/IBaseForm.sol";
import { ISuperRegistry } from "src/interfaces/ISuperRegistry.sol";
import { ISuperformFactory } from "src/interfaces/ISuperformFactory.sol";
import { IEmergencyQueue } from "src/interfaces/IEmergencyQueue.sol";
import { DataLib } from "src/libraries/DataLib.sol";
import { Error } from "src/libraries/Error.sol";
import { InitSingleVaultData } from "src/types/DataTypes.sol";
import { Initializable } from "openzeppelin-contracts/contracts/proxy/utils/Initializable.sol";
import { ERC165 } from "openzeppelin-contracts/contracts/utils/introspection/ERC165.sol";
import { IERC165 } from "openzeppelin-contracts/contracts/utils/introspection/IERC165.sol";

/// @title BaseForm
/// @dev Abstract contract to be inherited by different Form implementations
/// @author Zeropoint Labs
abstract contract BaseForm is IBaseForm, Initializable, ERC165 {

    using DataLib for uint256;

    //////////////////////////////////////////////////////////////
    //                         CONSTANTS                        //
    //////////////////////////////////////////////////////////////

    ISuperRegistry public immutable superRegistry;
    uint64 public immutable CHAIN_ID;

    //////////////////////////////////////////////////////////////
    //                     STATE VARIABLES                      //
    //////////////////////////////////////////////////////////////

    /// @dev the address of the vault that was added
    address public vault;

    /// @dev underlying asset of vault this form pertains to
    address public asset;

    //////////////////////////////////////////////////////////////
    //                       MODIFIERS                          //
    //////////////////////////////////////////////////////////////

    modifier notPaused(InitSingleVaultData memory singleVaultData_) {
        if (
            !ISuperformFactory(superRegistry.getAddress(keccak256("SUPERFORM_FACTORY"))).isSuperform(
                singleVaultData_.superformId
            )
        ) {
            revert Error.SUPERFORM_ID_NONEXISTENT();
        }

        (, uint32 formImplementationId_,) = singleVaultData_.superformId.getSuperform();

        if (
            ISuperformFactory(superRegistry.getAddress(keccak256("SUPERFORM_FACTORY"))).isFormImplementationPaused(
                formImplementationId_
            )
        ) revert Error.PAUSED();
        _;
    }

    modifier onlySuperRouter() {
        if (superRegistry.getAddress(keccak256("SUPERFORM_ROUTER")) != msg.sender) revert Error.NOT_SUPERFORM_ROUTER();
        _;
    }

    modifier onlyCoreStateRegistry() {
        if (superRegistry.getAddress(keccak256("CORE_STATE_REGISTRY")) != msg.sender) {
            revert Error.NOT_CORE_STATE_REGISTRY();
        }
        _;
    }

    modifier onlyEmergencyQueue() {
        if (msg.sender != superRegistry.getAddress(keccak256("EMERGENCY_QUEUE"))) {
            revert Error.NOT_EMERGENCY_QUEUE();
        }
        _;
    }

    //////////////////////////////////////////////////////////////
    //                      CONSTRUCTOR                         //
    //////////////////////////////////////////////////////////////

    constructor(address superRegistry_) {
        if (superRegistry_ == address(0)) {
            revert Error.ZERO_ADDRESS();
        }

        if (block.chainid > type(uint64).max) {
            revert Error.BLOCK_CHAIN_ID_OUT_OF_BOUNDS();
        }

        CHAIN_ID = uint64(block.chainid);
        superRegistry = ISuperRegistry(superRegistry_);

        _disableInitializers();
    }

    //////////////////////////////////////////////////////////////
    //              EXTERNAL VIEW FUNCTIONS                     //
    //////////////////////////////////////////////////////////////

    /// @inheritdoc IBaseForm
    function superformYieldTokenName() external view virtual override returns (string memory);

    /// @inheritdoc IBaseForm
    function superformYieldTokenSymbol() external view virtual override returns (string memory);

    /// @inheritdoc IBaseForm
    function getStateRegistryId() external view virtual override returns (uint8);

    // @inheritdoc IBaseForm
    function getVaultAddress() external view override returns (address) {
        return vault;
    }

    // @inheritdoc IBaseForm
    function getVaultAsset() public view override returns (address) {
        return asset;
    }

    /// @inheritdoc IBaseForm
    function getVaultName() public view virtual override returns (string memory);

    /// @inheritdoc IBaseForm
    function getVaultSymbol() public view virtual override returns (string memory);

    /// @inheritdoc IBaseForm
    function getVaultDecimals() public view virtual override returns (uint256);

    /// @inheritdoc IBaseForm
    function getPricePerVaultShare() public view virtual override returns (uint256);

    /// @inheritdoc IBaseForm
    function getVaultShareBalance() public view virtual override returns (uint256);

    /// @inheritdoc IBaseForm
    function getTotalAssets() public view virtual override returns (uint256);

    /// @inheritdoc IBaseForm
    function getTotalSupply() public view virtual override returns (uint256);

    // @inheritdoc IBaseForm
    function getPreviewPricePerVaultShare() public view virtual override returns (uint256);

    /// @inheritdoc IBaseForm
    function previewDepositTo(uint256 assets_) public view virtual override returns (uint256);

    /// @inheritdoc IBaseForm
    function previewWithdrawFrom(uint256 assets_) public view virtual override returns (uint256);

    /// @inheritdoc IBaseForm
    function previewRedeemFrom(uint256 shares_) public view virtual override returns (uint256);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL WRITE FUNCTIONS                    //
    //////////////////////////////////////////////////////////////

    /// @param superRegistry_  ISuperRegistry address deployed
    /// @param vault_ The vault address this form pertains to
    /// @param asset_ The underlying asset address of the vault this form pertains to
    function initialize(address superRegistry_, address vault_, address asset_) external initializer {
        if (ISuperRegistry(superRegistry_) != superRegistry) revert Error.NOT_SUPER_REGISTRY();
        if (vault_ == address(0) || asset_ == address(0)) revert Error.ZERO_ADDRESS();
        vault = vault_;
        asset = asset_;
    }

    /// @inheritdoc IBaseForm
    function directDepositIntoVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_
    )
        external
        payable
        override
        onlySuperRouter
        notPaused(singleVaultData_)
        returns (uint256 shares)
    {
        shares = _directDepositIntoVault(singleVaultData_, srcSender_);
    }

    /// @inheritdoc IBaseForm
    function directWithdrawFromVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_
    )
        external
        override
        onlySuperRouter
        returns (uint256 assets)
    {
        if (!_isPaused(singleVaultData_.superformId)) {
            assets = _directWithdrawFromVault(singleVaultData_, srcSender_);
        } else {
            IEmergencyQueue(superRegistry.getAddress(keccak256("EMERGENCY_QUEUE"))).queueWithdrawal(singleVaultData_);
        }
    }

    /// @inheritdoc IBaseForm
    function xChainDepositIntoVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_,
        uint64 srcChainId_
    )
        external
        override
        onlyCoreStateRegistry
        notPaused(singleVaultData_)
        returns (uint256 shares)
    {
        if (srcChainId_ != 0 && srcChainId_ != CHAIN_ID) {
            shares = _xChainDepositIntoVault(singleVaultData_, srcSender_, srcChainId_);
        } else {
            revert Error.INVALID_CHAIN_ID();
        }
    }

    /// @inheritdoc IBaseForm
    function xChainWithdrawFromVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_,
        uint64 srcChainId_
    )
        external
        override
        onlyCoreStateRegistry
        returns (uint256 assets)
    {
        if (srcChainId_ != 0 && srcChainId_ != CHAIN_ID) {
            if (!_isPaused(singleVaultData_.superformId)) {
                assets = _xChainWithdrawFromVault(singleVaultData_, srcSender_, srcChainId_);
            } else {
                IEmergencyQueue(superRegistry.getAddress(keccak256("EMERGENCY_QUEUE"))).queueWithdrawal(
                    singleVaultData_
                );
            }
        } else {
            revert Error.INVALID_CHAIN_ID();
        }
    }

    /// @inheritdoc IBaseForm
    function emergencyWithdraw(address receiverAddress_, uint256 amount_) external override onlyEmergencyQueue {
        _emergencyWithdraw(receiverAddress_, amount_);
    }

    /// @inheritdoc IBaseForm
    function forwardDustToPaymaster(address token_) external override {
        if (token_ == vault) revert Error.CANNOT_FORWARD_4646_TOKEN();
        _forwardDustToPaymaster(token_);
    }

    /// @dev Checks if the Form implementation has the appropriate interface support
    /// @param interfaceId_ is the interfaceId to check  
    function supportsInterface(bytes4 interfaceId_) public view virtual override(ERC165, IERC165) returns (bool) {
        return interfaceId_ == type(IBaseForm).interfaceId || super.supportsInterface(interfaceId_);
    }

    //////////////////////////////////////////////////////////////
    //                  INTERNAL FUNCTIONS                      //
    //////////////////////////////////////////////////////////////

    /// @dev Deposits underlying tokens into a vault
    function _directDepositIntoVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_
    )
        internal
        virtual
        returns (uint256 shares);

    /// @dev Deposits underlying tokens into a vault
    function _xChainDepositIntoVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_,
        uint64 srcChainId_
    )
        internal
        virtual
        returns (uint256 shares);

    /// @dev Withdraws underlying tokens from a vault
    function _directWithdrawFromVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_
    )
        internal
        virtual
        returns (uint256 assets);

    /// @dev Withdraws underlying tokens from a vault
    function _xChainWithdrawFromVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_,
        uint64 srcChainId_
    )
        internal
        virtual
        returns (uint256 assets);

    /// @dev withdraws vault shares from form during emergency
    function _emergencyWithdraw(address receiverAddress_, uint256 amount_) internal virtual;

    /// @dev forwards dust to paymaster
    function _forwardDustToPaymaster(address token_) internal virtual;

    /// @dev returns if a form id is paused
    function _isPaused(uint256 superformId) internal view returns (bool) {
        address factory = superRegistry.getAddress(keccak256("SUPERFORM_FACTORY"));
        if (!ISuperformFactory(factory).isSuperform(superformId)) {
            revert Error.SUPERFORM_ID_NONEXISTENT();
        }

        (, uint32 formImplementationId_,) = superformId.getSuperform();

        return ISuperformFactory(factory).isFormImplementationPaused(formImplementationId_);
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

/// @dev contains all the common struct and enums used for data communication between chains.

/// @dev There are two transaction types in Superform Protocol
enum TransactionType {
    DEPOSIT,
    WITHDRAW
}

/// @dev Message types can be INIT, RETURN (for successful Deposits) and FAIL (for failed withdraws)
enum CallbackType {
    INIT,
    RETURN,
    FAIL
}

/// @dev Payloads are stored, updated (deposits) or processed (finalized)
enum PayloadState {
    STORED,
    UPDATED,
    PROCESSED
}

/// @dev contains all the common struct used for interchain token transfers.
struct LiqRequest {
    /// @dev generated data
    bytes txData;
    /// @dev input token for deposits, desired output token on target liqDstChainId for withdraws. Must be set for
    /// txData to be updated on destination for withdraws
    address token;
    /// @dev intermediary token on destination. Relevant for xChain deposits where a destination swap is needed for
    /// validation purposes
    address interimToken;
    /// @dev what bridge to use to move tokens
    uint8 bridgeId;
    /// @dev dstChainId = liqDstchainId for deposits. For withdraws it is the target chain id for where the underlying
    /// is to be delivered
    uint64 liqDstChainId;
    /// @dev currently this amount is used as msg.value in the txData call.
    uint256 nativeAmount;
}

/// @dev main struct that holds required multi vault data for an action
struct MultiVaultSFData {
    // superformids must have same destination. Can have different underlyings
    uint256[] superformIds;
    uint256[] amounts; // on deposits, amount of token to deposit on dst, on withdrawals, superpositions to burn
    uint256[] outputAmounts; // on deposits, amount of shares to receive, on withdrawals, amount of assets to receive
    uint256[] maxSlippages;
    LiqRequest[] liqRequests; // if length = 1; amount = sum(amounts) | else  amounts must match the amounts being sent
    bytes permit2data;
    bool[] hasDstSwaps;
    bool[] retain4626s; // if true, we don't mint SuperPositions, and send the 4626 back to the user instead
    address receiverAddress;
    /// this address must always be an EOA otherwise funds may be lost
    address receiverAddressSP;
    /// this address can be a EOA or a contract that implements onERC1155Receiver. must always be set for deposits
    bytes extraFormData; // extraFormData
}

/// @dev main struct that holds required single vault data for an action
struct SingleVaultSFData {
    // superformids must have same destination. Can have different underlyings
    uint256 superformId;
    uint256 amount;
    uint256 outputAmount; // on deposits, amount of shares to receive, on withdrawals, amount of assets to receive
    uint256 maxSlippage;
    LiqRequest liqRequest; // if length = 1; amount = sum(amounts)| else  amounts must match the amounts being sent
    bytes permit2data;
    bool hasDstSwap;
    bool retain4626; // if true, we don't mint SuperPositions, and send the 4626 back to the user instead
    address receiverAddress;
    /// this address must always be an EOA otherwise funds may be lost
    address receiverAddressSP;
    /// this address can be a EOA or a contract that implements onERC1155Receiver. must always be set for deposits
    bytes extraFormData; // extraFormData
}

/// @dev overarching struct for multiDst requests with multi vaults
struct MultiDstMultiVaultStateReq {
    uint8[][] ambIds;
    uint64[] dstChainIds;
    MultiVaultSFData[] superformsData;
}

/// @dev overarching struct for single cross chain requests with multi vaults
struct SingleXChainMultiVaultStateReq {
    uint8[] ambIds;
    uint64 dstChainId;
    MultiVaultSFData superformsData;
}

/// @dev overarching struct for multiDst requests with single vaults
struct MultiDstSingleVaultStateReq {
    uint8[][] ambIds;
    uint64[] dstChainIds;
    SingleVaultSFData[] superformsData;
}

/// @dev overarching struct for single cross chain requests with single vaults
struct SingleXChainSingleVaultStateReq {
    uint8[] ambIds;
    uint64 dstChainId;
    SingleVaultSFData superformData;
}

/// @dev overarching struct for single direct chain requests with single vaults
struct SingleDirectSingleVaultStateReq {
    SingleVaultSFData superformData;
}

/// @dev overarching struct for single direct chain requests with multi vaults
struct SingleDirectMultiVaultStateReq {
    MultiVaultSFData superformData;
}

/// @dev struct for SuperRouter with re-arranged data for the message (contains the payloadId)
/// @dev realize that receiverAddressSP is not passed, only needed on source chain to mint
struct InitMultiVaultData {
    uint256 payloadId;
    uint256[] superformIds;
    uint256[] amounts;
    uint256[] outputAmounts;
    uint256[] maxSlippages;
    LiqRequest[] liqData;
    bool[] hasDstSwaps;
    bool[] retain4626s;
    address receiverAddress;
    bytes extraFormData;
}

/// @dev struct for SuperRouter with re-arranged data for the message (contains the payloadId)
struct InitSingleVaultData {
    uint256 payloadId;
    uint256 superformId;
    uint256 amount;
    uint256 outputAmount;
    uint256 maxSlippage;
    LiqRequest liqData;
    bool hasDstSwap;
    bool retain4626;
    address receiverAddress;
    bytes extraFormData;
}

/// @dev struct for Emergency Queue
struct QueuedWithdrawal {
    address receiverAddress;
    uint256 superformId;
    uint256 amount;
    uint256 srcPayloadId;
    bool isProcessed;
}

/// @dev all statuses of the timelock payload
enum TimelockStatus {
    UNAVAILABLE,
    PENDING,
    PROCESSED
}

/// @dev holds information about the timelock payload
struct TimelockPayload {
    uint8 isXChain;
    uint64 srcChainId;
    uint256 lockedTill;
    InitSingleVaultData data;
    TimelockStatus status;
}

/// @dev struct that contains the type of transaction, callback flags and other identification, as well as the vaults
/// data in params
struct AMBMessage {
    uint256 txInfo; // tight packing of  TransactionType txType,  CallbackType flag  if multi/single vault, registry id,
        // srcSender and srcChainId
    bytes params; // decoding txInfo will point to the right datatype of params. Refer PayloadHelper.sol
}

/// @dev struct that contains the information required for broadcasting changes
struct BroadcastMessage {
    bytes target;
    bytes32 messageType;
    bytes message;
}

/// @dev struct that contains info on returned data from destination
struct ReturnMultiData {
    uint256 payloadId;
    uint256[] superformIds;
    uint256[] amounts;
}

/// @dev struct that contains info on returned data from destination
struct ReturnSingleData {
    uint256 payloadId;
    uint256 superformId;
    uint256 amount;
}

/// @dev struct that contains the data on the fees to pay to the AMBs
struct AMBExtraData {
    uint256[] gasPerAMB;
    bytes[] extraDataPerAMB;
}

/// @dev struct that contains the data on the fees to pay to the AMBs on broadcasts
struct BroadCastAMBExtraData {
    uint256[] gasPerDst;
    bytes[] extraDataPerDst;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

import { InitSingleVaultData } from "src/types/DataTypes.sol";
import { IERC165 } from "openzeppelin-contracts/contracts/utils/introspection/IERC165.sol";
import { IERC4626 } from "openzeppelin-contracts/contracts/interfaces/IERC4626.sol";

/// @title IBaseForm
/// @dev Interface for BaseForm
/// @author ZeroPoint Labs
interface IBaseForm is IERC165 {
    
    //////////////////////////////////////////////////////////////
    //                          EVENTS                           //
    //////////////////////////////////////////////////////////////

    /// @dev is emitted when a new vault is added by the admin.
    event VaultAdded(uint256 indexed id, IERC4626 indexed vault);

    /// @dev is emitted when a payload is processed by the destination contract.
    event Processed(
        uint64 indexed srcChainID,
        uint64 indexed dstChainId,
        uint256 indexed srcPayloadId,
        uint256 amount,
        address vault
    );

    /// @dev is emitted when an emergency withdrawal is processed
    event EmergencyWithdrawalProcessed(address indexed refundAddress, uint256 indexed amount);

    /// @dev is emitted when dust is forwarded to the paymaster
    event FormDustForwardedToPaymaster(address indexed token, uint256 indexed amount);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL VIEW FUNCTIONS                     //
    //////////////////////////////////////////////////////////////

    /// @notice get Superform name of the ERC20 vault representation
    /// @return The ERC20 name
    function superformYieldTokenName() external view returns (string memory);

    /// @notice get Superform symbol of the ERC20 vault representation
    /// @return The ERC20 symbol
    function superformYieldTokenSymbol() external view returns (string memory);

    /// @notice get the state registry id associated with the vault
    function getStateRegistryId() external view returns (uint8);

    /// @notice Returns the vault address
    /// @return The address of the vault
    function getVaultAddress() external view returns (address);

    /// @notice Returns the vault address
    /// @return The address of the vault asset
    function getVaultAsset() external view returns (address);

    /// @notice Returns the name of the vault.
    /// @return The name of the vault
    function getVaultName() external view returns (string memory);

    /// @notice Returns the symbol of a vault.
    /// @return The symbol associated with a vault
    function getVaultSymbol() external view returns (string memory);

    /// @notice Returns the number of decimals in a vault for accounting purposes
    /// @return The number of decimals in the vault balance
    function getVaultDecimals() external view returns (uint256);

    /// @notice Returns the amount of underlying tokens each share of a vault is worth.
    /// @return The pricePerVaultShare value
    function getPricePerVaultShare() external view returns (uint256);

    /// @notice Returns the amount of vault shares owned by the form.
    /// @return The form's vault share balance
    function getVaultShareBalance() external view returns (uint256);

    /// @notice get the total amount of underlying managed in the ERC4626 vault
    function getTotalAssets() external view returns (uint256);

    /// @notice get the total amount of unredeemed vault shares in circulation
    function getTotalSupply() external view returns (uint256);

    /// @notice get the total amount of assets received if shares are actually redeemed
    /// @notice https://eips.ethereum.org/EIPS/eip-4626
    function getPreviewPricePerVaultShare() external view returns (uint256);

    /// @dev API may need to know state of funds deployed
    function previewDepositTo(uint256 assets_) external view returns (uint256);

    /// @notice positionBalance() -> .vaultIds&destAmounts
    /// @return how much of an asset + interest (accrued) is to withdraw from the Vault
    function previewWithdrawFrom(uint256 assets_) external view returns (uint256);

    /// @dev API may need to know state of funds deployed
    function previewRedeemFrom(uint256 shares_) external view returns (uint256);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL WRITE FUNCTIONS                    //
    //////////////////////////////////////////////////////////////

    /// @dev process same chain id deposits
    /// @param singleVaultData_  A bytes representation containing all the data required to make a form action
    /// @param srcSender_ The address of the sender of the transaction
    /// @return shares  The amount of vault shares received
    function directDepositIntoVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_
    )
        external
        payable
        returns (uint256 shares);

    /// @dev process same chain id deposits
    /// @param singleVaultData_  A bytes representation containing all the data required to make a form action
    /// @param srcSender_ The address of the sender of the transaction
    /// @param srcChainId_ The chain id of the source chain
    /// @return shares  The amount of vault shares received
    /// @dev is shares is `0` then no further action/acknowledgement needs to be sent
    function xChainDepositIntoVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_,
        uint64 srcChainId_
    )
        external
        returns (uint256 shares);

    /// @dev process withdrawal of asset from a vault
    /// @param singleVaultData_  A bytes representation containing all the data required to make a form action
    /// @param srcSender_ The address of the sender of the transaction
    /// @return assets  The amount of assets received
    function directWithdrawFromVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_
    )
        external
        returns (uint256 assets);

    /// @dev process withdrawal of asset from a vault
    /// @param singleVaultData_  A bytes representation containing all the data required to make a form action
    /// @param srcSender_ The address of the sender of the transaction
    /// @param srcChainId_ The chain id of the source chain
    /// @return assets The amount of assets received
    function xChainWithdrawFromVault(
        InitSingleVaultData memory singleVaultData_,
        address srcSender_,
        uint64 srcChainId_
    )
        external
        returns (uint256 assets);

    /// @dev process withdrawal of shares if form is paused
    /// @param receiverAddress_ The address to refund the shares to
    /// @param amount_ The amount of vault shares to refund
    function emergencyWithdraw(address receiverAddress_, uint256 amount_) external;

    /// @dev moves all dust in the contract to Paymaster contract
    /// @param token_ The address of the token to forward
    function forwardDustToPaymaster(address token_) external;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

import { IAccessControl } from "openzeppelin-contracts/contracts/access/IAccessControl.sol";

/// @title ISuperRBAC
/// @dev Interface for SuperRBAC
/// @author Zeropoint Labs
interface ISuperRBAC is IAccessControl {

    //////////////////////////////////////////////////////////////
    //                           STRUCTS                         //
    //////////////////////////////////////////////////////////////

    struct InitialRoleSetup {
        address admin;
        address emergencyAdmin;
        address paymentAdmin;
        address csrProcessor;
        address tlProcessor;
        address brProcessor;
        address csrUpdater;
        address srcVaaRelayer;
        address dstSwapper;
        address csrRescuer;
        address csrDisputer;
    }

    //////////////////////////////////////////////////////////////
    //                          EVENTS                          //
    //////////////////////////////////////////////////////////////

    /// @dev is emitted when superRegistry is set
    event SuperRegistrySet(address indexed superRegistry);

    /// @dev is emitted when an admin is set for a role
    event RoleAdminSet(bytes32 role, bytes32 adminRole);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL VIEW FUNCTIONS                     //
    //////////////////////////////////////////////////////////////

    /// @dev returns the id of the protocol admin role
    function PROTOCOL_ADMIN_ROLE() external view returns (bytes32);

    /// @dev returns the id of the emergency admin role
    function EMERGENCY_ADMIN_ROLE() external view returns (bytes32);

    /// @dev returns the id of the payment admin role
    function PAYMENT_ADMIN_ROLE() external view returns (bytes32);

    /// @dev returns the id of the broadcaster role
    function BROADCASTER_ROLE() external view returns (bytes32);

    /// @dev returns the id of the core state registry processor role
    function CORE_STATE_REGISTRY_PROCESSOR_ROLE() external view returns (bytes32);

    /// @dev returns the id of the timelock state registry processor role
    function TIMELOCK_STATE_REGISTRY_PROCESSOR_ROLE() external view returns (bytes32);

    /// @dev returns the id of the broadcast state registry processor role
    function BROADCAST_STATE_REGISTRY_PROCESSOR_ROLE() external view returns (bytes32);

    /// @dev returns the id of the core state registry updater role
    function CORE_STATE_REGISTRY_UPDATER_ROLE() external view returns (bytes32);

    /// @dev returns the id of the dst swapper role
    function DST_SWAPPER_ROLE() external view returns (bytes32);

    /// @dev returns the id of the core state registry rescuer role
    function CORE_STATE_REGISTRY_RESCUER_ROLE() external view returns (bytes32);

    /// @dev returns the id of the core state registry rescue disputer role
    function CORE_STATE_REGISTRY_DISPUTER_ROLE() external view returns (bytes32);

    /// @dev returns the id of wormhole vaa relayer role
    function WORMHOLE_VAA_RELAYER_ROLE() external view returns (bytes32);

    /// @dev returns whether the given address has the protocol admin role
    /// @param admin_ the address to check
    function hasProtocolAdminRole(address admin_) external view returns (bool);

    /// @dev returns whether the given address has the emergency admin role
    /// @param admin_ the address to check
    function hasEmergencyAdminRole(address admin_) external view returns (bool);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL WRITE FUNCTIONS                    //
    //////////////////////////////////////////////////////////////

    /// @dev updates the super registry address
    function setSuperRegistry(address superRegistry_) external;

    /// @dev configures a new role in superForm
    /// @param role_ the role to set
    /// @param adminRole_ the admin role to set as admin
    function setRoleAdmin(bytes32 role_, bytes32 adminRole_) external;

    /// @dev revokes the role_ from superRegistryAddressId_ on all chains
    /// @param role_ the role to revoke
    /// @param extraData_ amb config if broadcasting is required
    /// @param superRegistryAddressId_ the super registry address id
    function revokeRoleSuperBroadcast(
        bytes32 role_,
        bytes memory extraData_,
        bytes32 superRegistryAddressId_
    )
        external
        payable;

    /// @dev allows sync of global roles from different chains using broadcast registry
    /// @notice may not work for all roles
    function stateSyncBroadcast(bytes memory data_) external;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

/// @title ISuperRegistry
/// @dev Interface for SuperRegistry
/// @author Zeropoint Labs
interface ISuperRegistry {
    //////////////////////////////////////////////////////////////
    //                          EVENTS                          //
    //////////////////////////////////////////////////////////////

    /// @dev emitted when permit2 is set.
    event SetPermit2(address indexed permit2);

    /// @dev is emitted when an address is set.
    event AddressUpdated(
        bytes32 indexed protocolAddressId, uint64 indexed chainId, address indexed oldAddress, address newAddress
    );

    /// @dev is emitted when a new token bridge is configured.
    event SetBridgeAddress(uint256 indexed bridgeId, address indexed bridgeAddress);

    /// @dev is emitted when a new bridge validator is configured.
    event SetBridgeValidator(uint256 indexed bridgeId, address indexed bridgeValidator);

    /// @dev is emitted when a new amb is configured.
    event SetAmbAddress(uint8 indexed ambId_, address indexed ambAddress_, bool indexed isBroadcastAMB_);

    /// @dev is emitted when a new state registry is configured.
    event SetStateRegistryAddress(uint8 indexed registryId_, address indexed registryAddress_);

    /// @dev is emitted when a new delay is configured.
    event SetDelay(uint256 indexed oldDelay_, uint256 indexed newDelay_);

    /// @dev is emitted when a new vault limit is configured
    event SetVaultLimitPerDestination(uint64 indexed chainId_, uint256 indexed vaultLimit_);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL VIEW FUNCTIONS                     //
    //////////////////////////////////////////////////////////////

    /// @dev gets the deposit rescue delay
    function delay() external view returns (uint256);

    /// @dev returns the permit2 address
    function PERMIT2() external view returns (address);

    /// @dev returns the id of the superform router module
    function SUPERFORM_ROUTER() external view returns (bytes32);

    /// @dev returns the id of the superform factory module
    function SUPERFORM_FACTORY() external view returns (bytes32);

    /// @dev returns the id of the superform paymaster contract
    function PAYMASTER() external view returns (bytes32);

    /// @dev returns the id of the superform payload helper contract
    function PAYMENT_HELPER() external view returns (bytes32);

    /// @dev returns the id of the core state registry module
    function CORE_STATE_REGISTRY() external view returns (bytes32);

    /// @dev returns the id of the timelock form state registry module
    function TIMELOCK_STATE_REGISTRY() external view returns (bytes32);

    /// @dev returns the id of the broadcast state registry module
    function BROADCAST_REGISTRY() external view returns (bytes32);

    /// @dev returns the id of the super positions module
    function SUPER_POSITIONS() external view returns (bytes32);

    /// @dev returns the id of the super rbac module
    function SUPER_RBAC() external view returns (bytes32);

    /// @dev returns the id of the payload helper module
    function PAYLOAD_HELPER() external view returns (bytes32);

    /// @dev returns the id of the dst swapper keeper
    function DST_SWAPPER() external view returns (bytes32);

    /// @dev returns the id of the emergency queue
    function EMERGENCY_QUEUE() external view returns (bytes32);

    /// @dev returns the id of the superform receiver
    function SUPERFORM_RECEIVER() external view returns (bytes32);

    /// @dev returns the id of the payment admin keeper
    function PAYMENT_ADMIN() external view returns (bytes32);

    /// @dev returns the id of the core state registry processor keeper
    function CORE_REGISTRY_PROCESSOR() external view returns (bytes32);

    /// @dev returns the id of the broadcast registry processor keeper
    function BROADCAST_REGISTRY_PROCESSOR() external view returns (bytes32);

    /// @dev returns the id of the timelock form state registry processor keeper
    function TIMELOCK_REGISTRY_PROCESSOR() external view returns (bytes32);

    /// @dev returns the id of the core state registry updater keeper
    function CORE_REGISTRY_UPDATER() external view returns (bytes32);

    /// @dev returns the id of the core state registry updater keeper
    function CORE_REGISTRY_RESCUER() external view returns (bytes32);

    /// @dev returns the id of the core state registry updater keeper
    function CORE_REGISTRY_DISPUTER() external view returns (bytes32);

    /// @dev returns the id of the core state registry updater keeper
    function DST_SWAPPER_PROCESSOR() external view returns (bytes32);

    /// @dev gets the address of a contract on current chain
    /// @param id_ is the id of the contract
    function getAddress(bytes32 id_) external view returns (address);

    /// @dev gets the address of a contract on a target chain
    /// @param id_ is the id of the contract
    /// @param chainId_ is the chain id of that chain
    function getAddressByChainId(bytes32 id_, uint64 chainId_) external view returns (address);

    /// @dev gets the address of a bridge
    /// @param bridgeId_ is the id of a bridge
    /// @return bridgeAddress_ is the address of the form
    function getBridgeAddress(uint8 bridgeId_) external view returns (address bridgeAddress_);

    /// @dev gets the address of a bridge validator
    /// @param bridgeId_ is the id of a bridge
    /// @return bridgeValidator_ is the address of the form
    function getBridgeValidator(uint8 bridgeId_) external view returns (address bridgeValidator_);

    /// @dev gets the address of a amb
    /// @param ambId_ is the id of a bridge
    /// @return ambAddress_ is the address of the form
    function getAmbAddress(uint8 ambId_) external view returns (address ambAddress_);

    /// @dev gets the id of the amb
    /// @param ambAddress_ is the address of an amb
    /// @return ambId_ is the identifier of an amb
    function getAmbId(address ambAddress_) external view returns (uint8 ambId_);

    /// @dev gets the address of the registry
    /// @param registryId_ is the id of the state registry
    /// @return registryAddress_ is the address of the state registry
    function getStateRegistry(uint8 registryId_) external view returns (address registryAddress_);

    /// @dev gets the id of the registry
    /// @notice reverts if the id is not found
    /// @param registryAddress_ is the address of the state registry
    /// @return registryId_ is the id of the state registry
    function getStateRegistryId(address registryAddress_) external view returns (uint8 registryId_);

    /// @dev gets the safe vault limit
    /// @param chainId_ is the id of the remote chain
    /// @return vaultLimitPerDestination_ is the safe number of vaults to deposit
    /// without hitting out of gas error
    function getVaultLimitPerDestination(uint64 chainId_) external view returns (uint256 vaultLimitPerDestination_);

    /// @dev helps validate if an address is a valid state registry
    /// @param registryAddress_ is the address of the state registry
    /// @return valid_ a flag indicating if its valid.
    function isValidStateRegistry(address registryAddress_) external view returns (bool valid_);

    /// @dev helps validate if an address is a valid amb implementation
    /// @param ambAddress_ is the address of the amb implementation
    /// @return valid_ a flag indicating if its valid.
    function isValidAmbImpl(address ambAddress_) external view returns (bool valid_);

    /// @dev helps validate if an address is a valid broadcast amb implementation
    /// @param ambAddress_ is the address of the broadcast amb implementation
    /// @return valid_ a flag indicating if its valid.
    function isValidBroadcastAmbImpl(address ambAddress_) external view returns (bool valid_);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL WRITE FUNCTIONS                    //
    //////////////////////////////////////////////////////////////

    /// @dev sets the deposit rescue delay
    /// @param delay_ the delay in seconds before the deposit rescue can be finalized
    function setDelay(uint256 delay_) external;

    /// @dev sets the permit2 address
    /// @param permit2_ the address of the permit2 contract
    function setPermit2(address permit2_) external;

    /// @dev sets the safe vault limit
    /// @param chainId_ is the remote chain identifier
    /// @param vaultLimit_ is the max limit of vaults per transaction
    function setVaultLimitPerDestination(uint64 chainId_, uint256 vaultLimit_) external;

    /// @dev sets new addresses on specific chains.
    /// @param ids_ are the identifiers of the address on that chain
    /// @param newAddresses_  are the new addresses on that chain
    /// @param chainIds_ are the chain ids of that chain
    function batchSetAddress(
        bytes32[] calldata ids_,
        address[] calldata newAddresses_,
        uint64[] calldata chainIds_
    )
        external;

    /// @dev sets a new address on a specific chain.
    /// @param id_ the identifier of the address on that chain
    /// @param newAddress_ the new address on that chain
    /// @param chainId_ the chain id of that chain
    function setAddress(bytes32 id_, address newAddress_, uint64 chainId_) external;

    /// @dev allows admin to set the bridge address for an bridge id.
    /// @notice this function operates in an APPEND-ONLY fashion.
    /// @param bridgeId_         represents the bridge unique identifier.
    /// @param bridgeAddress_    represents the bridge address.
    /// @param bridgeValidator_  represents the bridge validator address.
    function setBridgeAddresses(
        uint8[] memory bridgeId_,
        address[] memory bridgeAddress_,
        address[] memory bridgeValidator_
    )
        external;

    /// @dev allows admin to set the amb address for an amb id.
    /// @notice this function operates in an APPEND-ONLY fashion.
    /// @param ambId_         represents the bridge unique identifier.
    /// @param ambAddress_    represents the bridge address.
    /// @param isBroadcastAMB_ represents whether the amb implementation supports broadcasting
    function setAmbAddress(
        uint8[] memory ambId_,
        address[] memory ambAddress_,
        bool[] memory isBroadcastAMB_
    )
        external;

    /// @dev allows admin to set the state registry address for an state registry id.
    /// @notice this function operates in an APPEND-ONLY fashion.
    /// @param registryId_    represents the state registry's unique identifier.
    /// @param registryAddress_    represents the state registry's address.
    function setStateRegistryAddress(uint8[] memory registryId_, address[] memory registryAddress_) external;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

import { Error } from "src/libraries/Error.sol";

library DataLib {
    function packTxInfo(
        uint8 txType_,
        uint8 callbackType_,
        uint8 multi_,
        uint8 registryId_,
        address srcSender_,
        uint64 srcChainId_
    )
        internal
        pure
        returns (uint256 txInfo)
    {
        txInfo = uint256(txType_);
        txInfo |= uint256(callbackType_) << 8;
        txInfo |= uint256(multi_) << 16;
        txInfo |= uint256(registryId_) << 24;
        txInfo |= uint256(uint160(srcSender_)) << 32;
        txInfo |= uint256(srcChainId_) << 192;
    }

    function decodeTxInfo(uint256 txInfo_)
        internal
        pure
        returns (uint8 txType, uint8 callbackType, uint8 multi, uint8 registryId, address srcSender, uint64 srcChainId)
    {
        txType = uint8(txInfo_);
        callbackType = uint8(txInfo_ >> 8);
        multi = uint8(txInfo_ >> 16);
        registryId = uint8(txInfo_ >> 24);
        srcSender = address(uint160(txInfo_ >> 32));
        srcChainId = uint64(txInfo_ >> 192);
    }

    /// @dev returns the vault-form-chain pair of a superform
    /// @param superformId_ is the id of the superform
    /// @return superform_ is the address of the superform
    /// @return formImplementationId_ is the form id
    /// @return chainId_ is the chain id
    function getSuperform(uint256 superformId_)
        internal
        pure
        returns (address superform_, uint32 formImplementationId_, uint64 chainId_)
    {
        superform_ = address(uint160(superformId_));
        formImplementationId_ = uint32(superformId_ >> 160);
        chainId_ = uint64(superformId_ >> 192);

        if (chainId_ == 0) {
            revert Error.INVALID_CHAIN_ID();
        }
    }

    /// @dev returns the vault-form-chain pair of an array of superforms
    /// @param superformIds_  array of superforms
    /// @return superforms_ are the address of the vaults
    function getSuperforms(uint256[] memory superformIds_) internal pure returns (address[] memory superforms_) {
        uint256 len = superformIds_.length;
        superforms_ = new address[](len);

        for (uint256 i; i < len; ++i) {
            (superforms_[i],,) = getSuperform(superformIds_[i]);
        }
    }

    /// @dev returns the destination chain of a given superform
    /// @param superformId_ is the id of the superform
    /// @return chainId_ is the chain id
    function getDestinationChain(uint256 superformId_) internal pure returns (uint64 chainId_) {
        chainId_ = uint64(superformId_ >> 192);

        if (chainId_ == 0) {
            revert Error.INVALID_CHAIN_ID();
        }
    }

    /// @dev generates the superformId
    /// @param superform_ is the address of the superform
    /// @param formImplementationId_ is the type of the form
    /// @param chainId_ is the chain id on which the superform is deployed
    function packSuperform(
        address superform_,
        uint32 formImplementationId_,
        uint64 chainId_
    )
        internal
        pure
        returns (uint256 superformId_)
    {
        superformId_ = uint256(uint160(superform_));
        superformId_ |= uint256(formImplementationId_) << 160;
        superformId_ |= uint256(chainId_) << 192;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

library Error {
    //////////////////////////////////////////////////////////////
    //                  CONFIGURATION ERRORS                    //
    //////////////////////////////////////////////////////////////
    ///@notice errors thrown in protocol setup

    /// @dev thrown if chain id exceeds max(uint64)
    error BLOCK_CHAIN_ID_OUT_OF_BOUNDS();

    /// @dev thrown if not possible to revoke a role in broadcasting
    error CANNOT_REVOKE_NON_BROADCASTABLE_ROLES();

    /// @dev thrown if not possible to revoke last admin
    error CANNOT_REVOKE_LAST_ADMIN();

    /// @dev thrown if trying to set again pseudo immutables in super registry
    error DISABLED();

    /// @dev thrown if rescue delay is not yet set for a chain
    error DELAY_NOT_SET();

    /// @dev thrown if get native token price estimate in paymentHelper is 0
    error INVALID_NATIVE_TOKEN_PRICE();

    /// @dev thrown if wormhole refund chain id is not set
    error REFUND_CHAIN_ID_NOT_SET();

    /// @dev thrown if wormhole relayer is not set
    error RELAYER_NOT_SET();

    /// @dev thrown if a role to be revoked is not assigned
    error ROLE_NOT_ASSIGNED();

    //////////////////////////////////////////////////////////////
    //                  AUTHORIZATION ERRORS                    //
    //////////////////////////////////////////////////////////////
    ///@notice errors thrown if functions cannot be called

    /// COMMON AUTHORIZATION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if caller is not address(this), internal call
    error INVALID_INTERNAL_CALL();

    /// @dev thrown if msg.sender is not a valid amb implementation
    error NOT_AMB_IMPLEMENTATION();

    /// @dev thrown if msg.sender is not an allowed broadcaster
    error NOT_ALLOWED_BROADCASTER();

    /// @dev thrown if msg.sender is not broadcast amb implementation
    error NOT_BROADCAST_AMB_IMPLEMENTATION();

    /// @dev thrown if msg.sender is not broadcast state registry
    error NOT_BROADCAST_REGISTRY();

    /// @dev thrown if msg.sender is not core state registry
    error NOT_CORE_STATE_REGISTRY();

    /// @dev thrown if msg.sender is not emergency admin
    error NOT_EMERGENCY_ADMIN();

    /// @dev thrown if msg.sender is not emergency queue
    error NOT_EMERGENCY_QUEUE();

    /// @dev thrown if msg.sender is not minter
    error NOT_MINTER();

    /// @dev thrown if msg.sender is not minter state registry
    error NOT_MINTER_STATE_REGISTRY_ROLE();

    /// @dev thrown if msg.sender is not paymaster
    error NOT_PAYMASTER();

    /// @dev thrown if msg.sender is not payment admin
    error NOT_PAYMENT_ADMIN();

    /// @dev thrown if msg.sender is not protocol admin
    error NOT_PROTOCOL_ADMIN();

    /// @dev thrown if msg.sender is not state registry
    error NOT_STATE_REGISTRY();

    /// @dev thrown if msg.sender is not super registry
    error NOT_SUPER_REGISTRY();

    /// @dev thrown if msg.sender is not superform router
    error NOT_SUPERFORM_ROUTER();

    /// @dev thrown if msg.sender is not a superform
    error NOT_SUPERFORM();

    /// @dev thrown if msg.sender is not superform factory
    error NOT_SUPERFORM_FACTORY();

    /// @dev thrown if msg.sender is not timelock form
    error NOT_TIMELOCK_SUPERFORM();

    /// @dev thrown if msg.sender is not timelock state registry
    error NOT_TIMELOCK_STATE_REGISTRY();

    /// @dev thrown if msg.sender is not user or disputer
    error NOT_VALID_DISPUTER();

    /// @dev thrown if the msg.sender is not privileged caller
    error NOT_PRIVILEGED_CALLER(bytes32 role);

    /// STATE REGISTRY AUTHORIZATION ERRORS
    /// ---------------------------------------------------------

    /// @dev layerzero adapter specific error, thrown if caller not layerzero endpoint
    error CALLER_NOT_ENDPOINT();

    /// @dev hyperlane adapter specific error, thrown if caller not hyperlane mailbox
    error CALLER_NOT_MAILBOX();

    /// @dev wormhole relayer specific error, thrown if caller not wormhole relayer
    error CALLER_NOT_RELAYER();

    /// @dev thrown if src chain sender is not valid
    error INVALID_SRC_SENDER();

    //////////////////////////////////////////////////////////////
    //                  INPUT VALIDATION ERRORS                 //
    //////////////////////////////////////////////////////////////
    ///@notice errors thrown if input variables are not valid

    /// COMMON INPUT VALIDATION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if there is an array length mismatch
    error ARRAY_LENGTH_MISMATCH();

    /// @dev thrown if payload id does not exist
    error INVALID_PAYLOAD_ID();

    /// @dev error thrown when msg value should be zero in certain payable functions
    error MSG_VALUE_NOT_ZERO();

    /// @dev thrown if amb ids length is 0
    error ZERO_AMB_ID_LENGTH();

    /// @dev thrown if address input is address 0
    error ZERO_ADDRESS();

    /// @dev thrown if amount input is 0
    error ZERO_AMOUNT();

    /// @dev thrown if final token is address 0
    error ZERO_FINAL_TOKEN();

    /// @dev thrown if value input is 0
    error ZERO_INPUT_VALUE();

    /// SUPERFORM ROUTER INPUT VALIDATION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if the vaults data is invalid
    error INVALID_SUPERFORMS_DATA();

    /// @dev thrown if receiver address is not set
    error RECEIVER_ADDRESS_NOT_SET();

    /// SUPERFORM FACTORY INPUT VALIDATION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if a form is not ERC165 compatible
    error ERC165_UNSUPPORTED();

    /// @dev thrown if a form is not form interface compatible
    error FORM_INTERFACE_UNSUPPORTED();

    /// @dev error thrown if form implementation address already exists
    error FORM_IMPLEMENTATION_ALREADY_EXISTS();

    /// @dev error thrown if form implementation id already exists
    error FORM_IMPLEMENTATION_ID_ALREADY_EXISTS();

    /// @dev thrown if a form does not exist
    error FORM_DOES_NOT_EXIST();

    /// @dev thrown if form id is larger than max uint16
    error INVALID_FORM_ID();

    /// @dev thrown if superform not on factory
    error SUPERFORM_ID_NONEXISTENT();

    /// @dev thrown if same vault and form implementation is used to create new superform
    error VAULT_FORM_IMPLEMENTATION_COMBINATION_EXISTS();

    /// FORM INPUT VALIDATION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if in case of no txData, if liqData.token != vault.asset()
    /// in case of txData, if token output of swap != vault.asset()
    error DIFFERENT_TOKENS();

    /// @dev thrown if the amount in direct withdraw is not correct
    error DIRECT_WITHDRAW_INVALID_LIQ_REQUEST();

    /// @dev thrown if the amount in xchain withdraw is not correct
    error XCHAIN_WITHDRAW_INVALID_LIQ_REQUEST();

    /// LIQUIDITY BRIDGE INPUT VALIDATION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if route id is blacklisted in socket
    error BLACKLISTED_ROUTE_ID();

    /// @dev thrown if route id is not blacklisted in socket
    error NOT_BLACKLISTED_ROUTE_ID();

    /// @dev error thrown when txData selector of lifi bridge is a blacklisted selector
    error BLACKLISTED_SELECTOR();

    /// @dev error thrown when txData selector of lifi bridge is not a blacklisted selector
    error NOT_BLACKLISTED_SELECTOR();

    /// @dev thrown if a certain action of the user is not allowed given the txData provided
    error INVALID_ACTION();

    /// @dev thrown if in deposits, the liqDstChainId doesn't match the stateReq dstChainId
    error INVALID_DEPOSIT_LIQ_DST_CHAIN_ID();

    /// @dev thrown if index is invalid
    error INVALID_INDEX();

    /// @dev thrown if the chain id in the txdata is invalid
    error INVALID_TXDATA_CHAIN_ID();

    /// @dev thrown if the validation of bridge txData fails due to a destination call present
    error INVALID_TXDATA_NO_DESTINATIONCALL_ALLOWED();

    /// @dev thrown if the validation of bridge txData fails due to wrong receiver
    error INVALID_TXDATA_RECEIVER();

    /// @dev thrown if the validation of bridge txData fails due to wrong token
    error INVALID_TXDATA_TOKEN();

    /// @dev thrown if txData is not present (in case of xChain actions)
    error NO_TXDATA_PRESENT();

    /// STATE REGISTRY INPUT VALIDATION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if payload is being updated with final amounts length different than amounts length
    error DIFFERENT_PAYLOAD_UPDATE_AMOUNTS_LENGTH();

    /// @dev thrown if payload is being updated with tx data length different than liq data length
    error DIFFERENT_PAYLOAD_UPDATE_TX_DATA_LENGTH();

    /// @dev thrown if keeper update final token is different than the vault underlying
    error INVALID_UPDATE_FINAL_TOKEN();

    /// @dev thrown if broadcast finality for wormhole is invalid
    error INVALID_BROADCAST_FINALITY();

    /// @dev thrown if amb id is not valid leading to an address 0 of the implementation
    error INVALID_BRIDGE_ID();

    /// @dev thrown if chain id involved in xchain message is invalid
    error INVALID_CHAIN_ID();

    /// @dev thrown if payload update amount isn't equal to dst swapper amount
    error INVALID_DST_SWAP_AMOUNT();

    /// @dev thrown if message amb and proof amb are the same
    error INVALID_PROOF_BRIDGE_ID();

    /// @dev thrown if order of proof AMBs is incorrect, either duplicated or not incrementing
    error INVALID_PROOF_BRIDGE_IDS();

    /// @dev thrown if rescue data lengths are invalid
    error INVALID_RESCUE_DATA();

    /// @dev thrown if delay is invalid
    error INVALID_TIMELOCK_DELAY();

    /// @dev thrown if amounts being sent in update payload mean a negative slippage
    error NEGATIVE_SLIPPAGE();

    /// @dev thrown if slippage is outside of bounds
    error SLIPPAGE_OUT_OF_BOUNDS();

    /// SUPERPOSITION INPUT VALIDATION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if src senders mismatch in state sync
    error SRC_SENDER_MISMATCH();

    /// @dev thrown if src tx types mismatch in state sync
    error SRC_TX_TYPE_MISMATCH();

    //////////////////////////////////////////////////////////////
    //                  EXECUTION ERRORS                        //
    //////////////////////////////////////////////////////////////
    ///@notice errors thrown due to function execution logic

    /// COMMON EXECUTION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if the swap in a direct deposit resulted in insufficient tokens
    error DIRECT_DEPOSIT_SWAP_FAILED();

    /// @dev thrown if payload is not unique
    error DUPLICATE_PAYLOAD();

    /// @dev thrown if native tokens fail to be sent to superform contracts
    error FAILED_TO_SEND_NATIVE();

    /// @dev thrown if allowance is not correct to deposit
    error INSUFFICIENT_ALLOWANCE_FOR_DEPOSIT();

    /// @dev thrown if contract has insufficient balance for operations
    error INSUFFICIENT_BALANCE();

    /// @dev thrown if native amount is not at least equal to the amount in the request
    error INSUFFICIENT_NATIVE_AMOUNT();

    /// @dev thrown if payload cannot be decoded
    error INVALID_PAYLOAD();

    /// @dev thrown if payload status is invalid
    error INVALID_PAYLOAD_STATUS();

    /// @dev thrown if payload type is invalid
    error INVALID_PAYLOAD_TYPE();

    /// LIQUIDITY BRIDGE EXECUTION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if we try to decode the final swap output token in a xChain liquidity bridging action
    error CANNOT_DECODE_FINAL_SWAP_OUTPUT_TOKEN();

    /// @dev thrown if liquidity bridge fails for erc20 or native tokens
    error FAILED_TO_EXECUTE_TXDATA(address token);

    /// @dev thrown if asset being used for deposit mismatches in multivault deposits
    error INVALID_DEPOSIT_TOKEN();

    /// STATE REGISTRY EXECUTION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if bridge tokens haven't arrived to destination
    error BRIDGE_TOKENS_PENDING();

    /// @dev thrown if withdrawal tx data cannot be updated
    error CANNOT_UPDATE_WITHDRAW_TX_DATA();

    /// @dev thrown if rescue passed dispute deadline
    error DISPUTE_TIME_ELAPSED();

    /// @dev thrown if message failed to reach the specified level of quorum needed
    error INSUFFICIENT_QUORUM();

    /// @dev thrown if broadcast payload is invalid
    error INVALID_BROADCAST_PAYLOAD();

    /// @dev thrown if broadcast fee is invalid
    error INVALID_BROADCAST_FEE();

    /// @dev thrown if retry fees is less than required
    error INVALID_RETRY_FEE();

    /// @dev thrown if broadcast message type is wrong
    error INVALID_MESSAGE_TYPE();

    /// @dev thrown if payload hash is invalid during `retryMessage` on Layezero implementation
    error INVALID_PAYLOAD_HASH();

    /// @dev thrown if update payload function was called on a wrong payload
    error INVALID_PAYLOAD_UPDATE_REQUEST();

    /// @dev thrown if a state registry id is 0
    error INVALID_REGISTRY_ID();

    /// @dev thrown if a form state registry id is 0
    error INVALID_FORM_REGISTRY_ID();

    /// @dev thrown if trying to finalize the payload but the withdraw is still locked
    error LOCKED();

    /// @dev thrown if payload is already updated (during xChain deposits)
    error PAYLOAD_ALREADY_UPDATED();

    /// @dev thrown if payload is already processed
    error PAYLOAD_ALREADY_PROCESSED();

    /// @dev thrown if payload is not in UPDATED state
    error PAYLOAD_NOT_UPDATED();

    /// @dev thrown if rescue is still in timelocked state
    error RESCUE_LOCKED();

    /// @dev thrown if rescue is already proposed
    error RESCUE_ALREADY_PROPOSED();

    /// @dev thrown if payload hash is zero during `retryMessage` on Layezero implementation
    error ZERO_PAYLOAD_HASH();

    /// DST SWAPPER EXECUTION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if process dst swap is tried for processed payload id
    error DST_SWAP_ALREADY_PROCESSED();

    /// @dev thrown if indices have duplicates
    error DUPLICATE_INDEX();

    /// @dev thrown if failed dst swap is already updated
    error FAILED_DST_SWAP_ALREADY_UPDATED();

    /// @dev thrown if indices are out of bounds
    error INDEX_OUT_OF_BOUNDS();

    /// @dev thrown if failed swap token amount is 0
    error INVALID_DST_SWAPPER_FAILED_SWAP();

    /// @dev thrown if failed swap token amount is not 0 and if token balance is less than amount (non zero)
    error INVALID_DST_SWAPPER_FAILED_SWAP_NO_TOKEN_BALANCE();

    /// @dev thrown if failed swap token amount is not 0 and if native amount is less than amount (non zero)
    error INVALID_DST_SWAPPER_FAILED_SWAP_NO_NATIVE_BALANCE();

    /// @dev forbid xChain deposits with destination swaps without interim token set (for user protection)
    error INVALID_INTERIM_TOKEN();

    /// @dev thrown if dst swap output is less than minimum expected
    error INVALID_SWAP_OUTPUT();

    /// FORM EXECUTION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if try to forward 4626 share from the superform
    error CANNOT_FORWARD_4646_TOKEN();

    /// @dev thrown in KYCDAO form if no KYC token is present
    error NO_VALID_KYC_TOKEN();

    /// @dev thrown in forms where a certain functionality is not allowed or implemented
    error NOT_IMPLEMENTED();

    /// @dev thrown if form implementation is PAUSED, users cannot perform any action
    error PAUSED();

    /// @dev thrown if shares != deposit output or assets != redeem output when minting SuperPositions
    error VAULT_IMPLEMENTATION_FAILED();

    /// @dev thrown if withdrawal tx data is not updated
    error WITHDRAW_TOKEN_NOT_UPDATED();

    /// @dev thrown if withdrawal tx data is not updated
    error WITHDRAW_TX_DATA_NOT_UPDATED();

    /// @dev thrown when redeeming from vault yields zero collateral
    error WITHDRAW_ZERO_COLLATERAL();

    /// PAYMENT HELPER EXECUTION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if chainlink is reporting an improper price
    error CHAINLINK_MALFUNCTION();

    /// @dev thrown if chainlink is reporting an incomplete round
    error CHAINLINK_INCOMPLETE_ROUND();

    /// @dev thrown if feed decimals is not 8
    error CHAINLINK_UNSUPPORTED_DECIMAL();

    /// EMERGENCY QUEUE EXECUTION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if emergency withdraw is not queued
    error EMERGENCY_WITHDRAW_NOT_QUEUED();

    /// @dev thrown if emergency withdraw is already processed
    error EMERGENCY_WITHDRAW_PROCESSED_ALREADY();

    /// SUPERPOSITION EXECUTION ERRORS
    /// ---------------------------------------------------------

    /// @dev thrown if uri cannot be updated
    error DYNAMIC_URI_FROZEN();

    /// @dev thrown if tx history is not found while state sync
    error TX_HISTORY_NOT_FOUND();
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165Checker.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Library used to query support of an interface declared via {IERC165}.
 *
 * Note that these functions return the actual result of the query: they do not
 * `revert` if an interface is not supported. It is up to the caller to decide
 * what to do in these cases.
 */
library ERC165Checker {
    // As per the ERC-165 spec, no interface should ever match 0xffffffff
    bytes4 private constant INTERFACE_ID_INVALID = 0xffffffff;

    /**
     * @dev Returns true if `account` supports the {IERC165} interface.
     */
    function supportsERC165(address account) internal view returns (bool) {
        // Any contract that implements ERC-165 must explicitly indicate support of
        // InterfaceId_ERC165 and explicitly indicate non-support of InterfaceId_Invalid
        return
            supportsERC165InterfaceUnchecked(account, type(IERC165).interfaceId) &&
            !supportsERC165InterfaceUnchecked(account, INTERFACE_ID_INVALID);
    }

    /**
     * @dev Returns true if `account` supports the interface defined by
     * `interfaceId`. Support for {IERC165} itself is queried automatically.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsInterface(address account, bytes4 interfaceId) internal view returns (bool) {
        // query support of both ERC-165 as per the spec and support of _interfaceId
        return supportsERC165(account) && supportsERC165InterfaceUnchecked(account, interfaceId);
    }

    /**
     * @dev Returns a boolean array where each value corresponds to the
     * interfaces passed in and whether they're supported or not. This allows
     * you to batch check interfaces for a contract where your expectation
     * is that some interfaces may not be supported.
     *
     * See {IERC165-supportsInterface}.
     */
    function getSupportedInterfaces(
        address account,
        bytes4[] memory interfaceIds
    ) internal view returns (bool[] memory) {
        // an array of booleans corresponding to interfaceIds and whether they're supported or not
        bool[] memory interfaceIdsSupported = new bool[](interfaceIds.length);

        // query support of ERC-165 itself
        if (supportsERC165(account)) {
            // query support of each interface in interfaceIds
            for (uint256 i = 0; i < interfaceIds.length; i++) {
                interfaceIdsSupported[i] = supportsERC165InterfaceUnchecked(account, interfaceIds[i]);
            }
        }

        return interfaceIdsSupported;
    }

    /**
     * @dev Returns true if `account` supports all the interfaces defined in
     * `interfaceIds`. Support for {IERC165} itself is queried automatically.
     *
     * Batch-querying can lead to gas savings by skipping repeated checks for
     * {IERC165} support.
     *
     * See {IERC165-supportsInterface}.
     */
    function supportsAllInterfaces(address account, bytes4[] memory interfaceIds) internal view returns (bool) {
        // query support of ERC-165 itself
        if (!supportsERC165(account)) {
            return false;
        }

        // query support of each interface in interfaceIds
        for (uint256 i = 0; i < interfaceIds.length; i++) {
            if (!supportsERC165InterfaceUnchecked(account, interfaceIds[i])) {
                return false;
            }
        }

        // all interfaces supported
        return true;
    }

    /**
     * @notice Query if a contract implements an interface, does not check ERC-165 support
     * @param account The address of the contract to query for support of an interface
     * @param interfaceId The interface identifier, as specified in ERC-165
     * @return true if the contract at account indicates support of the interface with
     * identifier interfaceId, false otherwise
     * @dev Assumes that account contains a contract that supports ERC-165, otherwise
     * the behavior of this method is undefined. This precondition can be checked
     * with {supportsERC165}.
     *
     * Some precompiled contracts will falsely indicate support for a given interface, so caution
     * should be exercised when using this function.
     *
     * Interface identification is specified in ERC-165.
     */
    function supportsERC165InterfaceUnchecked(address account, bytes4 interfaceId) internal view returns (bool) {
        // prepare call
        bytes memory encodedParams = abi.encodeCall(IERC165.supportsInterface, (interfaceId));

        // perform static call
        bool success;
        uint256 returnSize;
        uint256 returnValue;
        assembly {
            success := staticcall(30000, account, add(encodedParams, 0x20), mload(encodedParams), 0x00, 0x20)
            returnSize := returndatasize()
            returnValue := mload(0x00)
        }

        return success && returnSize >= 0x20 && returnValue > 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC4626.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../token/ERC20/IERC20.sol";
import {IERC20Metadata} from "../token/ERC20/extensions/IERC20Metadata.sol";

/**
 * @dev Interface of the ERC-4626 "Tokenized Vault Standard", as defined in
 * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
 */
interface IERC4626 is IERC20, IERC20Metadata {
    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);

    event Withdraw(
        address indexed sender,
        address indexed receiver,
        address indexed owner,
        uint256 assets,
        uint256 shares
    );

    /**
     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
     *
     * - MUST be an ERC-20 token contract.
     * - MUST NOT revert.
     */
    function asset() external view returns (address assetTokenAddress);

    /**
     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
     *
     * - SHOULD include any compounding that occurs from yield.
     * - MUST be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT revert.
     */
    function totalAssets() external view returns (uint256 totalManagedAssets);

    /**
     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToShares(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
     * scenario where all the conditions are met.
     *
     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
     * - MUST NOT show any variations depending on the caller.
     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
     * - MUST NOT revert.
     *
     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
     * from.
     */
    function convertToAssets(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
     * through a deposit call.
     *
     * - MUST return a limited value if receiver is subject to some deposit limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
     * - MUST NOT revert.
     */
    function maxDeposit(address receiver) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
     *   in the same transaction.
     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewDeposit(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   deposit execution, and are accounted for during deposit.
     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function deposit(uint256 assets, address receiver) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
     * - MUST return a limited value if receiver is subject to some mint limit.
     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
     * - MUST NOT revert.
     */
    function maxMint(address receiver) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
     * current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
     *   same transaction.
     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
     *   would be accepted, regardless if the user has enough tokens approved, etc.
     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by minting.
     */
    function previewMint(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
     *
     * - MUST emit the Deposit event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
     *   execution, and are accounted for during mint.
     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
     *   approving enough underlying tokens to the Vault contract, etc).
     *
     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
     */
    function mint(uint256 shares, address receiver) external returns (uint256 assets);

    /**
     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
     * Vault, through a withdraw call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxWithdraw(address owner) external view returns (uint256 maxAssets);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
     *   called
     *   in the same transaction.
     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
     */
    function previewWithdraw(uint256 assets) external view returns (uint256 shares);

    /**
     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   withdraw execution, and are accounted for during withdraw.
     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);

    /**
     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
     * through a redeem call.
     *
     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
     * - MUST NOT revert.
     */
    function maxRedeem(address owner) external view returns (uint256 maxShares);

    /**
     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
     * given current on-chain conditions.
     *
     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
     *   same transaction.
     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
     *   redemption would be accepted, regardless if the user has enough shares, etc.
     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
     * - MUST NOT revert.
     *
     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
     */
    function previewRedeem(uint256 shares) external view returns (uint256 assets);

    /**
     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
     *
     * - MUST emit the Withdraw event.
     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
     *   redeem execution, and are accounted for during redeem.
     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
     *   not having enough shares, etc).
     *
     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
     * Those methods should be performed separately.
     */
    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/Clones.sol)

pragma solidity ^0.8.20;

/**
 * @dev https://eips.ethereum.org/EIPS/eip-1167[ERC-1167] is a standard for
 * deploying minimal proxy contracts, also known as "clones".
 *
 * > To simply and cheaply clone contract functionality in an immutable way, this standard specifies
 * > a minimal bytecode implementation that delegates all calls to a known, fixed address.
 *
 * The library includes functions to deploy a proxy using either `create` (traditional deployment) or `create2`
 * (salted deterministic deployment). It also includes functions to predict the addresses of clones deployed using the
 * deterministic method.
 */
library Clones {
    /**
     * @dev A clone instance deployment failed.
     */
    error ERC1167FailedCreateClone();

    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
     *
     * This function uses the create opcode, which should never revert.
     */
    function clone(address implementation) internal returns (address instance) {
        /// @solidity memory-safe-assembly
        assembly {
            // Cleans the upper 96 bits of the `implementation` word, then packs the first 3 bytes
            // of the `implementation` address with the bytecode before the address.
            mstore(0x00, or(shr(0xe8, shl(0x60, implementation)), 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000))
            // Packs the remaining 17 bytes of `implementation` with the bytecode after the address.
            mstore(0x20, or(shl(0x78, implementation), 0x5af43d82803e903d91602b57fd5bf3))
            instance := create(0, 0x09, 0x37)
        }
        if (instance == address(0)) {
            revert ERC1167FailedCreateClone();
        }
    }

    /**
     * @dev Deploys and returns the address of a clone that mimics the behaviour of `implementation`.
     *
     * This function uses the create2 opcode and a `salt` to deterministically deploy
     * the clone. Using the same `implementation` and `salt` multiple time will revert, since
     * the clones cannot be deployed twice at the same address.
     */
    function cloneDeterministic(address implementation, bytes32 salt) internal returns (address instance) {
        /// @solidity memory-safe-assembly
        assembly {
            // Cleans the upper 96 bits of the `implementation` word, then packs the first 3 bytes
            // of the `implementation` address with the bytecode before the address.
            mstore(0x00, or(shr(0xe8, shl(0x60, implementation)), 0x3d602d80600a3d3981f3363d3d373d3d3d363d73000000))
            // Packs the remaining 17 bytes of `implementation` with the bytecode after the address.
            mstore(0x20, or(shl(0x78, implementation), 0x5af43d82803e903d91602b57fd5bf3))
            instance := create2(0, 0x09, 0x37, salt)
        }
        if (instance == address(0)) {
            revert ERC1167FailedCreateClone();
        }
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(
        address implementation,
        bytes32 salt,
        address deployer
    ) internal pure returns (address predicted) {
        /// @solidity memory-safe-assembly
        assembly {
            let ptr := mload(0x40)
            mstore(add(ptr, 0x38), deployer)
            mstore(add(ptr, 0x24), 0x5af43d82803e903d91602b57fd5bf3ff)
            mstore(add(ptr, 0x14), implementation)
            mstore(ptr, 0x3d602d80600a3d3981f3363d3d373d3d3d363d73)
            mstore(add(ptr, 0x58), salt)
            mstore(add(ptr, 0x78), keccak256(add(ptr, 0x0c), 0x37))
            predicted := keccak256(add(ptr, 0x43), 0x55)
        }
    }

    /**
     * @dev Computes the address of a clone deployed using {Clones-cloneDeterministic}.
     */
    function predictDeterministicAddress(
        address implementation,
        bytes32 salt
    ) internal view returns (address predicted) {
        return predictDeterministicAddress(implementation, salt, address(this));
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

/// @title IBroadcastRegistry
/// @dev Interface for BroadcastRegistry
/// @author ZeroPoint Labs
interface IBroadcastRegistry {
    //////////////////////////////////////////////////////////////
    //              EXTERNAL WRITE FUNCTIONS                    //
    //////////////////////////////////////////////////////////////

    /// @dev emitted when a payload is broadcasted
    event PayloadSent(address indexed sender);

    /// @dev emitted when a broadcast payload is received
    event PayloadReceived(uint256 indexed payloadId, uint64 indexed srcChainId);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL WRITE FUNCTIONS                    //
    //////////////////////////////////////////////////////////////

    /// @dev allows core contracts to send payload to all configured destination chain.
    /// @param srcSender_ is the caller of the function (used for gas refunds).
    /// @param ambId_ is the identifier of the arbitrary message bridge to be used
    /// @param gasFee_ is the gas fee to be used for broadcasting
    /// @param message_ is the crosschain payload to be broadcasted
    /// @param extraData_ defines all the message bridge related overrides
    function broadcastPayload(
        address srcSender_,
        uint8 ambId_,
        uint256 gasFee_,
        bytes memory message_,
        bytes memory extraData_
    )
        external
        payable;

    /// @dev allows ambs to write broadcasted payloads
    function receiveBroadcastPayload(uint64 srcChainId_, bytes memory message_) external;

    /// @dev allows privileged actors to process broadcasted payloads
    /// @param payloadId_ is the identifier of the cross-chain payload
    function processPayload(uint256 payloadId_) external;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity ^0.8.23;

import { InitSingleVaultData } from "src/types/DataTypes.sol";

/// @title IEmergencyQueue
/// @dev Interface for EmergencyQueue
/// @author ZeroPoint Labs
interface IEmergencyQueue {
    
    //////////////////////////////////////////////////////////////
    //                          EVENTS                          //
    //////////////////////////////////////////////////////////////

    event WithdrawalQueued(
        address indexed receiverAddress,
        uint256 indexed id,
        uint256 indexed superformId,
        uint256 amount,
        uint256 srcPayloadId
    );

    event WithdrawalProcessed(
        address indexed refundAddress, uint256 indexed id, uint256 indexed superformId, uint256 amount
    );

    //////////////////////////////////////////////////////////////
    //              EXTERNAL VIEW FUNCTIONS                     //
    //////////////////////////////////////////////////////////////

    /// @dev returns the execution status of an id in the emergency queue
    /// @param id is the identifier of the queued action
    /// @return boolean representing the execution status
    function queuedWithdrawalStatus(uint256 id) external view returns (bool);

    //////////////////////////////////////////////////////////////
    //              EXTERNAL WRITE FUNCTIONS                    //
    //////////////////////////////////////////////////////////////

    /// @dev called by paused forms to queue up withdrawals for exit
    /// @param data_ is the single vault data passed by the user
    function queueWithdrawal(InitSingleVaultData memory data_) external;

    /// @dev called by emergency admin to processed queued withdrawal
    /// @param id_ is the identifier of the queued action
    function executeQueuedWithdrawal(uint256 id_) external;

    /// @dev called by emergency admin to batch process queued withdrawals
    /// @param ids_ is the array of identifiers of the queued actions
    function batchExecuteQueuedWithdrawal(uint256[] memory ids_) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.20;

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Storage of the initializable contract.
     *
     * It's implemented on a custom ERC-7201 namespace to reduce the risk of storage collisions
     * when using with upgradeable contracts.
     *
     * @custom:storage-location erc7201:openzeppelin.storage.Initializable
     */
    struct InitializableStorage {
        /**
         * @dev Indicates that the contract has been initialized.
         */
        uint64 _initialized;
        /**
         * @dev Indicates that the contract is in the process of being initialized.
         */
        bool _initializing;
    }

    // keccak256(abi.encode(uint256(keccak256("openzeppelin.storage.Initializable")) - 1)) & ~bytes32(uint256(0xff))
    bytes32 private constant INITIALIZABLE_STORAGE = 0xf0c57e16840df040f15088dc2f81fe391c3923bec73e23a9662efc9c229c6a00;

    /**
     * @dev The contract is already initialized.
     */
    error InvalidInitialization();

    /**
     * @dev The contract is not initializing.
     */
    error NotInitializing();

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint64 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that in the context of a constructor an `initializer` may be invoked any
     * number of times. This behavior in the constructor can be useful during testing and is not expected to be used in
     * production.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        // Cache values to avoid duplicated sloads
        bool isTopLevelCall = !$._initializing;
        uint64 initialized = $._initialized;

        // Allowed calls:
        // - initialSetup: the contract is not in the initializing state and no previous version was
        //                 initialized
        // - construction: the contract is initialized at version 1 (no reininitialization) and the
        //                 current contract is just being deployed
        bool initialSetup = initialized == 0 && isTopLevelCall;
        bool construction = initialized == 1 && address(this).code.length == 0;

        if (!initialSetup && !construction) {
            revert InvalidInitialization();
        }
        $._initialized = 1;
        if (isTopLevelCall) {
            $._initializing = true;
        }
        _;
        if (isTopLevelCall) {
            $._initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: Setting the version to 2**64 - 1 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint64 version) {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing || $._initialized >= version) {
            revert InvalidInitialization();
        }
        $._initialized = version;
        $._initializing = true;
        _;
        $._initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        _checkInitializing();
        _;
    }

    /**
     * @dev Reverts if the contract is not in an initializing state. See {onlyInitializing}.
     */
    function _checkInitializing() internal view virtual {
        if (!_isInitializing()) {
            revert NotInitializing();
        }
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        // solhint-disable-next-line var-name-mixedcase
        InitializableStorage storage $ = _getInitializableStorage();

        if ($._initializing) {
            revert InvalidInitialization();
        }
        if ($._initialized != type(uint64).max) {
            $._initialized = type(uint64).max;
            emit Initialized(type(uint64).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint64) {
        return _getInitializableStorage()._initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _getInitializableStorage()._initializing;
    }

    /**
     * @dev Returns a pointer to the storage namespace.
     */
    // solhint-disable-next-line var-name-mixedcase
    function _getInitializableStorage() private pure returns (InitializableStorage storage $) {
        assembly {
            $.slot := INITIALIZABLE_STORAGE
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC-165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[ERC].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[ERC section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/IAccessControl.sol)

pragma solidity ^0.8.20;

/**
 * @dev External interface of AccessControl declared to support ERC-165 detection.
 */
interface IAccessControl {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);

    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC-20 standard as defined in the ERC.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the value of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the value of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves a `value` amount of tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 value) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets a `value` amount of tokens as the allowance of `spender` over the
     * caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 value) external returns (bool);

    /**
     * @dev Moves a `value` amount of tokens from `from` to `to` using the
     * allowance mechanism. `value` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 value) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (token/ERC20/extensions/IERC20Metadata.sol)

pragma solidity ^0.8.20;

import {IERC20} from "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC-20 standard.
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

{
  "remappings": [
    "solmate/=lib/ERC1155A/lib/solmate/src/",
    "ERC1155A/=lib/ERC1155A/src/",
    "@openzeppelin/contracts/=lib/ERC1155A/lib/openzeppelin-contracts/contracts/",
    "ds-test/=lib/ds-test/src/",
    "erc4626-tests/=lib/ERC1155A/lib/openzeppelin-contracts/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts/=lib/ERC1155A/lib/openzeppelin-contracts/",
    "pigeon/=lib/pigeon/src/",
    "solady/=lib/pigeon/lib/solady/",
    "super-vaults/=lib/super-vaults/src/",
    "v2-core/=lib/super-vaults/lib/v2-core/contracts/",
    "v2-periphery/=lib/super-vaults/lib/v2-periphery/contracts/",
    "v3-core/=lib/super-vaults/lib/v3-core/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": false,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"superRegistry_","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"BLOCK_CHAIN_ID_OUT_OF_BOUNDS","type":"error"},{"inputs":[],"name":"ERC1167FailedCreateClone","type":"error"},{"inputs":[],"name":"ERC165_UNSUPPORTED","type":"error"},{"inputs":[],"name":"FAILED_TO_SEND_NATIVE","type":"error"},{"inputs":[],"name":"FORM_DOES_NOT_EXIST","type":"error"},{"inputs":[],"name":"FORM_IMPLEMENTATION_ALREADY_EXISTS","type":"error"},{"inputs":[],"name":"FORM_IMPLEMENTATION_ID_ALREADY_EXISTS","type":"error"},{"inputs":[],"name":"FORM_INTERFACE_UNSUPPORTED","type":"error"},{"inputs":[],"name":"INVALID_BROADCAST_FEE","type":"error"},{"inputs":[],"name":"INVALID_CHAIN_ID","type":"error"},{"inputs":[],"name":"INVALID_FORM_ID","type":"error"},{"inputs":[],"name":"INVALID_FORM_REGISTRY_ID","type":"error"},{"inputs":[],"name":"MSG_VALUE_NOT_ZERO","type":"error"},{"inputs":[],"name":"NOT_BROADCAST_REGISTRY","type":"error"},{"inputs":[],"name":"NOT_EMERGENCY_ADMIN","type":"error"},{"inputs":[],"name":"NOT_PROTOCOL_ADMIN","type":"error"},{"inputs":[],"name":"VAULT_FORM_IMPLEMENTATION_COMBINATION_EXISTS","type":"error"},{"inputs":[],"name":"ZERO_ADDRESS","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"formImplementation","type":"address"},{"indexed":true,"internalType":"uint256","name":"formImplementationId","type":"uint256"},{"indexed":true,"internalType":"uint8","name":"formStateRegistryId","type":"uint8"}],"name":"FormImplementationAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"formImplementationId","type":"uint256"},{"indexed":true,"internalType":"enum ISuperformFactory.PauseStatus","name":"paused","type":"uint8"}],"name":"FormImplementationPaused","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"superRegistry","type":"address"}],"name":"SuperRegistrySet","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"uint256","name":"formImplementationId","type":"uint256"},{"indexed":true,"internalType":"address","name":"vault","type":"address"},{"indexed":true,"internalType":"uint256","name":"superformId","type":"uint256"},{"indexed":false,"internalType":"address","name":"superform","type":"address"}],"name":"SuperformCreated","type":"event"},{"inputs":[],"name":"CHAIN_ID","outputs":[{"internalType":"uint64","name":"","type":"uint64"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"formImplementation_","type":"address"},{"internalType":"uint32","name":"formImplementationId_","type":"uint32"},{"internalType":"uint8","name":"formStateRegistryId_","type":"uint8"}],"name":"addFormImplementation","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint32","name":"formImplementationId_","type":"uint32"},{"internalType":"enum ISuperformFactory.PauseStatus","name":"status_","type":"uint8"},{"internalType":"bytes","name":"extraData_","type":"bytes"}],"name":"changeFormImplementationPauseStatus","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint32","name":"formImplementationId_","type":"uint32"},{"internalType":"address","name":"vault_","type":"address"}],"name":"createSuperform","outputs":[{"internalType":"uint256","name":"superformId_","type":"uint256"},{"internalType":"address","name":"superform_","type":"address"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint32","name":"formImplementationId","type":"uint32"}],"name":"formImplementation","outputs":[{"internalType":"address","name":"formImplementationAddress","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"formImplementationAddress","type":"address"}],"name":"formImplementationIds","outputs":[{"internalType":"uint32","name":"formImplementationId","type":"uint32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint32","name":"formImplementationId","type":"uint32"}],"name":"formImplementationPaused","outputs":[{"internalType":"enum ISuperformFactory.PauseStatus","name":"","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"formImplementations","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint32","name":"formImplementationId","type":"uint32"}],"name":"formStateRegistryId","outputs":[{"internalType":"uint8","name":"formRegistryId","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"vault_","type":"address"}],"name":"getAllSuperformsFromVault","outputs":[{"internalType":"uint256[]","name":"superformIds_","type":"uint256[]"},{"internalType":"address[]","name":"superforms_","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getFormCount","outputs":[{"internalType":"uint256","name":"forms_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint32","name":"formImplementationId_","type":"uint32"}],"name":"getFormImplementation","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint32","name":"formImplementationId_","type":"uint32"}],"name":"getFormStateRegistryId","outputs":[{"internalType":"uint8","name":"formStateRegistryId_","type":"uint8"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"superformId_","type":"uint256"}],"name":"getSuperform","outputs":[{"internalType":"address","name":"superform_","type":"address"},{"internalType":"uint32","name":"formImplementationId_","type":"uint32"},{"internalType":"uint64","name":"chainId_","type":"uint64"}],"stateMutability":"pure","type":"function"},{"inputs":[],"name":"getSuperformCount","outputs":[{"internalType":"uint256","name":"superforms_","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint32","name":"formImplementationId_","type":"uint32"}],"name":"isFormImplementationPaused","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"superformId","type":"uint256"}],"name":"isSuperform","outputs":[{"internalType":"bool","name":"superformIdExists","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes","name":"data_","type":"bytes"}],"name":"stateSyncBroadcast","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"superRegistry","outputs":[{"internalType":"contract ISuperRegistry","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"superforms","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"vaultFormImplementationCombination","type":"bytes32"}],"name":"vaultFormImplCombinationToSuperforms","outputs":[{"internalType":"uint256","name":"superformIds","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"vault","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"name":"vaultToFormImplementationId","outputs":[{"internalType":"uint256","name":"formImplementationId","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"vault","type":"address"},{"internalType":"uint256","name":"","type":"uint256"}],"name":"vaultToSuperforms","outputs":[{"internalType":"uint256","name":"superformIds","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"xChainPayloadCounter","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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